Structural, dielectric relaxation and piezoelectric characterization of Sr substituted modified PMS-PZT ceramic

Pyrochlore phase free [Pb_0.94Sr_0.06] [(Mn_1/3Sb_2/3)_0.05(Zr_0.53Ti_0.47)_0.95] O₃ ceramics has been synthesized with pure Perovskite phase by semi-wet route using the columbite precursor method. The field dependences of the dielectric response and the conductivity have been measured in a frequency range from 50 Hz to 1 MHz and in a temperature range from 303 K to 773 K. An analysis of the real and imaginary parts of the dielectric permittivity with frequency has been performed, assuming a distribution of relaxation times. The scaling behavior of the dielectric loss spectra suggests that the distribution of the relaxation times is temperature independent. The SEM photographs of the sintered specimens present the homogenous structures and well-grown grains with a sharp grain boundary. The material exhibits tetragonal structure. When measured at frequency (100 Hz), the polarization shows a strong field dependence. Different piezoelectric figures of merit (k_p, d₃₃ and Q_m) of the material have also been measured obtaining their values as 0.53, 271 pC/N and 1115, respectively, which are even higher than those of pure PZT with morphotropic phase boundary (MPB) composition. Thus the present ceramics have the optimal overall performance and are promising candidates for the various high power piezoelectric applications.     

UV-vis spectroscopic Investigation on γ-irradiated alkali aluminoborate glasses

This research paper reports about the change in optical spectra of alkali aluminoborate glasses under high dose of gamma irradiation. Effect of irradiation on visible spectra finds remarkable applications in optoelectronic materials.Glasses with a host matrix composed of M₂O (where M=Na, K)_, Al₂O_3, B2O3 were prepared by conventional melt quench technique. Gamma irradiation was performed at a dose-rate of 573 Gy/h to a total dose of 50 kGy. Samples were characterised before and immediately after irradiation by UV-vis transmission spectra in the range of 200-800 nm. The induced absorption coefficient and loss of transmission due to irradiation were attributed to the nature of alkali metals as well as the host matrix.     

Magnetization reversal in a preferred oriented (111) L1(0) FePt grown on a soft magnetic metallic glass for tilted magnetic recording

L1(0) FePt is an important material for the fabrication of high density perpendicular recording media, but the ultrahigh coercivity of L1(0) FePt restricts its use. Tilting of the magnetic easy axis and the introduction of a soft magnetic underlayer can solve this problem. However, high temperature processing and the requirement of epitaxial growth conditions for obtaining an L1(0) FePt phase are the main hurdles to be overcome. Here, we introduce a bilayered magnetic structure ((111) L1(0) FePt/glassy Fe(71)Nb(4)Hf(3)Y(2)B(20)/SiO(2)/Si) in which the magnetic easy axis of L1(0) FePt is tilted by ~36° from the film plane and epitaxial growth conditions are not required. The soft magnetic underlayer not only promotes the growth of L1(0) FePt with the preferred orientation but also provides an easy cost-effective micro/nanopatterning of recording bits. A detailed magnetic characterization of the bilayered structure in which the thickness of (111) L1(0) FePt with the soft magnetic Fe(71)Nb(4)Hf(3)Y(2)B(20) glassy underlayer varied from 5 to 60 nm is carried out in an effort to understand the magnetization switching mechanism. The magnetization switching behavior is almost the same for bilayered structures in which FePt layer thickness is >10 nm (greater than the domain wall thickness of FePt). For FePt film ~10 nm thick, magnetization reversal takes place in a very narrow field range. Magnetization reversal first takes place in the soft magnetic underlayer. On further increase in the reverse magnetic field, the domain wall in the soft magnetic layer compresses at the interface of the hard and soft layers. Once the domain wall energy becomes sufficiently large to overcome the nucleation energy of the domain wall in L1(0) FePt, the magnetization of the whole bilayer is reversed. This process takes place quickly because the domain walls in the hard layer do not need to move, and the formation of a narrower domain wall may not be favorable energetically. Our results showed that the present bilayered structure is very promising for the fabrication of tilted bit-patterned magnetic recording media.     

Reversal of Klein reflection by magnetic barriers in bilayer graphene

Massless Dirac fermions in monolayer graphene exhibit total transmission when normally incident on a scalar potential barrier, a consequence of the Klein paradox originally predicted by O Klein for relativistic electrons obeying the 3 + 1 dimensional Dirac equation. For bilayer graphene, charge carriers are massive Dirac fermions and, due to different chiralities, electron and hole states are not coupled to each other. Therefore, the wavefunction of an incident particle decays inside a barrier as for the non-relativistic Schr?dinger equation. This leads to exponentially small transmission upon normal incidence. We show that, in the presence of magnetic barriers, such massive Dirac fermions can have transmission even at normal incidence. The general consequences of this behavior for multilayer graphene consisting of massless and massive modes are mentioned. We also briefly discuss the effect of a bias voltage on such magnetotransport.     

