Significance of the HO2 + CO reaction during the combustion of CO + H2 mixtures at high pressures

This paper constitutes an experimental and numerical study, using uncertainty analysis of the most important parameters, to evaluate the mechanism for the combustion of CO + H₂ mixtures at high pressures in the range 15-50 bar and temperatures from 950 to 1100 K. Experiments were performed in a rapid compression machine. Autoignition delays were measured for stoichiometric compositions of CO + H₂ containing between 0 and 80% CO in the total fuel mixture. The experimental results showed an unequivocal monotonic increase as the proportion of CO in the mixture was raised. Comparisons were made also with the measured ignition delays in mixtures of H₂ with increasing dilution by N₂, corresponding to the proportions of CO present. These times also increased monotonically, albeit with a greater sensitivity to the extent of dilution than those measured in the CO + H₂ mixtures. By contrast, numerical simulations for the same mixtures, based on a kinetic model derived by Davis et al. displayed a qualitative discrepancy as there was virtually no sensitivity of the ignition delay to the changing ratio of CO + H₂, certainly up to 80% replacement. No exceptions to this trend were found, despite tests being made using seven other kinetic models for CO + H₂ combustion. Global uncertainty analyses were then applied to the Davis et al. model in order to trace the origins of this discrepancy. The analyses took into account the uncertainties in all rate parameters in the model, which is a pre-requisite for evaluation against ignition delay data. It is shown that the reaction rate constant recommended by Baulch et al. for the HO₂ + CO reaction, at T ∼ 1000 K, could be up to a factor of 10 too high and that lowering this rate corrected the qualitative anomaly between experiment and numerical prediction.     

High internal phase CO2-in-water emulsions stabilized with a branched nonionic hydrocarbon surfactant

A nonionic-methylated branched hydrocarbon surfactant, octa(ethylene glycol) 2,6,8-trimethyl-4-nonyl ether (5b-C12E8) emulsifies up to 90% CO2 in water with polyhedral cells smaller than 10 microm, as characterized by optical microscopy. The stability of these concentrated CO2/water (C/W) emulsions increases with pressure and in some cases exceeds 24 h. An increase in pressure weakens the attractive van der Waals interactions between the CO2 cells across water and raises the disjoining pressure. It also enhances the solution of the surfactant tail and drives the surfactant from water towards the water-CO2 interface, as characterized by the change in emulsion phase behavior and the decrease in interfacial tension (gamma) to 2.1 mN/m. As the surfactant adsorption increases, the greater tendency for ion adsorption is likely to increase the electrostatic repulsion in the thin lamellae and raise the disjoining pressure. As pressure increases, the increase in disjoining pressure and decrease in the capillary pressure (due to the decrease in gamma) each favor greater stability of the lamellae against rupture. The electrical conductivity is predicted successfully as a function of Bruggeman's model for concentrated emulsions. Significant differences in the stability are observed for concentrated C/W emulsions at elevated pressure versus air/W or C/W foams at atmospheric pressure.     

Synthesis of temperature responsive polymer brushes from polystyrene latex particles functionalized with ATRP initiator

Thermally responsive poly(N-isopropylacrylamide) (PNIPAAM) brushes were grafted from polystyrene particles synthesized with surfactant free emulsion polymerization and functionalized with a thin shell of ATRP initiator on the surface. The ATRP initiator was present in the shell either alone or along with copolymerized styrene and also a crosslinker. The grafted brushes were characterized with transmission electron microscopy before and after negative staining with uranyl acetate. Cryo-scanning electron microscopy confirmed the growth of extremely long PNIPAAM layers from the surface, which otherwise looked shrunken in the transmission electron microscope owing to dehydration and possibly the effect of staining agent. The amount of grafted polymer also increases proportionally to the increase of the monomer concentration in the initial reaction system. The change in character from hydrophilic to hydrophobic with temperature and salt was found to be reversible and fast. The adsorption of protein complexes (tobacco mosaic virus) could be readily achieved at higher temperatures indicating the potential of the grafted particles to be used as stationary phases in temperature regulated chromatographic separations.     

