Antioxidant and Protective Effects of <Emphasis Type="Italic">Schinus terebinthifolius</Emphasis> Raddi Against Doxorubicin-Induced Toxicity

Doxorubicin is an anticancer drug whose toxic effects on non-cancer cells are associated with increased oxidative stress. This study investigated the chemical composition, antioxidant activity of the methanolic extract of Schinus terebinthifolius Raddi leaves (MESL) as well as effects against doxorubicin-induced toxicity in human erythrocytes, K562 human erythroleukemia cells, and mouse hearts. The chemical composition indicated the presence of phenolic compounds, flavonoids, tannins, and ascorbic acid. MESL showed antioxidant activity by scavenging free radicals and inhibiting hemolysis and lipid peroxidation in human erythrocytes incubated with an oxidizing agent, and was able to increase the enzymatic activity of superoxide dismutase and glutathione peroxidase in human erythrocytes, without influencing the activity of enzyme catalase. The increase of oxidative hemolysis and malondialdehyde levels in erythrocytes incubated with doxorubicin was reduced by treatment with MESL. The cytotoxic activity of doxorubicin in erythroleukemia cells treated with MESL was unmodified. Additionally, the extract protected mice against the doxorubicin-induced cardiotoxicity. In conclusion, the MESL exhibits antioxidant activity, reducing doxorubicin-induced oxidative stress without changing the anticancer action of the drug, and protects against doxorubicin-induced cardiotoxicity. Hence, these findings suggest that these effects are via anti-oxidative by inhibiting free radicals, decreased oxidative stress, and increased antioxidant enzyme activity.     

Direct mass measurements of the neutron-rich isotopes of chlorine through iron

Direct mass measurements of up to 6 isotopes for each of the elements chlorine through iron (over 35 masses) have been performed using the Time-of-Flight Isochronous (TOFI) spectrometer. We have used these measurements to: (1) investigate the local dependence of neutron and proton pairing energies on neutron excess, (2) find a new region of enhanced binding centered around⁵³Sc, and (3) evaluate the predictive capabilities of several mass models.     

Adsorption of Cu(II) on porous chitosan membranes functionalized with histidine

The ability of chitosan to form complexes with bivalent metal ions has been broadly explored in the literature. The present work investigates the influence of functionalization of macroporous chitosan membranes with histidine on their ability to remove copper ions from aqueous solution in the range of pH 4–6. The maximum adsorption capacity for Cu(II) ion was 2.5 mmol metal/g pristine chitosan membranes. Under this condition, no influence of membrane porosity was observed. However, for membranes with immobilized histidine, the porosity was shown to be a factor that affects the maximum adsorption capacity, with values ranging from 2.0 to 3.0 mmol metal/g chitosan. These results indicate that the immobilization of histidine on porous chitosan membranes presents synergy with porosity in the ability to complex Cu(II) ions. This synergy may be negative or positive, depending on the initial membrane porosity.     

Short chain acyclic crown ethers

A series of short chain acyclic crown ethers such as (1,2), (1,3), (1,4)-phenylenediethers and some symmetric or assymmetrico-substituted phenyl ethers were prepared. The complexation studies of these compounds were carried out by a) direct UV titration method, b) picrate extraction method and c) isolation of crystalline complex.Taken in part from the master's thesis ofMaria Cecilia Bastos Vieira de Souza, Instituto Militar de Engenharia, 1978.     

Luminescence lifetime distributions analysis in heterogeneous systems by the use of Excel's Solver

A detailed study of the luminescence decay curves of pyrene included within p-tert-butylcalix[4]arene cavities and benzophenone into silicalite channels is reported. A new methodology for a lifetime distribution analysis of the decay curve of probes onto heterogeneous surfaces is presented, which allows for asymmetric distributions and uses Voigt profiles (Gaussian and Lorentzian mixture) instead of pure Gaussian or Lorentzian distributions. Our approach uses a very simple and widely available tool for fitting, the Microsoft Excel Solver. In the case of the pyrene/tert-butylcalix[4]arene sample, the room temperature luminescence detected in the microsecond time scale was not only the phosphorescence of pyrene but also monomer delayed fluorescence, crystal phosphorescence, and excimer delayed fluorescence. In the benzophenone/silicalite case, three emissive forms of benzophenone could be assigned, one of benzophenone included into the silicalite circular zigzag channels, another for emplacement into the elliptical straight channels and finally when benzophenone is placed at the crossing points of those silicalite channels, where smaller spatial restrictions for benzophenone exist.     