Anomalous variation of the Lamb-M?ssbauer factor at the magnetic transition temperature in magnetoelectric?GaFeO(3)

Temperature-dependent (57)Fe M?ssbauer spectroscopy (5-723?K) and neutron diffraction (2-290?K) measurements are carried out on polycrystalline magnetoelectric GaFeO(3). From the neutron diffraction data, evidence for the magnetostriction and increased disorder at Fe sites close to the ferrimagnetic Curie transition temperature (T(C)) is observed. From the M?ssbauer data, it is observed that the Lamb-M?ssbauer factor as a function of temperature f(T), which is related to the integral over the first Brillouin zone of the phonon spectrum, shows a unequivocal variation at the T(C). The observations are discussed in terms of spin-phonon coupling. The observed average hyperfine fields from (57)Fe M?ssbauer spectra match with the bulk magnetization data. A critical exponent (β) of 0.38?±?0.02 and a Debye temperature (θ(D)) of ～350?K is estimated from the (57)Fe M?ssbauer data.     

Phase behavior, self-assembly, and emulsification of tween 80/water mixtures with limonene and perfluoromethyldecalin

The phase behavior, microstructure, and emulsification of polyoxyethylene (20) sorbitan monooleate (Tween 80), water, and d-limonene (LM) or perfluoromethyldecalin (PFMD) has been studied by small-angle X-ray scattering and polarizing optical microscopy. In the Tween 80/water binary system, a micellar solution (L(1)), a hexagonal (H(1)) phase, and a water-swellable isotropic surfactant liquid (L(2)) phase are successively formed at 25 °C. LM can be solubilized into all of the phases formed by Tween 80/water mixtures, whereas no solubilization of PFMD occurs. The L(2) phase was found by small-angle neutron scattering to be bicontinuous with low interfacial curvature. Added water swells and amplifies the pre-existing amphiphilic structure. The stability of oil-in-H(1) complex emulsions is found to be sensitive to changes in structure that accompany solubilization.     

Formation of polymeric toroidal-spiral particles

Compared to spherical matrices, particles with well-defined internal structure provide large surface to volume ratio and predictable release kinetics for the encapsulated payloads. We describe self-assembly of polymeric particles, whereby competitive kinetics of viscous sedimentation, diffusion, and cross-linking yield a controllable toroidal-spiral (T-S) structure. Precursor polymeric droplets are splashed through the surface of a less dense, miscible solution, after which viscous forces entrain the surrounding bulk solution into the sedimenting polymer drop to form T-S channels. The intricate structure forms because low interfacial tension between the two miscible solutions is dominated by viscous forces. The biocompatible polymer, poly(ethylene glycol) diacrylate (PEG-DA), is used to demonstrate the solidification of the T-S shapes at various configurational stages by UV-triggered cross-linking. The dimensions of the channels are controlled by Weber number during impact on the surface, and Reynolds number and viscosity ratio during subsequent sedimentation. We anticipate applications of the T-S particle in drug delivery, wherein diffusion through these T-S channels and the polymer matrix would offer parallel release pathways for molecules of different sizes. Polyphosphate, as a model macromolecule, is entrained in T-S particles during their formation. The in vitro release kinetics of polyphosphate from the T-S particles with various channel length and width is reported. In addition, self-assembly of T-S particles occurs in a single step under benign conditions for delicate macromolecules, and appears conducive to scaleup.     

Understanding the pH-dependent behavior of graphene oxide aqueous solutions: a comparative experimental and molecular dynamics simulation study

Understanding the pH-dependent behavior of graphene oxide (GO) aqueous solutions is important to the production of assembled GO or reduced GO films for electronic, optical, and biological applications. We have carried out a comparative experimental and molecular dynamics (MD) simulation study to uncover the mechanisms behind the aggregation and the surface activity of GO at different pH values. At low pH, the carboxyl groups are protonated such that the GO sheets become less hydrophilic and form aggregates. MD simulations further suggest that the aggregates exhibit a GO-water-GO sandwichlike structure and as a result are stable in water instead of precipitating. However, at high pH, the deprotonated carboxyl groups are very hydrophilic such that individual GO sheets prefer to dissolve in bulk water like a regular salt. The GO aggregates formed at low pH are found to be surface-active and do not exhibit characteristic features of surfactant micelles. Our findings suggest that GO does not behave like conventional surfactants in pH 1 and 14 aqueous solutions. The molecular-level understanding of the solution behavior of GO presented here can facilitate and improve the experimental techniques used to synthesize and sort large, uniform GO dispersions in a solution phase.     

Development and validation of an LC-MS/MS-ESI method for the determination of lorglumide, a CCK-1 antagonist in mouse plasma: application to a pharmacokinetic study

A highly sensitive, rapid assay method was developed and validated for the estimation of lorglumide in mouse plasma using liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in positive‐ion mode. The assay procedure involves extraction of lorglumide and phenacetin (internal standard, IS) from mouse plasma with simple protein precipitation. Chromatographic separation was achieved using an isocratic mobile (0.2% formic acid solution–acetonitrile, 20:80, v/v) at a flow‐rate of 0.5 mL/min on an Atlantis dC₁₈ column maintained at 40 °C with a total run time of 4.0 min. The MS/MS ion transitions monitored were 459.2 → 158.4 for lorglumide and 180.1 → 110.1 for IS. Method validation was performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 0.42 ng/mL and the linearity range extended from 0.42 to 500 ng/mL. The intra‐ and inter‐day precisions were in the ranges of 1.47–10.9 and 3.56–7.53, respectively. Copyright © 2011 John Wiley & Sons, Ltd.