Inelastic neutron scattering and lattice dynamics studies in complex solids

At Trombay, lattice dynamics studies employing coherent inelastic neutron scattering (INS) experiments have been carried out at the two research reactors, CIRUS and Dhruva. While the early work at CIRUS involved many elemental solids and ionic molecular solids, recent experiments at Dhruva have focussed on certain superconductors (cuprates and intermetallics), geophysically important minerals (Al₂SiO₅, ZrSiO₄, MnCO₃) and layered halides (BaFCl, ZnCl₂). In most of the studies, theoretical modelling of lattice dynamics has played a significant role in the interpretation and analysis of the results from experiments. This talk summarises the developments and current activities in the field of inelastic neutron scattering and lattice dynamics at Trombay.     

ON THE NATURE OF CHLOROPHYLL a IN AQUEOUS MICELLAR SYSTEMS

Abstract— Absorption and fluorescence spectra of chlorophyll a in aqueous micellar solutions were studied. Solutions in anionic micelles gave an absorption band at 740 nm, attributable to microcrystal- line chlorophyll a. Solutions in cationic and nonionic micelles do not show this band. The positions of the spectral bands in anionic micelles and the possible structure of microcrystalline form are discussed. A comparison is made of the behaviour of microcrystalline form in hydrocarbon solvents and in micellar solutions.     

Laminar unsteady magnetohydrodynamic flow in an annular channel under a radial magnetic field

Summary The paper discusses the unsteady flow of an electrically conducting viscous fluid in the region between two coaxial cylinders in the presence of a radial magnetic field emanating from the common axis in planes perpendicular to it. In the special case when the magnetic Reynolds number of the flow is the same as its Reynolds number, an exact solution in terms of Bessel functions has been obtained which after infinite time tends to the steady flow discussed by Globe.     

Thermodynamics of Swelling of Poly(NIPAM-co-NTBA-co-HEAAm) Hydrogels

In the present study, poly(N-Isopropylacrylacrylamide-co-N-tertiarybutylacrylamide-co-hydroxyethylcrylamide) (NIPAM-co-NTBA-co-HEAAm) hydrogels are prepared with variation of molar ratio of hydrophilic HEAAm and hydrophobic NTBA. The prepared hydrogels are characterized with elemental analysis and Fourier transform infrared (FTIR) spectroscopy. The thermodynamics of swelling properties of poly(NIPAM-co-NTBA-co-HEAAm) hydrogels have also been discussed. The experimental C/N ratios are comparable with the theoretical value. The enthalpy change of mixing ∆H_mix, entropy change of mixing ∆S_mix, free energy change of mixing ∆G_mix are determined for swelling of hydrogels at 25 °C. The value of total free energy of hydrogel swelling is found to be negative which confirms the lower critical solution temperature (LCST) exhibited in all hydrogels and the volume change transition shows the thermoresponsive behavior. The values of ∆S_mix increase and ∆G_mix decrease with increasing amount of hydrophobic NTBA content in the hydrogels. The values of free energy change of elasticity (∆G_el) are found to be increased with increasing the hydrophobic NTBA content followed by decrease in swelling percentage. Also, the transition temperature of the hydrogel is found to be decreased with increasing the hydrophobic NTBA.     

Thermo-Kinetic Study of Piperazine Immobilized Silica Surface

In the present study, the degradation process of piperazine (PP) immobilized silica gel (SiPP) is investigated under dynamic conditions. The degradation of SiPP is studied with thermogravimetric analyzer (TGA). The kinetics of degradation process is analyzed by Kissinger method, Flynn–Wall–Ozawa's (FWO) method, and Deconvolution method. It is found that degradation of SiPP can be described by parallel independent two-portion process model, which includes two processing state of the system (marked by processes 1 and 2), where process 1 and 2 can be attributed to decomposition processes of organic moiety attached on silica surface. The apparent activation energy (E_a) is calculated by Flynn–Wall–Ozawa's (FWO) method and deconvolution method.