Inversion Properties of n-Alkane Phosphonic Acids Stabilized Emulsions: HLB Dependence

The emulsifier properties of n-alkane phosphonic acids (C10H21PO3H2; C12H25PO3H2 and C13H27PO3H2) and their mono- and di-sodic salts were studied, with emphasis on the morphological and dynamical inversion properties as a function of their neutralization degree. Maximum stabilization properties were appreciated for C10PO3H2 and C12PO3H2 while not for C13PO3H2. Such fact is associated to their odd number of carbon atoms chain, which is the origin of the intrachain constraints on the tail-chain flexibility.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

Synthesis and characterization of graphene‐containing thermoresponsive nanocomposite hydrogels of poly(N‐vinylcaprolactam) prepared by frontal polymerization

Thermoresponsive poly(N‐vinylcaprolactam) nanocomposite hydrogels containing graphene were successfully prepared by frontal polymerization. High concentration of graphene (5.0 mg/mL) was obtained by direct graphite sonication in the self‐same liquid monomer, thus avoiding any chemical manipulation and obtaining “real” graphene as nanofiller instead of one of its more or less oxidized derivative, which is what generally reported in published reports. Furthermore, the corresponding nanocomposites were obtained without using any solvent to be eventually removed. The materials were fully characterized by RAMAN, SEM, and TEM, and their swelling behavior and rheological properties were investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Characterization of pigments and ligands in a wall painting fragment from Liternum archaeological park (Italy)

Spectroscopic and MS techniques were used to characterize the pigments and the composition of polar and nonpolar binders of a stray wall painting fragment from Liternum (Italy) archaeological excavation. X‐ray fluorescence and diffraction analysis of the decorations indicated mainly the presence of calcite, quartz, hematite, cinnabar, and cuprorivaite. Infrared spectroscopy, GC coupled to flame‐ionization detector, and MS analysis of the polar and nonpolar components extracted from paint layers from three different color regions revealed the presence of free amino acids, sugars, and fatty acids. Interestingly, LC‐MS shotgun analysis of the red painting region showed the presence of αS1‐casein of buffalo origin. Compared to our previous results from Pompeii's wall paintings, even though the Liternum painting mixture contained also binders of animal origin, the data strongly suggest that in both cases a tempera painting technique was utilized.     

"Oscillating" metallocene catalysts: what stops the oscillation?

The 150 MHz (13)C NMR microstructural analysis of polypropylene samples produced with two representative "oscillating" metallocene catalysts of largely different steric hindrance, namely [(2-(3,5-di-tert-butyl-4-methoxyphenyl)indenyl)(2)ZrP](+) and [(2-phenylindenyl)(2)ZrP](+) (P = polymeryl), and the implications on the origin of the stereocontrol are presented and discussed in detail. The original mechanistic proposal of an "oscillation" between a rac-like (isotactic-selective) and a meso-like (nonstereoselective) conformation cannot explain the observed polymer configuration. The isotactic-stereoblock nature of the polymers obtained with the former catalyst proves unambiguously that the active cation "oscillates" between the two enantiomorphous rac-like conformations at an average frequency that, even at high propene concentration, is only slightly lower than that of monomer insertion. The less-hindered [(2-phenylindenyl)(2)ZrP](+) gives instead a largely stereoirregular polypropylene, which is the logical consequence of a faster ligand rotation; however, depending on the use conditions (in particular, on the nature of the cocatalyst and the polarity of the solvent), the polymerization products may also contain appreciable amounts of a fairly isotactic fraction. The peculiar microstructure of this fraction, with isotactic blocks of the same relative configuration spanned by very short atactic ones, rules out the possibility that the latter are due to an active species in meso-like conformation and points rather to a conformationally "locked" rac-like species with restricted ring mobility. The hypothesis of a stereorigidity induced by the proximity to a counteranion, which would play the role of the interannular bridge in the rac-bis(indenyl) ansa-metallocenes, was tested by computer modeling on a [rac-(2-phenylindenyl)(2)ZrMe(C(3)H(6))][B(C(6)F(5))(4)] ion couple and found viable.     

Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Agricultural biomasses as sorbents of some trace metals

The studies of sorption of six metal ions (Cd²⁺, Cu²⁺, Pb²⁺, Zn²⁺, Ni²⁺, Cr³⁺ and Cr(VI)) from by-products of agriculture are taken into account. The Langmuir q_max values obtained with the use of different biomasses are evaluated and, in order to acquire comparable results, the necessity of using molar concentrations is stressed. The main effects of pH on sorption are estimated by considering both the behaviour of metal ions (hydrolysis and hydroxide precipitation) and the effect of pH on coordination, using a simulated example. Some considerations are made on the information that can be obtained using the most common isotherms and on the need to use chemical dimensions rather than weight in order to make comparison among various metal ions (since atomic weight differences deeply alter the significance of parameters in non-chemical units) and to predict the effects of competition between two (or more) of these for the same sorbent sites on the biomass surface.     

Urea-, squaramide-, and sulfonamide-based anion receptors: a thermodynamic study

In this work, we compare the anion-binding capabilities of receptors 1-5, characterized by similar structures, but possessing different hydrogen-bond-donor moieties (urea, squaramide, and sulfonamide). The presence of chromophoric substituents on the receptor's skeleton allowed the determination of association constants by performing UV/Vis titrations with the investigated anions on solutions of the receptors in pure acetonitrile. Additional quantitative studies of the anion-binding properties of receptors 1-5 were performed by isothermal titration calorimetry (ITC). The experimental results indicated that 1 and 2 formed 1:1 hydrogen-bonded complexes with most of the anions investigated. In the case of receptors 3-5, the formation of the 1:1 adduct was observed only with anions of low basicity (i.e., chloride, bromide, iodide, and hydrogen sulfate). With more basic anions (i.e., acetate and dihydrogen phosphate), both spectrophotometric and ITC titrations accounted for the deprotonation of the sulfonamide group, involving the formation of the conjugated base of the receptor.