Structure relates to elastic recoil and functional role in quadriceps tendon and patellar ligament

Tendons and ligaments have similar but slightly different structure and composition. Crimps of tendons and ligaments are morphological structures related to the elastic functional properties of these connective tissues. Aim of this study was to investigate the morphological arrangement of collagen fibres, fibrils and crimping pattern of suprapatellar (rectus femoris tendon-RFT and vastus intermedius tendon-VIT) and infrapatellar connective tissues (patellar ligament-PL) to relate their structural aspects to their common function role of leg extension. RFT, VIT and PL were removed from knees of Sprague–Dawley rats and light and electron microscopy (TEM and SEM) performed. Sagittal sections showed that collagen array and crimping pattern were similar in RFT and PL but differed from VIT. Morphometric analysis confirmed that crimp number was about the same in RFT and PL (5.4 ± 1.4 and 6.1 ± 2.8 respectively), but it was almost three times higher in VIT (14.5 ± 4.7). Similarly crimp top angle in RFT and PL (141.5 ± 15.0° and 146.2 ± 12.2° respectively) was significantly higher than in VIT (122.3 ± 14.8°) and the crimp base length was more than twice as wide in RFT (75.5 ± 22.6 μm) and PL (72.3 ± 28.9 μm) than in VIT (36 ± 14.1 μm). The smaller, fewer and most crimped crimps in VIT show that this tendon has a greater elastic recoil and responds to higher forces as among quadriceps muscles the vastus intermedius belly contributes the most during knee extension. By contrast, RFT acting as a “stopper” tendon also plays a ligament role by limiting an excessive flexion of the joint during postural rest position of the knee.     

Determination of hexavalent chromium in exhaled breath condensate and environmental air among chrome plating workers

Chromium speciation has attracted attention because of the different toxicity of Cr(III), which is considered relatively non-toxic, and Cr(VI), which can cross cell membranes mainly as a chromate anion and has been classified as a class I human carcinogen. The aims of the present study were to measure soluble Cr(VI) levels in environmental samples, to develop a simple method of quantifying Cr(VI) in exhaled breath condensate (EBC), and to follow the kinetics of EBC Cr(VI) in chrome plating workers.Personal air samples were collected from 10 chrome platers; EBC was collected from the same workers immediately after the work shift on Tuesday and before the work shift on the following Wednesday. Environmental and EBC Cr(VI) levels were determined by means of colorimetry and electrothermal absorption atomic spectrometry, respectively.The method of detecting Cr(VI) in environmental air was based on the extraction of the Cr(VI)-diphenylcarbazide (Cr(VI)-DPC) complex in 1-butanol, whereas EBC Cr(VI) was determined using a solvent extraction of Cr(VI) as an ion pair with tetrabutylammonium ion, and subsequent direct determination of the complex (Cr(VI)-DPC) in EBC.Kinetic data showed that airborne Cr(VI) was reduced by 50% in airway lining fluid sampled at the end of exposure and that there was a further 50% reduction after about 15 h. The persistence of Cr(VI) in EBC supports the use of EBC in assessing target tissue levels of Cr(VI).     

On the Wave Equation Associated to the Hermite and the Twisted Laplacian

The dispersive properties of the wave equation u _tt +Au=0 are considered, where A is either the Hermite operator −Δ+|x|² or the twisted Laplacian −(∇ _x −iy)²/2−(∇ _y +ix)²/2. In both cases we prove optimal L ¹−L ^∞ dispersive estimates. More generally, we give some partial results concerning the flows exp (itL ^ν ) associated to fractional powers of the twisted Laplacian for 0<ν<1.     

Modeling the spatial spread of infectious diseases: the GLobal Epidemic and Mobility computational model

Here we present the Global Epidemic and Mobility (GLEaM) model that integrates sociodemographic and population mobility data in a spatially structured stochastic disease approach to simulate the spread of epidemics at the worldwide scale. We discuss the flexible structure of the model that is open to the inclusion of different disease structures and local intervention policies. This makes GLEaM suitable for the computational modeling and anticipation of the spatio-temporal patterns of global epidemic spreading, the understanding of historical epidemics, the assessment of the role of human mobility in shaping global epidemics, and the analysis of mitigation and containment scenarios.     

