Flexible cellulose derivative PDLC type cells

In this work we perform a study of 250 ≈ μm thick flexible electro-optical PDLC type cells made from a biocompatible cellulose derivative film and several conductive substrates. The deposition of an ITO layer by reactive thermal evaporation on a polymeric substrate was referred to in the literature very recently and this type of coated substrate was used in the present work. In order to consider the influence of the substrates on the electro-optical behaviour of the cells, five cells were made using different substrates (three flexible polymers and two glass for comparison). Three of the substrates were coated under the same conditions, and the other two were commercially available substrates.     

Simple HPLC‐UV for the quantification of a new leishmanicidal candidate (E)‐1‐4(trifluoromethyl) benzylidene)‐5‐(2‐4‐dichlorozoyl) carbonylhydrazine (LASSBio‐1736) in rat plasma for pharmacokinetics assessment

In this study, a sensitive HPLC‐UV assay was developed and validated for the determination of LASSBio‐1736 in rat plasma with sodium diclofenac as internal standard (IS). Liquid–liquid extraction using acetonitrile was employed to extract LASSBio‐1736 and IS from 100 μL of plasma previously basified with NaOH 0.1 M. Chromatographic separation was carried on Waters Spherisorb^®S5 ODS2 C₁₈ column (150 × 4.6 mm, 5 μm) using an isocratic mobile phase composed by water with triethylamine 0.3% (pH 4), methanol and acetonitrile grade (45:15:40, v/v/v) at a flow rate of 1 mL/min. Both LASSBio‐1736 and IS were eluted at 4.2 and 5 min, respectively, with a total run time of 8 min only. The lower limit of quantification was 0.2 μg/mL and linearity between 0.2 and 4 μg/mL was obtained, with an R² > 0.99. The accuracy of the method was >90.5%. The relative standard deviations intra and interday were <6.19 and <7.83%, respectively. The method showed the sensitivity, linearity, precision, accuracy and selectivity required to quantify LASSBio‐1736 in preclinical pharmacokinetic studies according to the criteria established by the US Food and Drug Administration and European Medicines Agency. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of bifunctional cyclic carbonates from CO2 catalysed by choline-based systems

Easily prepared choline iodide is an active catalyst for the synthesis of cyclic carbonates through the coupling reaction of CO₂ and epoxides using low pressure (1 MPa), moderate temperature (85 ºC) and green solvents (ethanol and propan-2-ol). The effects of reaction temperature, pressure, reaction time and amount of catalyst used were also investigated. The results showed moderate to high yields and excellent selectivities of cyclic carbonates with vinyl or acrylate groups under mild reaction conditions. The heterogenization of choline over a Merrifield resin gives access to a supported catalyst with good recyclability and reactivity that can be extended to a variety of terminal epoxide substrates.     

Synthesis of 3-iodothiophenes via iodocyclization of (Z)-thiobutenynes

A simple synthesis of 3-iodothiophenes was demonstrated using a wide range of (Z)-thioenynes. The key step in the iodocyclofunctionalization was the selective reduction of the triple bond in (Z)-thioenynes by the addition of iodine as an electrophilic agent. The 3-iodothiophenes were obtained in good to excellent yields of 61–92%. The 3-iodothiophenes were used as substrates in Sonogashira cross-coupling reactions to obtain thiophene acetylenes.     

Chemical Strategies for Dendritic Magneto-plasmonic Nanostructures Applied to Surface-Enhanced Raman Spectroscopy

Chemical analyses in the field using surface-enhanced Raman scattering (SERS) protocols are expected to be part of several analytical procedures applied to water quality monitoring. To date, these endeavors have been supported by developments in SERS substrate nanofabrication, instrumentation portability, and the internet of things. Here, we report distinct chemical strategies for preparing magneto-plasmonic (Fe₃O₄ : Au) colloids, which are relevant in the context of trace-level detection of water contaminants due to their inherent multifunctionality. The main objective of this research is to investigate the role of poly(amidoamine) dendrimers (PAMAMs) in the preparation of SERS substrates integrating both functionalities into single nanostructures. Three chemical routes were investigated to design magneto-plasmonic nanostructures that translate into different ways for assessing SERS detection by using distinct interfaces. Hence, a series of magneto-plasmonic colloids have been characterized and then assessed for their SERS activity by using a model pesticide (thiram) dissolved in aqueous samples.     

Effect of mating delay on the ovary of Melipona quadrifasciata anthidioides (Hymenoptera: Apidae) queens

The effect of mating delay on the ovary structure of virgin queens of Melipona quadrifasciata anthidioides (Hymenoptera: Apidae) was investigated. Virgin queens 15, 20, 25 and 30 days old were dissected to analyze their degree of ovary degeneration. To verify whether the degeneration would cause permanent sterility, virgin queens of the same ages (15, 20, 25 and 30 days) were mated and accompanied for at least 14 days to verify whether there was physogastry and then dissected. The ovaries were analyzed by histology, histochemical tests and TUNEL to verify programmed cell death. The results showed that mating delay interrupted oogenesis preventing vitellogenesis. Mating delay results in ovary degeneration which increased with queen age. However, even when there was ovariole degeneration, 25-day-old virgin queens after mating presented normal ovariole activation.     

Isolation and characterization of cellulose nanofibers from banana peels

Cellulose nanofibers were isolated from banana peel using a combination of chemical treatments, such as alkaline treatment, bleaching, and acid hydrolysis. The suspensions of chemically treated fibers were then passed through a high-pressure homogenizer 3, 5, and 7 times, to investigate the effect of the number of passages on the properties of the resulting cellulose nanofibers. The cellulose nanofibers isolated in this study had a dry basis yield of 5.1 %. Transmission electron microscopy showed that all treatments effectively isolated banana fibers in the nanometer scale. The micrographs of the process steps used to isolate the nanofibers revealed gradual removal of amorphous components. Increasing number of passages in the homogenizer shortened the cellulose nanofibers while furnishing more stable aqueous suspensions with zeta potential values ranging from ?16.1 to ?44.1 mV. All the samples presented aspect ratio in the range of long nanofibers, hence being potentially applicable as reinforcing agents in composites. X-ray diffraction studies revealed that homogenized nanofiber suspensions were more crystalline than non-homogenized suspensions. Fourier transform infrared spectroscopy confirmed that alkaline treatment and bleaching removed most of the hemicellulose and lignin components present in the banana fibers. Thermal analyses revealed that the developed nanofibers exhibit enhanced thermal properties. In general, the nanoparticles isolated from the banana peel have potential application as reinforcing elements in a variety of polymer composite systems.