Development and validation of a capillary electrophoresis method for determination of enantiomeric purity and related substances of esomeprazole in raw material and pellets

A capillary electrophoresis method using CDs for quality control of esomeprazole (ESO) in terms of enantiomeric purity and related substances in raw material and pellets was developed. ESO is the S‐enantiomer of omeprazole (OMZ). Several parameters were evaluated, including type and concentration of buffer and CD, concentration of additives and electrolyte pH. Resolution between the enantiomers of OMZ obtained for each parameter tested was calculated and the presence of the main related substance such as OMZ sulfone was carefully monitored. The optimized system consisted of 100 mM Tris‐phosphate buffer pH 2.5 with 20 mM 2‐hydroxypropyl‐β‐CD, 1 mM sodium dithionite, temperature at 15°C, voltage at 28 kV, and UV detection at 301 nm. Once optimized, the electrophoretic system was validated according to ICH guidelines. The limits of detection and quantification for R‐OMZ were 0.6 μg/mL (0.06% w/w of ESO) and 2.0 μg/mL (0.2% w/w of ESO), respectively. A mean concentration of R‐OMZ <0.2% limit established by the United States Pharmacopeia (USP) was found in the raw material and six‐pellet samples of ESO. No other impurities were found in the samples under these conditions. Therefore, the developed method was found to be appropriate not only for enantiomeric quality control of ESO but also for the analysis of ESO and the main related substance in raw material and pharmaceutical formulations as well as for stability indicating studies.     

Complete wetting of curved microscopic channels

We have measured the adsorption of argon films on arrays of microscopic nonlinear cusps and of semicircular channels. In the former case, we observe a distinct crossover from a planarlike to a geometry dependent growth behavior near liquid-vapor bulk coexistence, characterized by a growth exponent chi equal to -0.96+/-0.04 in very good agreement with the predictions of a recent scaling theory [C. Rascon and A. O. Parry, J. Chem. Phys. 112, 5175 (2000)]. The crossover location is also consistent with theory. Instead, on the concave channels we find a much steeper growth near saturation that may signal the formation of two menisci at both sides of the channel bottom.     

Materials for peripheral nerve regeneration

Recent efforts in scientific research in the field of peripheral nerve regeneration have been directed towards the development of artificial nerve guides. We have studied various materials with the aim of obtaining a biocompatible and biodegradable two layer guide for nerve repair. The candidate materials for use as an external layer for the nerve guides were poly(caprolactone) (PCL), a biosynthetic blend between PCL and chitosan (CS) and a synthesised poly(ester-urethane) (PU). Blending PCL, which is a biocompatible synthetic polymer, with a natural polymer enhanced the system biocompatibility and biomimetics, fastened the degradation rates and reduced the production costs. Various novel block poly(ester-urethane)s are being synthesised by our group with tailored properties for specific tissue engineering applications. One of these poly(ester-urethane)s, based on a low molecular weight poly(caprolactone) as the macrodiol, cycloesandimethanol as the chain extender and hexamethylene diisocyanate as the chain linker, was investigated for the production of melt extruded nerve guides. We studied natural polymers such as gelatin (G), poly(L-lysine) (PL) and blends between chitosan and gelatin (CS/G) as internal coatings for nerve guides. In vitro and in vivo tests were performed on PCL guides internally coated either with G or PL to determine the differences in the quality of nerve regeneration associated with the type of adhesion protein. CS/G natural blends combined the good cell adhesion properties of the protein phase with the ability to promote nerve regeneration of the polysaccharide phase. Natural blends were crosslinked both by physical and chemical crosslinking methods. In vitro neuroblast adhesion tests were performed on CS/G film samples, PCL/CS and PU guides internally coated with G to evaluate the ability of such materials towards nerve repair.     

Inclusion complexes of γ-cyclodextrin and carboxyl-modified γ-cyclodextrin with C60: synthesis, characterization and controlled release application via microgels

Carboxyl modified γ-cyclodextrin (CDSA) with a substitution degree of about 9.5 was prepared by the esterification of γ-cyclodextrin (CD) with succinic anhydride in pyridine at 90 °C. The chemical composition and the structure of CDSA were characterized by FT-IR, MALDI-TOF, X-ray diffraction pattern, potentiometric titration and TGA. Modified and native γ-cyclodextrin associate with fullerene (C₆₀) in DMF-toluene mixture resulting 1:1 CDSA:C₆₀ and CD:C₆₀ inclusion complexes. Aqueous solutions of native cyclodextrin, carboxyl-modified cyclodextrin and their inclusion complexes with C₆₀ were used as microgel solvent (or swelling agent) for controlled release application. The release of solutions was induced by shear stress and demonstrated using rheo-optical set-up.     

A novel second-order standard addition analytical method based on data processing with multidimensional partial least-squares and residual bilinearization

In the presence of analyte-background interactions and a significant background signal, both second-order multivariate calibration and standard addition are required for successful analyte quantitation achieving the second-order advantage. This report discusses a modified second-order standard addition method, in which the test data matrix is subtracted from the standard addition matrices, and quantitation proceeds via the classical external calibration procedure. It is shown that this novel data processing method allows one to apply not only parallel factor analysis (PARAFAC) and multivariate curve resolution-alternating least-squares (MCR-ALS), but also the recently introduced and more flexible partial least-squares (PLS) models coupled to residual bilinearization (RBL). In particular, the multidimensional variant N-PLS/RBL is shown to produce the best analytical results. The comparison is carried out with the aid of a set of simulated data, as well as two experimental data sets: one aimed at the determination of salicylate in human serum in the presence of naproxen as an additional interferent, and the second one devoted to the analysis of danofloxacin in human serum in the presence of salicylate.     

