Fragmentation dynamics of size-selected pyrrole clusters prepared by electron impact ionization: forming a solvated dimer ion core

Structure and dynamics of size-selected charged pyrrole clusters have been studied by means of molecular beam scattering experiments and ab initio calculations. Small neutral Pyn clusters were produced in Py/He mixture expansions, and the scattering experiment with a secondary beam of He-atoms was exploited to select the neutral clusters of different sizes. The complete size-selected fragmentation patterns for the neutral dimer to the tetramer after an electron impact ionization at 70 eV were obtained from the measurements of the angular and velocity distributions at different fragment masses. All the investigated cluster sizes decay mainly to the monomer ions Py+1 (from 60 to 80% of the corresponding neutral size) and to the dimer ion Py+2 (20-30%). The trimer ions Py+3 are generated to less than 10% from the neutral trimer and tetramer. To explain the observed results, we have calculated the structures and energetics of pyrrole clusters up to the trimer for the neutral and the ionic state using DFT and PMP2 methods. The ab initio calculations show that ionized pyrrole clusters are formed with a dimeric core that is solvated by neutral pyrrole molecules. In addition, the ground and ionic state of Py-Ar complexes were calculated at CCSD(T) level with extended basis in relevance to the mixed clusters produced in supersonic expansions of Py seeded in Ar. The calculated dissociation energies of the Py-Ar and (Py-Ar)+ complexes indicate that Ar atoms are able to rapidly evaporate after ionization. The combined analysis of the fragmentation probabilities, and calculations allowed us to estimate the distribution of energy deposited in the clusters after the electron impact, which peaks above 1 eV and has a tail up to 5 eV.     

Pd@Pt Core–Shell Nanoparticles with Branched Dandelion‐like Morphology as Highly Efficient Catalysts for Olefin Reduction

A facile synthesis based on the addition of ascorbic acid to a mixture of Na₂PdCl₄, K₂PtCl₆, and Pluronic P123 results in highly branched core–shell nanoparticles (NPs) with a micro–mesoporous dandelion‐like morphology comprising Pd core and Pt shell. The slow reduction kinetics associated with the use of ascorbic acid as a weak reductant and suitable Pd/Pt atomic ratio (1:1) play a principal role in the formation mechanism of such branched Pd@Pt core–shell NPs, which differs from the traditional seed‐mediated growth. The catalyst efficiently achieves the reduction of a variety of olefins in good to excellent yields. Importantly, higher catalytic efficiency of dandelion‐like Pd@Pt core–shell NPs was observed for the olefin reduction than commercially available Pt black, Pd NPs, and physically admixed Pt black and Pd NPs. This superior catalytic behavior is not only due to larger surface area and synergistic effects but also to the unique micro–mesoporous structure with significant contribution of mesopores with sizes of several tens of nanometers.     

Evaluation of suspected interferents for TNT detection by ion mobility spectrometry

The use of ion mobility spectrometry systems to detect explosives in high security situations creates a need to determine compounds that interfere and may compromise accurate detection. This is the first study to identify possible interfering air contaminants common in airport settings by IMS. Seventeen suspected contaminants from four major sources were investigated. Due to the ionization selectivity gained by employing chloride reactant ion chemistry, only 7 of the 17 compounds showed an IMS response. Of those seven compounds, only 4,6-dinitro-o-cresol (4,6DNOC) was found to have a similar mobility to 2,4,6-trinitrotoluene (TNT) with K(o) values of 1.55 and 1.50 cm(2) V(-1) s(-1), respectively. Although baseline resolution between TNT and 4,6DNOC was not achieved, the drift time for TNT was still easily identified. Alkyl-nitrated phenols, due to acidic fog, responded the strongest in the IMS. The effect of contamination on TNT sensitivity was investigated. Charge competition between TNT and 2,4-dinitrophenol (2,4DNP) was found to occur and to effect TNT sensitivity.     

Exceptional gas permeation selectivity of a glued Langmuir-Blodgett bilayer by pH control

The monolayer properties of 5,11,17,23,29,35-hexakis[(N,N,N-trimethylamonium)-N-methyl-37,38,39,40,41,42-hexakis-n-hexadecyloxy-calix[6]arene hexachloride (1) have been characterized over aqueous solutions of poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) as a function of pH. At high pH values (e.g., pH 10), such monolayers show relatively low surface viscosities. At low pH (e.g., pH 4.4), these monolayers exhibit relatively high surface viscosities. The barrier properties of single Langmuir-Blodgett bilayers of 1, which have been ionically cross-linked (i.e., "glued together") with PAA were found to correlate with changes in surface viscosity. Thus, bilayers that were fabricated under low pH conditions exhibited high permeation barriers and high permeation selectivity with respect to He and N(2). Given the extreme thinness of these glued bilayers (ca. 6 nm), the optimized He/N(2) selectivity of ca. 1000 is extraordinary. These results, taken together, demonstrate the feasibility of fine tuning the surface viscosity of monolayers of 1, and also the barrier properties of corresponding glued bilayers, by adjusting the pH of an aqueous subphase that contains a weak polyacid.     

