Living Carbocationic Polymerization. VII. Living Polymerization of Isobutylene by Tertiary Alkyl (or Aryl) Methyl Ether/Boron Trichloride Complexes

Abstract

Colloidal palladium supported on a chelate resin containing iminodiacetic acid groups was prepared by refluxing the palladium chelate resin in methanol-water. Using the resin-supported colloidal palladium as a catalyst, cyclopentadiene was hydrogenated to cyclopentene in 97.1% selectivity at 100% conversion of cyclopentadiene under 1 atm of hydrogen in methanol at 30°C. Finely dispersed metal particles ranging from 10 to 60 Å in diameter were observed in the resin by electron microscopy. Both x-ray microanalysis for palladium and elution analysis of palladium ion with an aqueous solution of ethylenediaminetetraacetic acid disodium salt demonstrated the existence of large amounts of palladium ion complexes in the resin. The amount of palladium metal in the resin was estimated to be about 5% of the total palladium. Since the resin, after removal of most of the ionic palladium, exhibited almost the same catalytic activity as before, it was concluded that the finely dispersed metal particles are the active species in the catalyst.     

The Synthesis of Poly(Dimethylsiloxane-b-Isobutylene-b-Dimethylsiloxane) and Poly-(Dimethylsiloxane-b-Isobutylene-b-Dimethylsiloxane) from Alcohol-Telechelic Polyisobutylenes

The purpose of these studies was to combine polydimethylsiloxane (PDMS) and polyisobutylene (PIB) sequences into novel triblock, PDMS-b-PIB-b-PDMS, and multiblock, (-PDMS-b-PIB-b-PDMS-)n, copolymers. The key toward syntheses was the definition of conditions for the initiation of living anionic polymerization of hexamethyl-cyclotrisiloxane (D₃) at the CH₂OLi termini of well-defined tele-chelic PIB sequences. Subsequent deactivation of living D₃ polymerization charges with Me₃ SiCl yielded the target triblock whereas stoichiometric amounts of Me₂ SiCl₂ gave the multiblock copolymer.     

An ab initio theoretical study of electronic structure and properties of 2'-deoxyguanosine in gas phase and aqueous media

Molecular geometries of two structural forms of 2'-deoxyguanosine (keto-N9R and keto-N7R, R = the sugar moiety) considering both the C2'-endo and C3'-endo conformations of the sugar ring and those of the complexes of these species with two water molecules each were optimized employing the ab initio RHF procedure. A mixed basis set consisting of the 6-311+G* basis set for the nitrogen atom of the amino group and the 4-31G basis set for all the other atoms was used. The RHF calculations were followed by correlation correction of the total energy at the MP2 level. Both the structural forms of 2'-deoxyguanosine were solvated using the polarized continuum model (PCM) of the self-consistent reaction field (SCRF) theory and the corresponding RHF optimized geometries at the RHF and MP2 levels. Geometry optimization was also performed in aqueous media using the Onsager model at the RHF level using the above-mentioned mixed basis set, and subsequently, using the reoptimized geometries, single-point MP2 calculations were performed. It is found that both the keto-N9R and keto-N7R forms of 2'-deoxyguanosine as well as their complexes with two water molecules each would occur, particularly at the water-air interface. Though the normal Watson-Crick-type base pairing would not be possible with the keto-N7R form of 2'-deoxyguanosine(G*), two other (G*-C and G*-T) base pairing schemes may occur with this form of the nucleoside, which may cause mutation. The present calculated geometry of the keto-N9R form of the anti-conformation of 2'-deoxyguanosine including the dihedral angle chi(CN) agree satisfactorily with the available crystallographic results. The present results also agree satisfactorily with those obtained by other authors earlier for the keto-N9R form of 2'-deoxyguanosine using B3LYP and MP2 methods employing the 6-31G* basis set. Using transition state calculations, it is shown that tautomerism of guanine and other similar molecules where the tautomers would coexist would be facilitated by the occurrence of the H(+) and OH(-) fragments of water molecules. Further, this coexistence of the two tautomers appears to make the C8 carbon atom located between the N7 and N9 nitrogen atoms susceptible to attack by the OH(-) group. Thus, an explanation is obtained for the efficient formation of the reaction product 8-hydroxy-2'-deoxyguanosine, which serves as a biomarker for oxidative damage to DNA in biological systems.     

Static and Kinetic Studies on the Adsorption Behavior of Sulfadiazene

To investigate the nature of interactive forces between sulfadiazene molecules and alumina surface the experiments were performed for the adsorption of sulfadiazene (SD) from its aqueous sulution onto the alumina surfaces at 25 ± 0.2°C and the influence of factors such as increasing concentration of SD (4.0–20.0 × 10^–3 mol cm^–3), the time required for adsorption equilibrium, pH (2.0–12.0) and temperature (5–45°C) of the adsorption medium, the presence of ions like Cl^–, SO^2– ₄ and PO^3– ₄ (0.01–0.30 M) and organic solvents (5% v/v) were observed on the course of adsorption of SD. Various adsorption and kinetic parameters such as adsorption coefficient, the rate constants for adsorption and desorption were also evaluated. The results of the above cited studies facilitated to formulate the mechanisms of interaction between SD and alumina surfaces. From application view point the present work may be a potential tool for an effective chromatographic separation of sulfa drugs from industrial effluents.     