Historical organic dyes: a surface‐enhanced Raman scattering (SERS) spectral database on Ag Lee–Meisel colloids aggregated by NaClO4

In the present study, several natural organic dyes used in antiquity, especially in textile dyeing, were analysed by surface‐enhanced Raman scattering (SERS) spectroscopy, in order to build a wide database that could integrate the data previously published in the literature. In particular, we reported for the first time the SERS spectra of 11 dyes: dragon's blood, sandalwood, annatto, safflower yellow and red, old fustic, gamboge, catechu, kamala, aloe and sap green. Silver colloids (Ag colloids) prepared according to the Lee–Meisel procedure, i.e. by reduction of a silver nitrate (AgNO₃) aqueous solution with trisodium citrate dihydrate, were used as substrate. As its efficiency had been tested in a previous work, sodium perchlorate (NaClO₄) 1.8 M was again employed as aggregating agent, giving the best results when added to the silver nanoparticles after the analyte. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural changes of conjugated pt-containing polymetallaynes exposed to gamma ray radiation doses

The effect of (60)Co gamma rays irradiation on the polymetallayne [-Pt(PBu(3))-C≡C-C(6)H(4)-C(6)H(4)-C≡C-](n) (Pt-DEBP) of defined chain length corresponding to 10 repeat units, has been studied in detail. The UV-vis absorption spectra of Pt-DEBP have been recorded in solution upon exposure of the polymetallayne at increasing radiation doses in the range up to 90 Gy, with special care to the features related to low doses. Complex modifications of the chemical structure of Pt-DEBP could be accessed through NMR, FTIR, GPC, and XPS characterizations, which support the attack of Cl and H radicals coming from the radiolysis of the solvent, CHCl(3), to the triple C≡C bonds of the backbone, leading to the formation of chlorinated double and single C-C bonds, with a concomitant increase of the molecular weight due to a recombinant effect of oligomer fragments upon irradiation. The presence of vinyl and single chlorinated moieties has been sustained from the simulation of the UV-vis spectra based on theoretical calculations.     

Iron doping of lithium niobate by thermal diffusion from thin film: study of the treatment effect

Thermal diffusion from thin film is one of the most widespread approaches to prepare iron doped regions in lithium niobate with limited size for photorefractive applications. In this work, we investigate the doping process with the aim of determining the best process conditions giving a doped region with the characteristics required for photorefractive applications. Six samples were prepared by changing the atmosphere employed in the diffusion treatment in order to obtain different combination of diffusion profiles and reduction degrees and also to check the effect of employing a wet atmosphere. The compositional, optical, and structural properties are then extensively characterized by combining Secondary ion Mass Spectrometry, UV, visible and IR spectrophotometry, High Resolution X-Rays Diffraction, and Micro-Raman Spectroscopy. Moreover, the sample topography was checked by Atomic Force Microscopy. An analysis of all our data shows that the best results are obtained performing a double step process, i.e. diffusion in oxidizing atmosphere and subsequent reduction at lower temperature in an hydrogen-containing atmosphere.     

Templateless synthesis of polypyrrole nanowires by non-static solution-surface electropolymerization

Polypyrrole nanowires (PPy-NWs) are synthesized by a novel templateless approach based on non-static solution-surface (NSSS) electropolymerization. The mechanism responsible for PPy-NW formation is the simultaneous oxidation of pyrrole and water, with concomitant formation of hydroxyl radicals and dioxygen nanobubbles. In particular, a localized PPy-NW deposition at the solution-air interface is enabled by solution-surface electropolymerization due to the surface excess of the monomer at the interface favored by the large surface tension of the solvent. In the proposed approach, solution-surface electropolymerization is performed in non-static conditions (NSSS), as the solution-air interface is shifted by flowing the electrolyte solution over the electrode surface. This allows a PPy-NW homogeneous deposition on whatever large area electrode to be rapidly achieved. Parameters influencing the morphology of PPy-NWs are studied, particularly focusing on flow rate, pH of the electrolyte solution, and electropolymerization time. The growth process of PPy-NWs is examined and the way of tuning their resulting morphology is discussed. Morphological investigation by scanning electron microscopy and chemical/electrochemical characterization of PPy-NWs by X-ray photoelectron spectroscopy and cyclic voltammetry, respectively, further support the proposed nanowire formation mechanism. Nanowires with diameter in the range of 40–300 nm are obtained, and the possibility of depositing differently sized nanowires with a predetermined spatial distribution on the same substrate is also demonstrated.