Two-part fractional regression model with conditional FDH responses: an application to Brazilian agriculture

We extend the notion of a two-part fractional regression model with conditional free disposal hull efficiency responses to accommodate two-stage regression analysis. The two-part regression model includes the binomial model with a nonlinear specification for the expected response in (0,1] and is a more general formulation in the context of fractional regressions. We use nonlinear least squares to assess the effect of covariates in the conditional efficiency response. The approach is applied to Brazilian agricultural county data, as reported in the Brazilian agricultural census of 2006. The efficiency measure is output oriented and assumes variable returns to scale. Output is rural gross income and inputs are land expenses, labor expenses and expenses on other technological inputs. The covariates affecting production are credit, technical assistance, a rural development index, income concentration, measured by the Gini index, and regional dummies. Overall Brazilian rural production performance responds positively to all covariates.

     

Speciation of chromium in river water samples contaminated with leather effluents by flame atomic absorption spectrometry after separation/preconcentration by cloud point extraction

In the present work, a cloud point extraction (CPE) system has been proposed for determination of species de chromium in the natural water samples, Cr(III) and Cr(VI). The procedure was based on the reaction of Cr(III) with 1-(2-pyridilazo)-2-naphtol (PAN) in a surfactant solution (Triton X-114) yielding a hydrophobic complex, which then is entrapped “in situ” in the surfactant micelles. When the temperature of the system was higher than the cloud point of Triton X-114, the complex of Cr(III)-PAN entered the surfactant-rich phase and thus separation of the analyte from the matrix was achieved. Separation of the two phases was accomplished by centrifugation for 15 min at 2500 rpm. The Cr(VI) assay is based on its reduction to Cr(III) by ascorbic acid which subsequently reacts with PAN in a similar manner. The main factors affecting the cloud point extraction, such as complexation pH (7.7), buffer concentration (0.025 mol L^{− 1}) and microwave irradiation time (10 min) were optimized by response surface methodology (RSM) using Box–Behnken design. Under the optimized conditions, the preconcentration system (50 mL sample) permitted an enrichment factor of 48, linear range of 2.5–80 μg L^{− 1}, limit of detection and quantification of 0.7 and 2.5 μg L^{− 1}, respectively, and the relative standard deviation (n = 10) of 2.0% for 50 μg L^{− 1} Cr(III) solution and (n = 10) 5.5% for 10 μg L^{− 1}. The proposed procedure was applied to the speciation of chromium in river water samples. The procedure affords recoveries of 84–115% and a relative standard deviation lower than 4.2%. The analytical results of total chromium in the river water samples under study agreed well with those by electrothermal atomic absorption spectrometry (ET AAS). It is proved that the procedure can be successfully employed as an alternative to the commonly used preconcentration and speciation analytical techniques.     

Multivariate analysis applied to some elements in human fluids and whole bloods of hemodialysis patients determined by INAA

This research is a framework of a big project aimed to the knowledge of human metabolism in hemodialysis patients. For reaching high sensitivity and obtaining accurate values for elements at very low concentrations Instrumental neutron activation analysis (INAA) was used for its characteristics to be a primary analytical method and because it does not require any chemical–physical pretreatment. The samples analyzed (160) are representative of groups of homogeneous population and specific matrices (hemodialysis fluids and whole human blood). The irradiation was performed in the rotating rack (Lazy Susan) of the Triga Mark II reactor of the R.C. Casaccia-ENEA at a neutron flux of 2.6 × 10¹² n cm^?2 s^?1 with an irradiation time of 12 h. The results on the hemodialysis fluids report the values and the behavior of selected trace elements: the levels of Br and Na show a decrease between the pre- and post-dialysis whereas Fe, K and Zn an increase. The other elements such as Cs, Rb and Se seem to keep constant between the two phases. Similar data are found for the whole human blood for the same selected elements. Finally, exploiting the INAA peculiarity it has been investigated the levels of trace and ultra-trace elements interesting from a toxicological (Hg, Ni, Sb) and nutritional (Co, Cr) point of view and seldom determined due to their analytical implications. Finally, a chemiometric investigation performed through dendrogram trees, Canonical discriminant analysis and principal component analysis, has evidenced the similar effects of the HF, HDF and BIC-treatments on the investigated fluids respect to the CAPD dialysis.     

