EXPRESSIONS FOR PREDICTING FUNDAMENTAL NATURAL FREQUENCIES OF NON-CYLINDRICAL HELICAL SPRINGS

Numerical and analytical studies are performed for the free vibration analysis of non-cylindrical (conical, barrel and hyperboloidal types) helical springs. The stiffness matrix method is used in the numerical analysis. A total of 12 degrees of freedom (six displacements and six rotations) is described for an element. The exact element stiffness matrix and the exact concentrated element inertia matrix are used in the formulation. The rotary inertia, the shear and extensional deformation effects are considered in the analysis. Comparison of the numerical results with the reported results obtained numerically and experimentally gives satisfactory values. After verification of the numerical frequencies, the non-dimensional fundamental frequencies of fixed-fixed non-cylindrical helical springs with circular section are expressed in a simple formula with a maximum absolute relative error of 5% using those numerical values for the constant helix pitch angles (5°, 10°, and 15°). These expressions restricted to the fundamental frequencies are also verified with ANSYS results.     

Dynamical Characteristics of Traveling Wave Packets of Total Electron Content Disturbances

Using the COPHASE method and the GPS interferometry method for travelling ionospheric disturbances, we analyze in detail the spatio-temporal properties of travelling wave packets (TWP) of total electron content (TEC) disturbances. The analysis is performed on the example of a clearest TWP manifestation observed in California, USA, in October 18, 2001, using the GLOBDET technique, developed at the Institute of Solar-Terrestrial Physics of the Siberian Branch of RAS for global detection and monitoring of natural and technogenic ionospheric disturbances on the basis of TEC variations retrieved from the global network of GPS receivers. In the time domain, TWPs are quasi-periodic TEC oscillations of duration about 1 h, period of 10–20 min, and amplitude exceeding that of the background TEC fluctuations by at least one order of magnitude. The velocity and direction of TWP motion are similar to those of mid-latitude mesoscale travelling ionospheric disturbances, as obtained earlier from the analysis of phase parameters of HF radio signals and the signals of geostationary satellites and discrete space radio sources.     

Temperature and junction-type dependency of Andreev reflection in MgB2

We studied the voltage and temperature dependency of the dynamic conductance of normal metal-MgB₂ junctions obtained either with the point-contact technique (with Au and Pt tips) or by making Ag-paint spots on the surface of MgB₂ samples. The fit of the conductance curves with the generalized BTK model gives evidence of pure s-wave gap symmetry. The temperature dependency of the gap, measured in Ag-paint junctions (dirty limit), follows the standard BCS curve with 2Δ/k_BT_c=3.3. In out-of-plane, high-pressure point-contacts we obtained almost ideal Andreev reflection characteristics showing a single small s-wave gap Δ=2.6±0.2 meV (clean limit).     

Towards Treating Correlations in Bose Condensates

 We use the adiabatic hyperspheric expansion and the Faddeev decomposition of the wave function with only s-waves. We derive for a fixed hyperradius an integro-differential equation for the angular eigenvalue and wave function. The correlations lower the interaction energy for N = 20 by about a factor of 5. Received October 22, 2001; accepted for publication November 5, 2001     

TOPOLOGY DESIGN OF STRUCTURES SUBJECTED TO PERIODIC LOADING

Although a lot of attention in the topology optimization literature has focused on the optimization of eigenfrequencies in free vibration problems, relatively little work has been done on the optimization of structures subjected to periodic loading. In this paper, we propose two measures, one global and the other local, for the minimization of vibrations of structures subjected to periodic loading. The global measure which we term as the “dynamic compliance” reduces the vibrations in an overall sense, and thus has important implications from the viewpoint of reducing the noise radiated from a structure, while the local measure reduces the vibrations at a user-defined point. Both measures bring about a reduction in the vibration level by moving the natural frequencies which contribute most significantly to the measures, away from the driving frequencies, although, as expected, in different ways. Quite surprisingly, the structure of the dynamic compliance optimization problem turns out to be very similar to the structure of the static compliance optimization problem. The availability of analytical sensitivities results in an efficient algorithm for both measures. We show the effectiveness of the measures by presenting some numerical examples.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V_G), the capacitance-voltage C(V_G) measurements were plotted and analysed. The saturation current I_s, the serial resistance R_s and the mean ideality factor n are, respectively, equal to 2.03 × 10⁻⁵ A, 85 Ω, 1.7 under dark and to 3.97 × 10⁻⁵ A, 67 Ω, 1.59 under illumination. The analysis of I(V_G) and C(V_G) characteristics allows us to determine the mean interfacial state density N_ss and the transmission coefficient θ_n equal, respectively, to 4.33 × 10¹² eV⁻¹ cm⁻², 4.08 × 10⁻³ under dark and 3.79 × 10¹² eV⁻¹ cm⁻² and 5.65 × 10⁻³ under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C⁻²(V_G) characteristic.     

Navier-Stokes approximation and problems of the Chapman-Enskog projection for kinetic equations

The purpose of this paper is to investigate problems of the Navier-Stokes approximation to kinetic equations in terms of the so-called Chapman-Enskog projection. One considers properties of the Chapman-Enskog projection for the Cauchy problem for moment approximations of the kinetic equation and primarily the Chapman-Enskog projection for the Boltzmann-Peierls kinetic equation. The existence of the Chapman-Enskog projection for the Cauchy problem is proved for the phase space of conservative variables (phenomena of nonlinear diffusion) and for the phase space of physical variables (the second sound projection). __________ Translated from Trudy Seminara imeni I. G. Petrovskogo, No. 25, pp. 184–225, 2005.     

Semi‐analytical integration of the 8‐node plane element stiffness matrix using symbolic computation

The semi‐analytical integration of an 8‐node plane strain finite element stiffness matrix is presented in this work. The element is assumed to be super‐parametric, having straight sides. Before carrying out the integration, the integral expressions are classified into several groups, thus avoiding duplication of calculations. Symbolic manipulation and integration is used to obtain the basic formulae to evaluate the stiffness matrix. Then, the resulting expressions are postprocessed, optimized, and simplified in order to reduce the computation time. Maple symbolic‐manipulation software was used to generate the closed expressions and to develop the corresponding Fortran code. Comparisons between semi‐analytical integration and numerical integration were made. It was demonstrated that semi‐analytical integration required less CPU time than conventional numerical integration (using Gaussian‐Legendre quadrature) to obtain the stiffness matrix. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

An optodynamic method for the real-time determination of the depth of a laser-drilled hole

An experimental method for determining the real-time depth of laser-drilled holes is presented. The proposed method involves detecting the laser-induced optoacoustic waves generated during the interaction of the laser beam with the material. Our optodynamic study involved measuring the propagation times of these waves as they traveled through the material and analyzing their temporal behavior during the drilling process. The experimental observations revealed an exponential relationship between the propagation time of the longitudinal stress wave and the number of consecutive laser pulses. Received: 25 October 2001 / Accepted: 27 October 2001 / Published online: 20 December 2001