More than three decades of ISOLDE physics

The ISOLDE on-line isotope separator started its operation in an external beam from the CERN SC in 1967. Since then there has been a steady development of its technical performance and its physics programme so that ISOLDE today is a major facility at CERN. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of the spectral diffusion kernel of a protein by single-molecule spectroscopy

The spectral dynamics of individual bacterial light-harvesting-2 pigment-protein complexes have been studied at 1.4 K. The data provided the spectral diffusion kernel of the optical transitions of the embedded B800 bacteriochlorophyll a pigments. This kernel can be described by either a single Gaussian function or a superposition of Gaussian functions. Moreover, we found that the chromophores interact with two classes of TLSs that can be distinguished by their distance from the chromophore and are most likely located outside (class 1) and inside (class 2) the protein matrix.     

Electrical analogy of transient heat flow in laser rods

An analog circuit is presented for the determination of the transient thermal profile in optically pumped laser rods. The model can be used to simulate the behavior of solid and hollow cylindrical rods under single shot and repetition rate conditions. The design of a particular circuit is given as well as experimental results.     

InP(001)-(2 x 1) surface: a hydrogen stabilized structure

The InP(001)(2 x 1) surface has been reported to consist of a semiconducting monolayer of buckled phosphorus dimers. This apparent violation of the electron counting principle was explained by effects of strong electron correlation. Combining first-principles calculations with reflectance anisotropy spectroscopy and LEED experiments, we find that the (2 x 1) reconstruction is not at all a clean surface: it is induced by hydrogen adsorbed in an alternating sequence on the buckled P dimers. Thus, the microscopic structure of the InP growth plane relevant to standard gas phase epitaxy conditions is resolved and shown to obey the electron counting rule.     

1-Ethoxycarbonyl-3-ferrocenyl-propan-1,3-dion und Ferrocen-1,1'bis(2,4-dioxobutansäureethylester) als Liganden für Übergangsmetallionen. Kristallstruktur von Bis(1-ethoxycarbonyl-3-ferrocenyl-propan-1,3dionato)kupfer(II)

1-Ethoxycarbonyl-3-ferrocenyl-propane-1,3-dion and Ferrocene-1,1′bis(2,4-dioxobutanoic acid ethylester) as Ligands for Transition Metal Ions. Crystal Structure of Bis(1-ethoxycarbonyl-3-ferrocenyl-propane-1,3dionato)copper(II) The ligands 1-ethoxycarbonyl-3-ferrocenyl-propane-1,3-dion and ferrocene-1,1′-bis(2,4-dioxo-butanoic acid ethylester) have been prepared by reaction of acetylferrocene or 1,1′-diacetylferrocene and diethyl oxalate. They yield neutral chelates with Cu^II, Ni^II, Zn^II, Co^II, and Mn^II. The acid dissociation constants of the ligands and the stability constants of their metal complexes including Fe^II complexes are reported. The structure of bis(1-ethoxycarbonyl-3-ferrocenyl-propane-1,3-dionato)copper(II) was determined by X-ray structure analysis. A cis arrangement with a nearly square planar coordination sphere at the Cu atom is found.     

Short-term changes in carbon isotope composition of soluble carbohydrates and starch: from canopy leaves to the root system

Changes in the 13C discrimination of current leaf photosynthesis might have profound impacts on root respiratory substrates. Therefore, the aim of this study was (1) to refine a method for the isolation of root and leaf starch and soluble sugars (neutral fraction) for stable carbon isotope analysis and (2) to assess the short-term temporal variability of the C isotope composition (delta13C) of starch and of the neutral fraction of beech roots and leaves at different canopy heights. An existing method for isolating starch for stable C isotope analysis based on enzymatic hydrolysis was modified to account for the low starch content of the samples. This was achieved by removing the enzyme (alpha-amylase) by ultrafiltration after the hydrolysis, resulting in very low carbon blanks. The neutral fraction was separated from organic acids and cations by ion-exchange chromatography. An anion-exchange resin in the [HCO3]--form was chosen that ensured high precision of C blanks. Beech leaves at 5, 10 and 20 m above the forest floor as well as roots were sampled six times during a day/night cycle in July 2003. Delta13C values of bulk material, starch and the neutral fraction increased from the lower to the higher canopy with mean differences between 5 and 20 m of 3.8, 3.4 and 2.7 per thousand for the delta13C values of starch, neutral fraction and bulk foliage, respectively. The delta13C value of foliar starch increased from the morning to the afternoon and decreased during the night, but diurnal differences (up to 3.1 per thousand) were only statistically significant for leaves sampled at 5 and 10 m height. In roots, no diurnal variation in the delta13C of starch was observed during the short time frame of one day and the delta13C of the neutral fraction did not differ between samples taken at 16:30 and 22:00. Calculated delta13C values of starch, which was mobilised during the night, were more positive than the total starch (all sampling times pooled) in leaves. Furthermore, the delta13C values of mobilised starch were approximately 5 per thousand more positive than that of the mobilised neutral fraction. Hence, the delta13C of potential sources for export from canopy leaves to roots varied considerably in their C isotope composition.     