Drude's model calculation rule on electrical transport in Sb-doped SnO2 thin films, deposited via sol-gel

The evaluation of free carrier concentration based on Drude's theory can be performed by the use of optical transmittance in the range 800-2000 nm (near infrared) for Sb-doped SnO₂ thin films. In this article, we estimate the free carrier concentration for these films, which are deposited via sol-gel dip-coating. At approximately 900 nm, there is a separation among transmittance curves of doped and undoped samples. The plasma resonance phenomena approach leads to free carrier concentration of about 5×10²⁰ cm⁻³. The increase in the Sb concentration increases the film conductivity; however, the magnitude of measured resistivity is still very high. The only way to combine such a high free carrier concentration with a rather low conductivity is to have a very low mobility. It becomes possible when the crystallite dimensions are taken into account. We obtain grains with 5 nm of average size by estimating the grain size from X-ray diffraction data, and by using line broadening in the diffraction pattern. The low conductivity is due to very intense scattering at the grain boundary, which is created by the presence of a large amount of nanoscopic crystallites. Such a result is in accordance with X-ray photoemission spectroscopy data that pointed to Sb incorporation proportional to the free electron concentration, evaluated according to Drude's model.     

High beam quality in a HyBrID copper laser operating with an unstable resonator made of a concave mirror and a plano-convex BK7 lens

This paper presents a very simple unstable resonator, made of a concave mirror (total reflector) and a bare plane–convex BK7 lens working as a convex coupling mirror, which is quite efficient for HyBrID copper laser. In addition to a good quality factor (M²=4.9), experimental results showed that it is possible to control the laser output power by introducing a variable aperture iris inside the cavity, close to the coupling lens, without spoiling beam quality. A rough theoretical model helped to explain these results as a combined effect of unstable resonator plus radial gain distribution.     

Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO₂ and NO_X removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and treatment of effluent from petroleum production units and liquid irradiation process to treat vessel water ballast. On the other hand, there is a growing need of mobile EB facilities for different applications in South America.     

A Clustering Search metaheuristic for the Point-Feature Cartographic Label Placement Problem

The Point-Feature Cartographic Label Placement (PFCLP) problem consists of placing text labels to point features on a map avoiding overlaps to improve map visualization. This paper presents a Clustering Search (CS) metaheuristic as a new alternative to solve the PFCLP problem. Computational experiments were performed over sets of instances with up to 13,206 points. These instances are the same used in several recent and important researches about the PFCLP problem. The results enhance the potential of CS by finding optimal solutions (proven in previous works) and improving the best-known solutions for instances whose optimal solutions are unknown so far.     

Humic Acid Improves Zn Fertilization in Oxisols Successively Cultivated with Maize–Brachiaria

Zinc (Zn) is an essential micronutrient for plant growth, and Zn deficiency is a global issue, especially in tropical soils. This study aimed to investigate the effects of humic acid (HA) and the Zn addition (Zn sulfate + HA) on the growth of maize and brachiaria in two contrasting Oxisols. The potential complexation of Zn sulfate by HA was evaluated by Fourier-transform infrared (FTIR) spectroscopy analysis. Zinc content and its availability in solution and the shoot and root biomass of maize and brachiaria were determined. FTIR spectroscopy revealed the complexation of Zn sulfate by HA through its S and C functional groups. In both Oxisols, solution Zn increased due to the combined use of Zn and HA. In a soil type-dependent manner, maize biomass and Zn in its shoots were affected only by the exclusive use of Zn fertilization. In the Yellow Oxisol, brachiaria growth and Zn accumulated in its shoot were positively affected by the combined use of Zn fertilization with HA. In the Oxisol with lower organic matter content, HA can assure adequate supplying of residual Zn, while increasing growth of brachiaria cultivated in sequence to maize.     

A new generation of track etched membranes for microfiltration and ultrafiltration. Part I. Preparation and characterisation

A new experimental apparatus for porous track etched membrane production has been designed, tested and installed near the core of the IEA-R1 nuclear reactor at IPEN-Sao Paulo. The thermal neutron flux close to the centre of the reactor core has been used to produce fission fragments from uranium sample which was deposited on a rod located at the centre of an evacuated aluminium chamber.