Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

Effect of acid concentration on closed-vessel microwave-assisted digestion of plant materials

The efficiency of microwave-assisted acid digestion of plants using different concentrations of nitric acid (2.0, 3.0, 5.0, 7.0 and 14 mol l⁻¹) with hydrogen peroxide (30% v/v) was evaluated by measuring the residual carbon content (RCC) using inductively coupled plasma optical emission spectrometry (ICP-OES) with axial viewing. Certified reference materials were used for evaluating the accuracy attained when 2 mol l⁻¹ HNO₃ was employed for digestion. Under all experimental conditions RCC values were always lower than 13% w/v, and even the highest concentration did not cause any interference with element recovery. It seems that the high pressure reached for closed-vessel operation improved the oxidative action of nitric acid due to consequent temperature increase, even when this reagent was not used at high concentrations. According to acid–base titration data, residual acid in the digestates varied from 1.2 to 4.0 mol l⁻¹, depending on the acid concentration initially added. It can be concluded that for plant materials, microwave-assisted acid digestion can be carried out under mild conditions, which implies that digestates do not need extensive dilution before introduction by pneumatic nebulization to ICP-OES. An additional advantage is the lower amount of residue generated when working with less concentrated acid solutions.     

Enhancing Intersystem Crossing in Phenotiazinium Dyes by Intercalation into DNA

Phenothiazinium dyes are used as photosensitizers in photodynamic therapy. Their mode of action is related to the generation of triplet excited states by intersystem crossing. Therefore, rationalizing the factors that influence intersystem crossing is crucial to improve the efficacy of photodynamic therapy. Here we employ quantum mechanics/molecular mechanics calculations to investigate the effect of aqueous and nucleic acid environments on the intersystem crossing mechanism in methylene blue. We find that the mechanism by which the triplet states are generated depends strongly on the environment. While intersystem crossing in water is mediated exclusively by vibronic spin–orbit coupling, it is enhanced in DNA due to a second pathway driven by electronic spin–orbit coupling. Competing charge‐transfer processes, which are also possible in the presence of DNA, can therefore be suppressed by a suitable structural functionalization, thereby increasing the efficacy of photodynamic therapy.     

Casbane diterpene as a promising natural antimicrobial agent against biofilm-associated infections

Croton nepetaefolius is a native plant from northeastern Brazil that belongs to the Euphorbiaceae family. The biological action of this plant has been extensively explored, being the secondary metabolites responsible for its properties alkaloids, diterpenes, and triterpenes. This study aimed to evaluate the ability of casbane diterpene (CD), isolated from the ethanolic extract of C. nepetaefolius, to inhibit microbial growth and biofilm formation of several clinical relevant species (bacteria and yeasts). It was found that CD possessed biocidal and biostatic activity against the majority of the species screened, with minimal active concentrations ranging between 125 and 500 μg/mL. In addition, it was observed that biofilm formation was inhibited even when the planktonic growth was not significantly affected. In conclusion, CD showed potential to be a natural tool for the treatment of diseases caused by different infectious microorganisms.     

Influence of salt stress on essential oil yield and composition of lemon grass (Cymbopogon schoenanthus L. Spreng. ssp. Laniger (Hook) Maire et Weil)

Cymbopogon is an aromatic plant valued for its citrus scent aroma. In this article, the effect of saline irrigation water on yield and quality of Cymbopogon schoenanthus L. was evaluated. Compounds of essential oils were identified by gas chromatography-mass spectrometry and/or (13)C-NMR spectroscopy. Results showed that the growth of the aerial part was not affected at a concentration of 50 mmol NaCl. Under salt stress, the content of major chemical compounds was affected differently by the treatment level.     

