4-t-Butylphenoxo complexes of oxovanadium(V)

Summary Complexes of composition [VOCl₂(OC₆H₄Bu-t-4)] (1) and [VOCl(OC₆H₄Bu-t-4)₂] (2) have been synthesized by the reaction of VOCl₃ with equimolar and bimolar amounts, respectively, of 4-t-BuC₆H₄OSiMe₃ in CCl₄ and characterized by physio-chemical techniques. The complexes react with -hydroxyaldehydes and ketones such as 2-hydroxybenzaldehyde (salicylaldehyde, salH), and 2-hydroxy-2-phenylacetophenone (benzoin, benzH), 2-hydroxyacetophenone (hapH) and also with the potassium salt of p-chlorobenzohydroxamic acid (KBHACl) in 11 and 12 molar ratios, to yield five- and six-coordinate complexes.     

One-Pot Convenient and High Yielding Synthesis of Dithiocarbamates

Summary. A convenient and high yielding method for the synthesis of diverse dithiocarbamates having various substituents including alkyl, aryl, heteroaryl, and alkylaryl at the thiol chain or at the amine chain or at both thiol and amine chains were developed by the one-pot reaction of mercaptans, amines, and bis(benzotriazolyl)methanethione in presence of amidine base under mild reaction conditions.     

On the long-lived transient absorption observed in nanosecond laser photolysis studies of two polymethine cyanine dyes

It is shown that the long-lived transient absorption which is observed when solutions of cryptocyanine and DDI (1, 1′-diethyl-2, 2′-dicarbocyanine iodide) in methanol and other alcohols are exposed to nanosecond ruby laser pulses arises from a photoproduct whose formation requires consecutive absorption of two photons.     

Lipid-protein interactions in the membrane: studies with model peptides

We have used fluorescence quenching of tryptophan-containing trans-membrane peptides by bromine-containing phospholipids to study the specificity of peptide-lipid interactions. We have synthesized peptides Ac-K2GLm WLnK2A-amide where m = 7 and n = 9 (L16) and m = 10 and n = 12 (L22). Binding constants of L22 for dioleoylphosphatidylserine [di(C18 : 1)PS] or dioleoylphosphatidic acid [di(C18 : 1)PA] relative to dieoleoylphosphatidylcholine [di(C18 : 1)PC] were close to 1. However, for L16, whilst the bulk of the di(C18 : 1)PA molecules bound with a binding constant relative to di(C18 : 1)PC close to 1, a small number of di(C18 : 1)PA molecules bound much more strongly. Assuming just one high affinity binding site on L16 for anionic lipid, the affinity of the site for di(C18 : 1)PS was calculated to be ca. 8 times that for di (C18 : 1)PC. The relative binding constant was little affected by ionic strength and close contact between the anionic headgroup of di(C18 : 1)PS and a lysine residue on the peptide was suggested. The relative binding constant for di(C18 : 1)PS at this high affinity site was less than for di(C18 : 1)PA. Cholesterol interacts with L22 with an affinity about 0.7 of that of di(C18 : 1)PC. The structure of the peptide itself is important. The peptide Ac-KKGYL6WL8YKKA-amide (Y2L14) incorporated into bilayers of dinervonylphosphatidylcholine [di(C24 : 1)PC] whereas L16 did not incorporate into this lipid. It is suggested that thinning of a lipid bilayer around a peptide to give optimal hydrophobic matching is less energetically unfavourable when a Tyr residue is located in the lipid/water interfacial region.     

Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.     

The robinson annulation of some medium ring size 2-hydroxymethylenecyclanones

The adducts formed from methyl vinyl ketone and the 2-hydromethylene derivatives of cyclooctane and cyclodecanone can be cyclised to spiroketones containing the same number of C atoms. The spiroketone from cyclooctanone possesses a single UV maximum at 227 nm; the cyclodecanone compound has a further absorption at ca 246 nm. The constitution and stereochemistry of the ketols produced from the adducts under mild cyclising conditions have been investigated.     

Microwave assisted synthesis of an unusual dinitro phytochemical

A novel dinitro secondary metabolite, 2-nitro-4-(2^′-nitroethenyl)phenol from a marine source, has been prepared via highly accelerated, microwave assisted, nitration reactions using mild reagents. ipso-Substitution of a carboxy group by a nitro group is discussed.     

Solvolytic behaviour and the solubilities of various inorganic compounds, lewis acids and bases in fused monobromo acetic acid solvent system—II

Solubilities and the solvolytic behaviour of various inorganic compounds, Lewis acids and bases in fused monobromoacetic acid at 60 ± 0.5°C are discussed. Ionic compounds are fairly soluble, iodides and thiocyanates being comparatively more soluble than chlorides and bromides. Tetraalkyl ammonium halides are highly soluble in this solvent. Conductometric and spectroscopic studies of various Lewis acids and bases in fused monobromoacetic acid indicate their solvolytic behaviour and their subsequent ionization. The solvolyses products BBr₃·CH₂BrCOOH and SbCl₅·CH₂BrCOOH have been observed to be the strongest Bronsted acids. Auto-ionization of this solvent has been supported by acid/base titrations.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Chemometric analysis of groundwater quality data of alluvial aquifer of Gangetic plain, North India

Water quality data set from the alluvial region in the Gangetic plain in northern India, which is known for high fluoride levels in soil and groundwater, has been analysed by chemometric techniques, such as principal component analysis (PCA), discriminant analysis (DA) and partial least squares (PLS) in order to investigate the compositional differences between surface and groundwater samples, spatial variations in groundwater composition and influence of natural and anthropogenic factors. Trilinear plots of major ions showed that the groundwater in this region is mainly of Na/K-bicarbonate type. PCA performed on complete data matrix yielded six significant PCs explaining 65% of the data variance. Although, PCA rendered considerable data reduction, it could not clearly group and distinguish the sample types (dug well, hand-pump and surface water). However, a visible differentiation between the water samples pertaining to two watersheds (Khar and Loni) was obtained. DA identified six discriminating variables between surface and groundwater and also between different types of samples (dug well, hand pump and surface water). Distinct grouping of the surface and groundwater samples was achieved using the PLS technique. It further showed that the groundwater samples are dominated by variables having origin both in natural and anthropogenic sources in the region, whereas, variables of industrial origin dominate the surface water samples. It also suggested that the groundwater sources are contaminated with various industrial contaminants in the region.