Evaluation of a glycerol derived biofuel by thermal analysis

This work describes thermal analysis evaluation of a glycerol derived compound (fatty acid esters of (2,2-dimethyl-1,3-dioxolan-4-yl) methanol) developed to work as a biofuel. Mixtures of these ketal–glyceryl esters with fatty acid methyl esters typical of soybean biodiesel were prepared and evaluated in relation to biodiesel critical thermal properties such as temperature of crystallization, thermal stability and volatilization measured by differential scanning calorimetry and thermogravimetric analysis. The volatility of the products containing fatty acid methyl esters and (2,2-dimethyl-1,3-dioxolan-4-yl) methyl esters could be predicted by thermogravimetric analyses conducted in nitrogen that avoided time consuming distillation and greatly reduced material expenditure.     

Metal oxidation states in biological water splitting

A central question in biological water splitting concerns the oxidation states of the manganese ions that comprise the oxygen-evolving complex of photosystem II. Understanding the nature and order of oxidation events that occur during the catalytic cycle of five S_i states (i = 0–4) is of fundamental importance both for the natural system and for artificial water oxidation catalysts. Despite the widespread adoption of the so-called “high-valent scheme”—where, for example, the Mn oxidation states in the S₂ state are assigned as III, IV, IV, IV—the competing “low-valent scheme” that differs by a total of two metal unpaired electrons (i.e. III, III, III, IV in the S₂ state) is favored by several recent studies for the biological catalyst. The question of the correct oxidation state assignment is addressed here by a detailed computational comparison of the two schemes using a common structural platform and theoretical approach. Models based on crystallographic constraints were constructed for all conceivable oxidation state assignments in the four (semi)stable S states of the oxygen evolving complex, sampling various protonation levels and patterns to ensure comprehensive coverage. The models are evaluated with respect to their geometric, energetic, electronic, and spectroscopic properties against available experimental EXAFS, XFEL-XRD, EPR, ENDOR and Mn K pre-edge XANES data. New 2.5 K ⁵⁵Mn ENDOR data of the S₂ state are also reported. Our results conclusively show that the entire S state phenomenology can only be accommodated within the high-valent scheme by adopting a single motif and protonation pattern that progresses smoothly from S₀ (III, III, III, IV) to S₃ (IV, IV, IV, IV), satisfying all experimental constraints and reproducing all observables. By contrast, it was impossible to construct a consistent cycle based on the low-valent scheme for all S states. Instead, the low-valent models developed here may provide new insight into the over-reduced S states and the states involved in the assembly of the catalytically active water oxidizing cluster.     

Evaluation of As,Se and Zn in octopus samples in different points of sales of the distribution chain in Brazil

Three CRMs of different matrix composition were analysed, representing an environmental matrix sample (BCR–320R Channel Sediment), a botanical matrix sample (SRM 1547 Peach Leaves) and a zoological matrix sample (SRM 1566b Oyster Tissue). The element mass fractions were obtained using the KayWin program. Analytical measurement uncertainty was determined by two approaches: (1) the routine procedure applying combination of the overall uncertainty u(m) = 3.5 % and statistical uncertainty of the peak area determination and (2) the procedure applying the dedicated ERON program for calculating uncertainty. Performance of altogether 31 certified values was tested by means of calculating E _n numbers. For the remaining 52 non-certified values, comparison between uncertainties obtained by the two approaches was made. When using the first approach, the E _n number showed satisfactory performance in 28 cases; by using the second approach, the E _n number showed satisfactory performance in 27 cases. None of the unsatisfactory performances (E _n  > 1) appeared to be of systematic nature. The uncertainties obtained by applying the two approaches revealed a big extent of consistency. As the present nuclear database lacks lot of data that serve as input to the ERON program, in particular uncertainties of Q ₀ factors, estimates need to be introduced for the missing values, emphasising the urgent need to upgrade the database with missing data.     

New synthetic methods for 2,3-diarylacridin-9(10H)-one and (E)-2-aryl-4-styrylfuro[3,2-c]quinoline derivatives

Two new synthetic methodologies for 2,3-diarylacridin-9(10H)-ones were developed. The first one involves the Heck reaction of (E)-3-iodo-2-styrylquinolin-4(1H)-ones with styrenes, leading to (E,E)-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize in two different ways. Electrocyclization and further in situ oxidation leads to 2,3-diarylacridin-9(10H)-ones, while tautomerization, cyclization by nucleophilic addition and further in situ oxidation produces (E)-2-aryl-4-styrylfuro[3,2-c]quinolines as the main compound. The second method gives only 2,3-diaryl-10-methylacridin-9(10H)-ones and involves the Heck reaction of (E)-3-iodo-1-methyl-2-styrylquinolin-4(1H)-ones and styrenes, leading to (E,E)-1-methyl-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize through electrocyclization and oxidation processes affording the expected compounds. The structures of all new compounds were established by extensive NMR studies.     