In situ microbial fuel cell-based biosensor for organic carbon

The biological oxygen demand (BOD) may be the most used test to assess the amount of pollutant organic matter in water; however, it is time and labor consuming, and is done ex-situ. A BOD biosensor based on the microbial fuel cell principle was tested for online and in situ monitoring of biodegradable organic content of domestic wastewater. A stable current density of 282±23mA/m(2) was obtained with domestic wastewater containing a BOD(5) of 317±15mg O(2)/L at 22±2°C, 1.53±0.04mS/cm and pH 6.9±0.1. The current density showed a linear relationship with BOD(5) concentration ranging from 17±0.5mg O(2)/L to 78±7.6mg O(2)/L. The current generation from the BOD biosensor was dependent on the measurement conditions such as temperature, conductivity, and pH. Thus, a correction factor should be applied to measurements done under different environmental conditions from the ones used in the calibration. These results provide useful information for the development of a biosensor for real-time in situ monitoring of wastewater quality.     

Cork-based activated carbons as supported adsorbent materials for trace level analysis of ibuprofen and clofibric acid in environmental and biological matrices

In this contribution, powdered activated carbons (ACs) from cork waste were supported for bar adsorptive micro-extraction (BAμE), as novel adsorbent phases for the analysis of polar compounds. By combining this approach with liquid desorption followed by high performance liquid chromatography with diode array detection (BAμE(AC)-LD/HPLC-DAD), good analytical performance was achieved using clofibric acid (CLOF) and ibuprofen (IBU) model compounds in environmental and biological matrices. Assays performed on 30 mL water samples spiked at the 25.0 μg L(-1) level yielded recoveries around 80% for CLOF and 95% for IBU, under optimized experimental conditions. The ACs textural and surface chemistry properties were correlated with the results obtained. The analytical performance showed good precision (<15%), suitable detection limits (0.24 and 0.78 μg L(-1) for CLOF and IBU, respectively) and good linear dynamic ranges (r(2)>0.9922) from 1.0 to 600.0 μg L(-1). By using the standard addition methodology, the application of the present approach to environmental water and urine matrices allowed remarkable performance at the trace level. The proposed methodology proved to be a viable alternative for acidic pharmaceuticals analysis, showing to be easy to implement, reliable, sensitive and requiring low sample volume to monitor these priority compounds in environmental and biological matrices.     

The 1H NMR method for the determination of the absolute configuration of 1,2,3-prim,sec,sec-triols

The absolute configuration of 1,2,3-prim,sec,sec-triols can be assigned by comparison of the 1H NMR spectra of the tris-(R)- and the tris-(S)-MPA ester derivatives. An experimental demonstration of this correlation with 24 triols of known absolute configuration and a protocol using two parameters-Deltadelta(RS)(H3) and the difference between Deltadelta RS (H2) and Deltadelta RS (H3) = absolute value (Delta(Deltadelta RS))-for its application to the determination of the absolute configuration of other triols are presented.     

Electrophilic aromatic nitration: understanding its mechanism and substituent effects

Theoretical calculations and gas-phase mass spectrometric studies were performed for the reaction of the naked (NO2+) and monosolvated (CH3NO2.NO2+) nitronium ion with several monosubstituted aromatic compounds. From these studies, we propose a general model for regioselectivity based on the single-electron transfer (SET) mechanism and an alternative mechanistic scheme for electrophilic aromatic nitration. This scheme considers the SET and the polar (Ingold-Hughes) mechanisms as extremes in a continuum pathway, the occurrence and extents of both mechanisms being governed mainly by the ability, or lack of ability, of the aromatic compound to transfer an electron to NO2+.     

The Stereochemistry of 1,2,3‐Triols Revealed by 1H NMR Spectroscopy: Principles and Applications

The conformational compositions of the tris(α‐methoxy‐α‐phenylacetic acid) ester derivatives of 1,2,3‐prim,sec,sec‐triols are presented. These conformations have been determined by theoretical and experimental data (i.e., energy‐ and chemical‐shift calculations, circular dichroism (CD) experiments, coupling‐constant analysis, enantioselective deuteration experiments, and low‐temperature NMR spectroscopic studies). A detailed analysis of the anisotropic effects due to the most significant conformers in the ¹H NMR spectra supported the correlation between the ¹H NMR spectra (Δδ^RS value of H(3′) and |Δ(Δδ^RS)| parameters) and the absolute configuration of the substrate. The study also allows the identification of the pro‐R and pro‐S methylene protons from their vicinal coupling constants and relative chemical shifts.