Synthesis and some reactions of indolo[2,1-c]-1,4-oxazinium perchlorates

Summary The reaction of acyl perchlorates with 1 phenacylskatole affords the previously unknown 1-R-lamethyl-3phenylindolo[2,1-c1-1,4oxazinium salts, which undergo recyclization by the action of ammonia to the corresponding indolo[2,1-alpyrazines. It is found that the salts (R = CHj, CZHS) also form dimers of their anhydro bases. The perchlorate (R = Ph) is converted to indolo[2,141-1, 2, S-triazepine by the action of hydrazine.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1041-1047, August, 1994.     

Spectropolarised ray-tracing simulations in densely packed particulate medium

Light scattering from particulate medium is simulated using the Monte Carlo ray-tracing technique. The medium is modelled as a randomly packed medium of ellipsoidal grains with stochastically rough surfaces, with an optional thin coating. Optical properties are modelled using a wavelength-dependent complex refractive index and taking Fresnelian reflections and refractions from the interfaces. The size and shape of the grains are assumed to be large and smooth enough for geometric optics to apply reasonably well.The ray-tracing technique uses parallel, weighted rays for computing simultaneously over a wide wavelength spectrum and a small roughness range, and scaling to obtain a large range of sizes and absorbities simultaneously. Polarisation is fully accounted for. The multiobservation technique is effectively used at each scattering point. The scattering from thinner sample layers is also received as a subresult.Simulations are run for a set of model samples to study the effects and sensitivities regarding the values of certain parameters. It has been found that the size and composition of the grains affect the scattering in a unique and invertible way. The shape of the grain causes similar significant effects that must certainly be taken into account if any accuracy is required, although inverting for the shape is difficult without further constraints. The packing density has a small but observable effect. Polarisation can be used to study the composition of low-albedo objects.     

Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

Hybrid free radical/cationic frontal photopolymerizations

The irradiation of hybrid photopolymer systems consisting of a free radically polymerizable multifunctional acrylate monomer and a cationically polymerizable epoxide or oxetane monomer was conducted under conditions where only the free radical polymerization takes place. This results in the formation of a free‐standing polyacrylate network film containing quiescent oxonium ions along with the unreacted cyclic ether monomer. The subsequent application of a point source of heat to the film ignites a cationic ring‐opening frontal polymerization that emanates from that site and propagates to all portions of the irradiated sample. This article examines the impact of various molecular structural and experimental parameters on these novel hybrid frontal polymerizations that produce interpenetrating network polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4331–4340, 2007     

A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 1. Theoretical analysis

With the use of an analytical approach developed, the influence of distribution of a tangential load on the stress concentration in uniaxially tensioned flat specimens of high-strength unidirectional composites near the grips of a testing machine is evaluated. In view of singularity of the analytical solution derived at the points of discontinuity of boundary conditions, for estimating the stress concentration, it is suggested to employ the averaged value of longitudinal stresses, which is calculated by means of an improper integral across the thickness of a near-surface layer. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 6, pp. 787–796, November–December, 2006.     

Asymptotic estimation of states of linear nonautonomous systems with scalar output

For a linear nonautonomous system with one output, the existence conditions for an identifier that estimates the current state with exponential rate are established. An algorithm for constructing such an identifier is described and its dependence on small perturbations of coefficients is studied.     

Transport properties of polyphenylquinoxalines

The correlation between chemical structure and gas transport properties is considered for a new class of membrane materials based on structurally similar polyphenylquinoxalines that are characterized by different numbers of flexible-O-ether bonds in the repeating unit and different chain rigidities. Permeability, diffusion, and solubility coefficients have been estimated for the gases H₂, He, O₂, N₂, CO, CO₂, and CH₄; separation factors for various gas pairs have been determined. For the materials with a similar level of cohesive energy density, which characterizes interchain interactions, permeability decreases with a decrease in chain rigidity, whereas selectivity of gas separation increases.     

Electronic structure and elastic moduli of the simple cubic fullerite C24—A new allotropic carbon modification

The energy band structure, equation of state, density of states, and elastic moduli of a new allotropic carbon modification, namely, fullerite C₂₄ with a simple cubic lattice (known previously as cubic graphite), are calculated by the full-potential linearized augmented-plane-wave (FLAPW) method with geometry optimization for the first time. The dependence of the total energy on the lattice constant exhibits a minimum for a ₀ = 0.60546 nm. In this case, the lengths of the C-C bonds between fullerene molecules, the lengths of the 6,6-bonds shared by hexagons, and the lengths of the 4,6-bonds shared by a square and a hexagon are equal to 0.1614, 0.1503, and 0.1637 nm, respectively. An analysis of the energy band structure and the density of states demonstrates that the simple cubic fullerite C₂₄ is a direct-band-gap insulator or a semiconductor with a band gap of 1.6 eV. The calculated bulk modulus B ₀ = 196 GPa and the elastic moduli C ₁₁ = 338 GPa, C ₁₂ = 139 GPa, and C ₄₄ = 30 GPa indicate that the fullerite under investigation is a mechanically stable material. The inference is made that the simple cubic fullerite C₂₄ is a new diamond-like molecular zeolite with a unique combination of properties, such as the porosity and nonpolarizability, on the one hand, and the mechanical strength, chemical inertness, and high thermal conductivity, on the other hand. The simple cubic fullerite C₂₄ can be considered a promising low-dielectric-constant (low-k) material (?₀ < 5.7) for use in fabricating interconnections and substrates intended for integrated circuits and nanoelectronics.