Evaluation of cellulase preparations for hydrolysis of hardwood substrates

Seven cellulase preparations from Penicillium and Trichoderma spp. were evaluated for their ability to hydrolyze the cellulose fraction of hardwoods (yellow poplar and red maple) pretreated by organosolv extraction, as well as model cellulosic substrates such as filter paper. There was no significant correlation among hydrolytic performance on pretreated hardwood, based on glucose release, and filter paper activity. However, performance on pretreated hardwood showed significant correlations to the levels of endogenous β-glucosidase and xylanase activities in the cellulase preparation. Accordingly, differences in performance were reduced or eliminated following supplementation with a crude β-glucosidase preparation containing both activities. These results complement a previous investigation using softwoods pretreated by either organosolv extraction or steam explosion. Cellulase preparations that performed best on hardwood also showed superior performance on the softwood substrates.     

Microengineered PEG Hydrogels: 3D Scaffolds for Guided Cell Growth

Designing three‐dimensional (3D) scaffolds for selective manipulation of cell growth is of high relevance for applications in regenerative medicine. Especially, scaffolds with oriented morphologies bear high potential to guide the restoration of specific tissues. The fabrication of hydrogel scaffolds that support long‐term survival, proliferation, and unidirectional growth of embedded cells is presented here. Parallel channel structures are introduced into the bulk hydrogels by uniaxial freezing, providing stable, and uniform porosity suitable for cell invasion (pore diameters of 5–15 µm). In vitro assessment of the scaffolds with murine fibroblasts (NIH L929) shows a remarkable unidirectional movement along the channels, with the cells traveling several millimeters through the hydrogel.

     

Response surface optimisation applied to a headspace-solid phase microextraction-gas chromatography-mass spectrometry method for the analysis of volatile organic compounds in water matrices

A new method for the simultaneous determination of 12 volatile organic compounds (trans-1,2-dichloroethene, 1,1,1-trichloroethane, benzene, 1,2-dichloroethane, trichloroethene, toluene, 1,1,2-trichloroethane, tetrachloroethene, ethylbenzene, m-, p-, o-xylene) in water samples by headspace solid phase microextraction (HS–SPME)–gas chromatography mass spectrometry (GC–MS) was described, using a 100?µm PDMS (polydimethylsiloxane) coated fibre. The response surface methodology was used to optimise the effect of the extraction time and temperature, as well as the influence of the salt addition in the extraction process. Optimal conditions were extraction time and temperature of 30?min and ?20°C, respectively, and NaCl concentration of 4?mol?L^?1. The detection limits were in the range of 1.1?×?10^?3–2.3?µg?L^?1 for the 12 volatile organic compounds (VOCs). Global uncertainties were in the range of 4–68%, when concentrations decrease from 250?µg?L^?1 down to the limits of quantification. The method proved adequate to detect VOCs in six river samples.     

Structural studies of cyclic ureas: 3. Enthalpy of formation of barbital

A thermochemical and thermophysical study has been carried out for crystalline barbital [5,5′-diethylbarbituric acid]. The thermochemical study was made by static bomb combustion calorimetry, from which the standard () molar enthalpy of formation of the crystalline barbital, at T = 298.15 K, was derived as −(753.0 ± 1.8) kJ · mol⁻¹. The thermophysical study was made by differential scanning calorimetry over the temperature interval (265 to 470) K. A solid–solid phase transition was found at T = 413.3 K. The vapour pressures of the crystalline barbital were measured at several temperatures between T = (355 and 377) K, by the Knudsen mass-loss effusion technique, from which the standard molar enthalpy of sublimation, at T = 298.15 K was derived as (117.3 ± 0.6) kJ · mol⁻¹. The combination of the experimental results yielded the standard molar enthalpy of formation of barbital in the gaseous phase, at T = 298.15 K, as −(635.8 ± 1.9) kJ · mol⁻¹. This value is compared and discussed with our theoretical calculations by several methods (Gaussian-n theories G2 and G3, complete basis set CBS-QB3, density functional B3P86 and B3LYP) by means of atomization and isodesmic reaction schemes.     

Ester-additives as inhibitors of the gelification of soybean oil methyl esters in biodiesel

Biodiesel from soybean oil transesterified with methanol (TSO) becomes viscous and gelifies at low storage temperatures which makes it difficult to pump. To inhibit this behaviour bulky esters were added to reduce the crystallization temperature of TSO and to modify the rate of conversion of crystallized mass. This rate was found to follow a JMAK kinetic model. The Avrami’s parameter n was constant for TSO, while two n values were found for TSO-additive solutions, meaning that the additives first slowed down the rate of nucleation and, later on as enough nuclei had been formed, crystal growth rate dominated and the previous crystallization rate was recovered.