Microhardness measurements of poly(methyl methacrylate) and poly(vinylidene fluoride) polyblends

The preparation of polymer blends of poly(methyl methacrylate) and poly(vinylidene fluoride) in different weight percentages is described. Vickers microhardness measurements have been made to study the effects of load and compositional ratio of the two polymers in polyblend. It is observed that poly(vinylidene fluoride) acts as a plasticizer for poly(methyl methacrylate). Evidence of increasing and decreasing strength of polyblends has been obtained for different compositional ratios of the two polymers.     

Extraction-spectrophotometric determination of uranium(VI) with PAR and N-octylacetamide

A new and simple method for selective spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol (PAR) and N-octylacetamide into benzene over pH 7.0–9.0 is described. The molar absorptivity of the complex with 9 different amides is in the range of (0.40–3.2)·10⁴ 1·mol^–1·cm^–1 at the absorption maximum. Out of these, the most sensitive compound N-octylacetamide (OAA) was chosen for detailed studies in the present investigation. The detection limit of the method is 0.008 g U·ml^–1. The system obeys Beer's law in the range of 0–5 g U·ml^–1. The method is free from interferences of most of the common metal ions except vanadium(V) and copper(II), which are masked by proper masking agents. The composition of the complex is determined by curve-fitting method. The method has been applied for the recovery of the metal from rock samples and synthetic mixtures.     

Zinc silicate-bonded diethyldithiocarbamate — a selective adsorbent for separating transition metal ions and preconcentration of palladium(II)

Summary A new chelating adsorbent, zinc silicate-bonded diethyldithiocarbamate (DTC) has been prepared for the separation and preconcentration of some transition metal ions. The distribution coefficients (Kd values) of 15 metal ions have been estimated in solution at various pH's and some quantitative separations have been achieved. The high selectivity for Pd(II) has been utilized for its preconcentration from dilute aqueous solutions; quantitative elution is effected with acidic 4% thiourea solution.     

高效固体酸SBA-15-Zr(OTf)3催化胺或醇开环环氧化合物

通过简单的一锅两步法制备了三氟金属(铝,钛,锆)接枝介孔SBA-15 (AlTf/S,TiTf/S,ZrTf/S)固体酸材料,并通过XRD,N2吸附,TGA,FTIR,原位吡啶FTIR和元素分析对这些材料进行了详细的表征.其中,ZrTf/S能够高效催化环氧化物温和条件下被胺或醇开环生成对应β-氨基醇或β-烷氧基醇,并且催化剂能循环利用.ZrTf/S相较于AlTf/S和TiTf/S酸性最强,因而催化活性也最高.     

Catalytic action of Mn‐superoxide dismutase in scavenging superoxide radical anion by double hydrogen abstraction from dihydrolipoic acid: A theoretical study

The mechanism of scavenging superoxide radical anion ( ) by dihydrolipoic acid (diLA) in absence and presence of the enzyme Manganese‐superoxide dismutase (Mn‐SOD) has been investigated using density functional theory. Mn‐SOD was modelled by a complex of a manganese cation (Mn²⁺) bonded to three similar molecules having a histidine ring each and a water molecule. It has been shown that the scavenging mechanism involves double hydrogen abstraction by from different pairs of neighboring sites of diLA. It has been found that diLA alone cannot scavenge superoxide radical anions efficiently as the barrier energies involved in the reactions are very high. However, in presence of Mn‐SOD, owing to its catalytic action, the corresponding reactions become barrierless due to which superoxide radical anions would be scavenged highly efficiently. H₂O₂ formed from superoxide radical anion due to double hydrogen abstraction from diLA is scavenged by diLA alone barrierlessly without involving Mn‐SOD or any other catalyst.     

Hot atom chemistry in oxyanion targets,part II1: Recoil behaviour of56Mn in permanganates

Fractional precipitation techniques have been utilized to separate the lower valent and parent forms of⁵⁶Mn in permanganate targets and an attempt is made to study a few aspects of chemical stabilization of recoil⁵⁶Mn in permanganates. Ammonium permanganate, recoil behaviour of which has not been studied previously, is chosen as one of the targets along with the potassium permanganate for initial retention and also for isothermal annealing.⁵⁶Mn initial retentions of about 12% and about 4% are obtained for potassium and ammonium permanganate, respectively, by activation from a Ra–Be neutron source. A usual trend for KMnO₄ and the reduction of recoil fragments by ammonium ions in NH₄MnO₄ are seen through the isothermal annealing study.