Synthese und Kristallstruktur des Goldclusters [Au16(AsPh3)8Cl6]

Synthesis and Structures of the Gold Cluster [Au₁₆(AsPh₃)₈Cl₆] Reduction of Ph₃AsAuCl with NaBH₄ in ethanol yields the gold cluster [Au₁₆(AsPh₃)₈Cl₆]. It can be crystallized from dichloromethane/diisopropyl ether in form of dark red, light sensitive crystals with the space group P2₁/n and a = 1777.68(8), b = 3372.7(1), c = 2696.2(1)pm, β = 94.166(6)°, Z = 4). The inner skeleton of the 16 Au atoms consists of a centered icosahedron of which one of the corners binds to three additional Au atoms forming a tetrahedron pendent. The shortest Au–Au distances of 264.3 to 266.6 pm correspond to the bonds to the three external Au atoms. Within the icosahedron the distances between the central atom and the peripheral atoms (273.0–279.1 pm) are distinctly shorter than the distances between the peripheral atoms (283.6–299.0 pm).     

Electrochemical Oxidation of Ibuprofen and Its Voltammetric Determination at a Boron‐Doped Diamond Electrode

The electrochemical oxidation of ibuprofen at a boron‐doped diamond electrode (BDDE) and its voltammetric determination is reported for the first time. A well‐defined oxidation peak was observed at around 1.6 V in 0.1 mol L^?1 H₂SO₄ solution with 10 % (v/v) ethanol at the BDDE surface activated by either cathodic or anodic pretreatments. A differential‐pulse voltammetric method for the determination of ibuprofen in pharmaceutical formulations was optimized with a detection limit of 5 µmol L^?1 and compared with the British Pharmacopeia method.     

DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils

Suspensions of commercial refined beech pulp (RBP) were further processed through mechanical disintegration (MD-RBP), chemical modification (CM-RBP) and through chemical modification followed by mechanical disintegration (CM-MD-RBP). Nanocomposites were prepared by compounding a poly(vinyl acetate) (PVAc) latex adhesive with increasing contents of the different types of nanofibrils, and the resulting nanocomposites were analyzed by dynamic mechanical analysis (DMA). Also, the suitability of using the CM-RBP fibrils to formulate PVAc adhesives for wood bonded assemblies with improved heat resistance was studied. The presence of cellulose nanofibrils had a strong influence on the viscoelastic properties of PVAc latex films. For all nanocomposites, increasing amounts of cellulose nanofibrils (treated or untreated) led to increasing reinforcing effects in the glassy state, but especially in the PVAc and PVOH glass transitions. This reinforcement primarily resulted from interactions between the cellulose fibrils network and the hydrophilic PVOH matrix that led to the complete disappearance of the PVOH glass transition (tan δ peak) for some fibril types and contents. At any given concentration in the PVOH transition, the CM-MD-RBP nanofibrils provided the highest reinforcement, followed by the MD-RBP, CM-RBP and the untreated RBP. Finally, the use of the CM-RBP fibrils to prepare PVAc reinforced adhesives for wood bonding was promising since, even though they generally performed worse in dry and wet conditions, the boards showed superior heat resistance (EN 14257) and passed the test for durability class D1.     

Einsatz von Hochleistungs-Trennkapillaren in der GC.-EIMS./GC.-CIMS.-Analyse: Eine Möglichkeit zur massenspektrometrischen Doppelbindungscharakterisierung in komplexen Monoalkengemischen

In an attempt to determine position and substitution of double bonds in complex mixtures of straight-chain and branched monoalkenes without actually isolating the constituents, GC.-MS. analysis is performed after in-batch preparation of derivatives of a judiciously chosen type. Cyclic phenylboronates (4,5-substituted 2-phenyl-1,3,2-dioxaborols) are prepared from 1,2-diols which are, in turn, obtained from the original alkenes by treatment with osmium tetroxide. Chemical ionization mass spectrometry (CIMS.) is used in addition to conventional electron impact techniques (EIMS.) in sequential GC./CIMS.- and GC./EIMS.runs, yielding complementary structural information for the single components of the mixture. In order to cope with the potential severity of the separation problem, high-efficiency glass capillary columns were employed throughout. The performance of the system used is demonstrated by a complete double bond analysis of a 35-component mixture of monoalkenes in the C₅ to C₉ range.