Further generalization of the Dubovicki-Milutin theorem

Combining the results of Walczak (Ref. 1) and Lasiecka (Refs. 2 and 3), we extend the well-known Dubovicki-Milutin theorem in two directions: (i) We allow for treatment of several equality constraints in optimization problems; and (ii) We assume less regularity of optimization problems by requiring the existence of external cones instead of tangent cones. An example of an optimization problem is also considered.     

Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.     

Dimensional variation in production of high-aspect-ratio micro-pillars array by micro powder injection molding

Micro powder injection molding (μPIM) is one of the potential processes for the mass production of metallic microstructures and micro components. Here, μPIM is the miniaturization of conventional PIM, which involves four processing steps: mixing, injection molding, debinding and sintering. This paper looks into the feasibility and effectiveness of μPIM as a key mass production process for the fabrication of metallic micro components. For it to be an effective re-production process, it is imperative to examine how well parts can be duplicated/fabricated from a master mold. In this work, the dimensional variation of high-aspect-ratio micro-pillars arrays, in particular the dimensional shrinkage, global warpage, and surface roughness at each stage of the μPIM process for a range of molding pressures, are quantified and compared in detail. The sensitivity of the dimensional variation of the microstructures to the packing pressure is reported. The mechanism behind the dimensional variation is analyzed. PACS 81.20.Ev; 81.20.Hy; 81.70.Fy; 07.60.Ly; 81.05.-t     

Generalization of Einstein relation for doped organic semiconductors

Under the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation for electron and hole transport in doped organic semiconductor thin films are developed. Numerical calculations show that, although traditional Einstein relation still holds for low carrier concentrations, that is, the diffusion-coefficient-to-mobility ratio in units of k_BT/q, with k_B the Boltzmann’s constant, T the temperature and q the elementary charge, equals 1. But when the electron (hole) concentration is high, the diffusion-coefficient-to-mobility ratio for electrons (holes) changes strongly with the electron (hole) concentration, the doping level, the mean energy of LUMOs (HOMOs) of the dopant E_Ld (E_Hd) and the host E_L (E_H), as well as their variances. Dopants with E_Ld<E_L (E_Hd>E_H) affect the diffusion-coefficient-to-mobility ratio mainly in the range of low and middle carrier concentrations, while those with E_Ld>E_L (E_Hd<E_H) have significant effect only in the range of high carrier concentrations. It was found that there can be a maximum in the dependence of the diffusion-coefficient-to-mobility ratio on the quasi-Fermi energy or carrier concentration exist, for appropriate values of the doping level, the mean energy and variance of LUMO or HOMO states of the dopant. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

Radio-frequency controllable quantum interference in Mössbauer spectroscopy

The role of quantum interference (QI) in spectra of the resonant Mössbauer scattering is investigated. As a mechanism ensuring the QI conditions, the radio-frequency (RF) mixing of the spin sublevels of the excited nuclear state is considered. It is shown that QI leads to a significant intensity redistribution of the elastic and Raman scattering.     

Microelectromagnet for magnetic manipulation in lab-on-a-chip systems

We demonstrate a simple scheme for fabrication of microelectromagnets consisting of planar spiral coils semi-encapsulated in soft magnetic yokes using conventional microfabrication techniques. The microelectromagnets are suitable for applications operating at frequencies below 250 kHz. Conventional fabrication schemes for planar microelectromagnets typically rely on five mask steps. We allow the current to flow in the soft magnetic yoke and thereby two mask steps are eliminated. We have characterized the electromagnets electrically, the results agree well with theory, and the implications arising from current flowing in the magnetic yoke are discussed. We have integrated the microelectromagnets with microfluidic channels, and demonstrated separation of commercially available magnetic beads from a fluid in a microfluidic system, i.e. a lab-on-a-chip system.     

Epimerization, diastereoselectivity and hemilability in dicationic chiral ruthenium complexes with bidentate (PS) bisphosphine monosulfide ligands

The binding of heterobidentate P^∧S ligands introduces metal-centered chirality to the planar chiral parent complex Ru(η⁶:η¹-NMe₂C₆H₄C₆H₄PCy₂)Cl₂. Observed diastereomeric ratios for the kinetic product vary dramatically depending upon ring size of the chelate formed with the P^∧S ligand. The complexes epimerize very slowly to thermodynamic product ratios that are substantially different from the kinetic product ratios.     

Implicit difference approximation for the two-dimensional space-time fractional diffusion equation

In this paper, we consider a two-dimensional fractional spacetime diffusion equation (2DFSTDE) on a finite domain. We examine an implicit difference approximation to solve the 2DFSTDE. Stability and convergence of the method are discussed. Some numerical examples are presented to show the application of the present technique.