Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Low-lying states of trinuclear mixed-valence cluster: [Fe3S4]0

Low-lying energy states of the [Fe₃S₄]⁰ cluster have been calculated by taking into account the double exchange, superexchange and vibronic interaction. It was found that the adiabatic potential of the excited state withS=0 corresponds to the full delocalization of the “excess” charge. From the analysis of experimental data of Mössbauer spectroscopy and the temperature dependence of the magnetic susceptibility the double exchange parametert≥4000 cm^?1 and the vibronic interaction parameter λ₂/2k cm^?1 have been estimated.     

Method of linear prediction in the ultrasonic spectroscopy of rock

The possibility of using the resonant acoustic spectroscopy method for testing the internal state of rock is considered. This method can be used for the determination of the concentration of defects and their spatial distribution. A rock specimen with defects is characterized by a high loss of vibrational energy, which leads to the overlapping of the resonant responses. In this case, the complex resonant frequencies are determined as the parameters of a model that describes the measured transfer function of the response of the mechanical system. The linearity of the vibratory system is used as the a priori information for presetting the functional dependences of the model. An algorithm is developed for the determination of the parameters of the resonances in conditions of their partial overlapping. Examples are presented to demonstrate the possibility of analyzing the complex elastic constant tensor of rock by the acoustic spectroscopy method. The proposed method of experimental data processing provides the possibility for the determination of the weak anisotropy that occurs in the velocity of sound because of a partial fracture of rock.     

Conditional Time Before Ruin of an Insurance Company

The statistical characteristics of conditional time before ruin of an insurance company, including the distribution function of conditional time and its moments are examined.     

Jahn-teller chromium ions in CdF<Subscript>2</Subscript> and CaF<Subscript>2</Subscript> crystals: An EPR spectroscopic study in the frequency range 9.3–300 GHz

The bivalent chromium impurity centers in CdF₂ and CaF₂ crystals are investigated using electron paramagnetic resonance (EPR) in the frequency range 9.3–300 GHz. It is found that Cr²⁺ ions in the lattices of these crystals occupy cation positions and form [CrF₄F₄]^6? clusters whose magnetic properties at low temperatures are characterized by orthorhombic symmetry. The parameters of the electron Zeeman and ligand interactions of the Cr²⁺ ion with four fluorine ions in the nearest environment are determined. The initial splittings in the system of spin energy levels of the cluster are measured.     

Signal recording in acoustooptical imaging of scattering media

An expression for a signal at the ultrasonic frequency from a photodetector arising when diffraction waves at the cathode mix is obtained for the case when the optical and acoustic beams are space-limited and Bragg angles are small. The alternating current generated when the scattering medium is crossed by a focused 3-MHz ultrasonic beam and illuminated by a cw He-Ne laser is measured. Satisfactory agreement between experimental results and those calculated from the formulas obtained indicates that our model treating acoustooptical interaction in the medium in terms of Raman-Nath diffraction is valid. Conditions for measuring the alternating current (which is a parameter of acoustooptical imaging) that are optimal from the viewpoint of maximizing the signal and signal-to-noise ratio are predicted theoretically and corroborated experimentally.     

Potential distribution in ferroelectric ceramic during pulsed exoelectron emission

The potential and polarization distributions in a planar emitting layer of PLZT-9/65/35 ferroelectric ceramic with a set of conductive strip electrodes on the emitting side and a continuous electrode on the opposite side are studied by numerical methods. The state arising immediately after polarization switching at the leading edge of an applied voltage pulse (i.e., before the polarization charges are screened by free charges) is considered. When the pulsed field strength far exceeds the double coercive field, regions with alternating polarization are found to form in the surface layer between the strips. The normal component of the polarization at its maxima is close to saturation. The electric field on both sides of the surface varies as the polarization vector and reaches 200 kV/cm. At surface microirregularities, the electric field strength is much higher. This means that field emission is responsible for electron escape from the ferroelectric ceramic during pulsed polarization switching.     

The Universe in the Logunov Metric

Exact solutions of the Lagrange equations in the Logunov metric are found in the context of classical gravitation theory.     

Creation of a donor-acceptor pair for studying intraprotein electron transfer with the participation of amino-acid derivatives of fullerene C60

Efficient quenching of eosin phosphorescence by amino-acid derivatives of fullerene (AADFs) such as C₆₀-alanine and C₆₀-glycine in aqueous solutions indicates the possibility of transferring electrons from eosin to fullerene upon collisions or in the exciplex state. To investigate electron transfer in the protein structure, we studied the process of incorporation of C₆₀-alanine and C₆₀-glycine into the heme pocket of myoglobin by controlling Förster quenching. The dissociation constant for the protein-AADF complex was estimated.