Determination of As, Ge, Hg, Pb, Sb, Se and Sn in coal slurries by CVG-ETV-ICP-MS using external or isotopic dilution calibration

A method for the multi-elemental determination of As, Ge, Hg, Pb, Sb, Se and Sn in coal reference materials by slurry sampling chemical vapor generation (CVG) using external calibration and isotopic dilution (ID) calibration and detection by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) is proposed. As, Ge, Sb, Se and Sn were determined using the external calibration, while, Hg, Pb, Se and Sn were determined by isotopic dilution. About 50–250 mg of sample was mixed with an acid solution, containing aqua regia and HCl, in an ultrasonic bath. For the isotopic dilution calibration, the enriched isotopes ²⁰¹Hg, ²⁰⁶Pb, ⁷⁷Se and ¹¹⁹Sn were added to the slurry in an adequate amount in order to produce an altered isotopic ratio close to 1. The vapor produced by the reaction of the sample slurry with the reducing agent was transported to the vaporizer and trapped in a Ir-treated graphite tube at 200 °C, before vaporization at 2100 °C and transportation of the vapor to the plasma. The accuracy of the method was assured by the analysis of four certified reference coal samples, using external calibration with aqueous solutions, prepared in the same medium and subjected to the same CVG and trapping procedure as the slurries and also by isotopic dilution calibration. The obtained concentrations were in agreement with the certified values, using the t-Student test for a confidence level of 95%. The detection limits (3 s; n = 5) of isotopic dilution, in ng g^− 1, were: 0.4 for Hg, 900 for Pb, 0.3 for Se and 0.2 for Sn. For external calibration, the detection limits, in ng g^− 1, were: 1.6 for As, 0.1 for Ge, 0.3 for Sb, 0.9 for Se and 7.5 for Sn. The relative standard deviations generally were lower than 14%, adequate for slurry analysis.     

Determination of mercury in biological samples by cold vapor atomic absorption spectrometry following cloud point extraction with salt-induced phase separation

Method development for the pre-concentration of mercury in human hair, dogfish liver and dogfish muscle samples using cloud-point extraction and cold vapor atomic absorption spectrometry is demonstrated. Before the extraction, the samples were submitted to microwave-assisted digestion in a mixture of H₂O₂ and HNO₃. Cloud point extraction was carried out using 0.5% (m/v) ammonium O,O-diethyldithiophosphate (DDTP) as the chelating agent and 0.3% (m/v) Triton X-114 as the non-ionic surfactant. Phase separation was induced after the addition of Na₂SO₄ to a final concentration of 0.2 mol L⁻¹. Aliquots of the final extract were transferred to PTFE tubes and NaBH₄ and HCl were added. The mercury vapor was driven to a non-heated quartz tube for measuring the absorbance. The results obtained with salt-induced phase separation were in good agreement with the certified values at a 95% confidence level. An enrichment factor of 10 allowed a detection limit of 0.4 ng g⁻¹ to be obtained, which demonstrates the high sensitivity of the proposed procedure for the determination of mercury at trace levels.     

Determination of simple bromophenols in marine fishes by reverse-phase high performance liquid chromatography (RP-HPLC)

Brominated phenols 2- and 4-bromophenol (2-BP and 4-BP); 2,4- and 2,6-dibromophenol (2,4-DBP and 2,6-DBP) and 2,4,6-tribromophenol (2,4,6-TBP) have been identified as key flavor compounds found in seafoods. Depending on their concentrations, they were responsible for marine or ocean flavor (shrimp/crab/fish/sea salt-like) or for phenolic/iodine/iodoform-like off-flavor. In this work a new analytical methodology was developed to determine, simultaneously, such bromophenols in fish meats, based on reversed-phased high-performance liquid chromatographic separation (RP-HPLC). The separation of bromophenols was made onto a Lichrospher 100 RP-18 column using water:acetonitrile gradient at a flow rate of 1.0 mL min⁻¹, using absorbance detection at 286 nm, were the 2-BP, 4-BP, 2,4- and 2,6-DBP show significant absorbtivity values and at 297 nm for 2,4,6-TBP. They were separated in 20 min with a good chromatographic resolution (Rs) for the isomeric compounds: 2- and 4-BP, Rs = 1.23; 2,4- and 2,6-DBP, Rs = 1.63. The calibration curves were linear in the bromophenols concentration range of 200.0-1000 ng mL⁻¹. Under optimized conditions, the detection limit of the HPLC method was 127 ng mL⁻¹ for 2-BP; 179 ng mL⁻¹ for 4-BP; 89.0 ng mL⁻¹ for 2,4-DBP; 269 ng mL⁻¹ for 2,6-DBP and 232 ng mL⁻¹ for 2,4,6-TBP. This method has been applied in determination of bromophenols, isolated by combined steam distillation-solvent extraction with 2 mL of pentane/diethyl ether (6:4), from Brazilian fishes samples, collected on the Atlantic coast of Bahia (13°01′S and 38°31′W), Brazil. The concentration range determined were 0.20 ng g⁻¹ (2-BP) to 299 ng g⁻¹ (2,4,6-TBP). The method proposed here is rapid and suitable for simultaneous quantification of simple bromophenols in fish meat. As long as we know, it is the first analytical methodology, using RP-HPLC/UV, which was developed to determine simple bromophenols in fish meat.     

Experimental thermochemical study of two polymethylpyrazine N,N′-dioxide derivatives

The standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline 2,3,5-trimethylpyrazine-1,4-dioxide and 2,3,5,6-tetramethylpyrazine-1,4-dioxide were measured, at T = 298.15 K, by static bomb calorimetry and the standard molar enthalpies of sublimation, at T = 298.15 K, were obtained from Calvet microcalorimetric measurements. These values were used to derive the respective standard molar enthalpies of formation in gaseous phase. The mean N–O bond dissociation enthalpy has been calculated for both compounds.