Cu-phthalocyanine overlayers on ZnO (1\bar 100) surfaces

Photoconductivity measurements and ellipsometric spectroscopy have been used to study Cu-phthalocyanine (CuPc) overlayers on nonpolar ZnO (1 \(\bar 1\) 00) surfaces which have been prepared in ultrahigh vacuum (UHV). In the spectral range between 1.5 and 2 eV, i.e. in theπ→π ^* absorption band of CuPc a sensitized photoconductivity in the ZnO substrate is found. The analysis of the ellipsometric data suggests a chemisorption bond of the first monolayer of sublimated CuPc molecules accompanied by charge transfer between the ZnO substrate and the adsorbate. Bonding is most probably done through theπ-orbitals of the CuPc molecules.     

Reactivity studies of S-methylthiophenium tetrafluoroborates

The polarographic behavior of four S-methylthiophenium tetrafluoroborates, I-IV, has been investigated in Britton-Robinson aqueous buffers. The compounds under study were the S-methylbenzo[b]thiophenium (I), S-methylnaphtho[2,3-b]thiophenium (II), S-methyldibenzothiophenium (III), and S-methylnaphtho[2,1-b]thiophenium (IV) tetrafluoroborates which were obtained from the parent sulfur heterocycles by their reaction with methyl iodide and silver tetrafluoroborate in 1,2-dichloroethane, II and IV being new compounds. Compounds I-IV give two one-electron reduction waves and the more positive wave appears to be associated with an electron transfer from the electrode to the LUMO of the substrate as indicated by the experimental E_1/2 vs calculated LUMO values plot (Figure 2). The rates of demethylation of the ions I-IV with the iodide ion acting as the nucleophile have been determined in the Britton-Robinson buffer (pH 6)-acetonitrile solution at 24°. The results of the polarographic study and of the kinetic studies with the iodide ion confirm the high reactivity of S-methylthiophenium ions which originates in the antiaromatic destabilization of these structures.     

Glued Langmuir-Blodgett bilayers having unusually high He/CO2 permeation selectivities

Single Langmuir-Blodgett bilayers derived from 5,11,17,23,29,35-hexakis[(N,N,N-trimethylammonium)-N-methyl-37,38,39,40,41,42-hexakis-n-hexamedecyloxy-calix[6]arene hexachloride (1), which have been ionically cross-linked (i.e., "glued together") with poly(acrylic acid), have been found to exhibit He/CO2 permeation selectivities as high as 150. This degree of selectivity, for a membrane that is less than 6 nm in thickness, is without precedent. In principle, materials of this type could lead the way to improved membranes for hydrogen purification.     

Ellipsometric spectroscopy of the ZnO nonpolar(1\bar 100) surface

Ellipsometric spectroscopy has been performed on nonpolar ZnO surfaces in the spectral range 1.5 eV<ħω<4.0 eV. Absolute measurements with two different crystal orientations in air allow the determination of the optical constantsn _∥,k _∥ andn _⊥,k _⊥ for light polarized parallel and perpendicular to thec-axis. The ellipsometric angles Δ and ψ are changed remarkably on ultrahigh vacuum cleaved surfaces near the band gap energy of ∼3.4eV when oxygen or atomic hydrogen is adsorbed or when the crystal is annealed. This observation is interpreted in terms of a field effect on the optical constants in the space charge layer.     

Calibration lines passing through the origin with errors in both axes

Linear regression of calibration lines passing through the origin was investigated for three models of y-direction random errors: normally distributed errors with an invariable standard deviation (SD) and log normally and normally distributed errors with an invariable relative standard deviation (RSD). The weighted (weighting factor is x ² _i ), geometric and arithmetic means of the ratios y _i /x _i estimate the calibration slope for these models, respectively. Regression of the calibration lines with errors in both directions was also studied. The x-direction errors were assumed to be normally distributed random errors with either an invariable SD or invariable RSD, both combined with a constant relative systematic error. The random errors disperse the true, unknown x-values about the plotted, demanded x-values, which are shifted by the constant relative systematic error. The systematic error biases the slope estimate while the random errors do not. They only increase automatically the slope estimate uncertainty, in which the uncertainty component reflecting the range of the possible values of the systematic error must be additionally included. Received: 9 May 2000 Accepted: 7 March 2001