A sinapic acid–calix[4]arene hybrid selectively binds Pb over Hg and Cd

The binding affinity for Pb²⁺, Cd²⁺ and Hg²⁺ of the sinapic acid–calix[4]arene hybrid 2, having four sinapyl pendants at the upper rim, has been investigated via an UV–Vis study. Compound 2 has better complexing ability than the monomeric p-phenetidine derivative 1. This highlights that the clustering of sinapyl units in a basket-like structure, dictated by the calixarene scaffold, greatly enhances the complexing properties. Ligand 2 forms complexes even with Hg²⁺, which is not complexed by 1 at all; the complexes formed by 2 with Pb²⁺ and Cd²⁺ are much stronger than the analogous complexes formed by 1. The UV–Vis investigation shows that the hybrid 2 markedly favors Pb²⁺ over Cd²⁺ and Hg²⁺. Information on the structural properties of the complex species was obtained by ¹H NMR spectroscopy. NMR data show that all three metal ions are placed into the cavity consisting of the calixarene scaffold and the sinapyl pendants, though their binding affects the coordinating regions to a different extent.     

Homophymine A, an anti-HIV cyclodepsipeptide from the sponge Homophymia sp

A new anti-HIV cyclodepsipeptide, homophymine A, was isolated from a New Caledonian collection of the marine sponge Homophymia sp. The structure of homophymine A was determined by interpretation of spectroscopic data, acid hydrolysis, and LC-MS analysis. Homophymine A contains 11 amino acid residues and an amide-linked 3-hydroxy-2,4,6-trimethyloctanoic acid moiety. Along with four D-, two L-, and one N-methyl amino acids, it also contains four unusual amino acid residues: (2S,3S,4R)-3,4-diMe-Gln, (2R,3R,4S)-4-amino-2,3-dihydroxy-1,7-heptandioic acid, L-ThrOMe, and (2R,3R,4R)-2-amino-3-hydroxy-4,5-dimethylhexanoic acid. In a cell-based XTT assay, homophymine A exhibited cytoprotective activity against HIV-1 infection with a IC50 of 75 nM.     

Glycolipids from sponges. 20. J-Coupling analysis for stereochemical assignments in furanosides: structure elucidation of vesparioside B, a glycosphingolipid from the marine sponge Spheciospongia vesparia

Reinvestigation of the glycosphingolipid composition of the marine sponge Spheciospongia vesparia revealed the presence of vesparioside B ( 2a), a new furanose-rich hexaglycosylated glycosphingolipid that is the most complex glycosphingolipid isolated from a marine sponge to date. The structure of the new compound was elucidated using extensive 2D NMR studies and chemical degradation. Particularly useful for structure elucidation of vesparioside B was a quantum mechanical computational study, showing that in furanosides a vicinal coupling constant <2.0 Hz (for H-1/H-2 or H-3/H-4) or <3.5 Hz (for H-2/H-3) is a proof of the trans orientation of the relevant protons. This general rule, combined with ROE data, allowed us to elucidate the relative stereochemistry (including anomeric configuration) of the three furanose five-membered rings.     

Pentakis(trifluoromethyl)phenyl, a sterically crowded and electron-withdrawing group: synthesis and acidity of pentakis(trifluoromethyl)benzene, -toluene, -phenol, and -aniline

A general route to functionalized pentakis(trifluoromethyl)phenyl (C6(CF3)5) derivatives, promising building blocks for designing novel stable carbenes, radical species, superacids, weakly coordinating anions and other practically and theoretically useful species, is presented. This pertrifluoromethylation route proceeds via conveniently pregenerated (trifluoromethyl)copper (CF3Cu) species in DMF, stabilized by addition of 1,3-dimethyl-2-imidazolidinone (DMI). These species react with hexaiodobenzene at ambient temperature to give the potassium pentakis(trifluoromethyl)phenoxide along with hexakis(trifluoromethyl)benzene and pentakis(trifluoromethyl)benzene in a combined yield of 80%. A possible reaction pathway explaining the formation of pentakis(trifluoromethyl)phenoxide is proposed. Pentakis(trifluoromethyl)phenol gives rise to easily functionalized pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)aniline. Pertrifluoromethylation of pentaiodochlorobenzene and pentaiodotoluene allows straightforward access to pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)toluene, respectively. XRD structures of several C6(CF3)5 derivatives were determined and compared with the calculated structures. Due to the steric crowding the aromatic rings in all C6(CF3)5 derivatives are significantly distorted. The gas-phase acidities (Delta Gacid) and pKa values in different solvents (acetonitrile (AN), DMSO, water) for the title compounds and a number of related compounds have been measured. The origin of the acidifying effect of the C6(CF3)5 group has been explored using the isodesmic reactions approach.