On the macroscopic dynamics induced by a model wave-particle collision operator

The macroscopic dynamics of a kinetic equation involving a model wave-particle collision operator of plasma physics is investigated. The Chapman-Enskog asymptotics is first considered in the framework of a hydrodynamic scaling. The obtained macroscopic model still involves a kinetic variable, the particle energy in the rest frame of the fluid, but shares similarities with the compressible Navier-Stokes equation of gas dynamics. Then a diffusive scaling is examined under the hypothesis of small perturbations of a global equilibrium. In this case, the macroscopic model couples the usual incompressible Navier-Stokes with a diffusion equation for the energy distribution function of the particles, constrained by an extended version of the Boussinesq relation. In both cases, the effect of a Lorentz force term is developed, in the perspective of plasma physical modelling. Received June 16, 1997     

Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material

This report deals with thermophysical properties and measuring methods of shape-stabilized paraffin as a new type of latent heat storage material, which keeps the same shape in a solid state when the paraffin melts. Therefore, this type paraffin can be used in a latent heat storage system without encapsulation. A transient hot wire method, a differential scanning calorimeter (DSC), a water calorimeter and a volume expansion meter, which were developed in the present study, were used to measure effective thermal conductivity, latent heat, specific heat and density of the shape-stabilized paraffin, respectively. From the obtained data, useful correlation equations of the above-mentioned thermophysical properties of the shape-stabilized paraffin were expressed as functions of physical property and mass fraction of each constituent of the shape-stabilized paraffin.     

Supersonic flow over a cone with heat release in the neighborhood of the apex

Supersonic flow over a cone mounted in the wake of a spherical source of heat release is investigated. The free-stream nonuniformity generated by the source leads to effective drag reduction.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.2, pp. 110–114, March–April, 1993.     

Heat transfer in flow past a continuously moving semi-infinite flat plate in transverse magnetic field with heat flux

Thermal boundary layer on a continuously moving semi-infinite flat plate in the presence of transverse magnetic field with heat flux has been examined. Similarity solutions have been derived and the resulting equations are integrated numerically. This investigation has indicated a fall in the temperature of the thermal boundary layer with increase in magnetic field parameter.

---

Wärmeübertragung in Strömungen an einer gleichmäßig bewegten, halbunendlichen ebenen Platte in einem quergerichteten Magnetfeld mit Wärmefluß

Zusammenfassung Es ist die thermische Grenzschicht auf einer gleichmäßig bewegten, halbunendlichen ebenen Platte in einem quergerichteten Magnetfeld mit Wärmefluß untersucht worden. Ähnlichkeitslösungen sind abgeleitet und die erhaltenen Gleichungen numerisch integriert worden. Diese Untersuchung hat einen Rückgang der Temperatur in der thermischen Grenzschicht mit steigendem Magnetfeldparameter nachgewiesen.

     

Structures and regimes of shear flow in a plane cavity with translating boundaries

Stability of shear flow in a plane cavity whose boundaries translate in opposite directions is analyzed by solving the nonstationary Navier-Stokes equations numerically. It is shown that, depending on the Reynolds number and the cavity aspect ratioH/R, there may exist either a single-vortex, or a multi-eddy, or an intermediate flow regime with a bridge, all of which are stable. No oscillatory regime was found forH/L=0.1–10 and Re=1–3000.Nizhnii Novgorod, Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, pp. 53–56, March–April, 1995.     

FD-method for a nonlinear eigenvalue problem with discontinuous eigenfunctions

An algorithm for the solution of a nonlinear eigenvalue problem with discontinuous eigenfunctions is developed. The numerical technique is based on a perturbation of the coefficients of a differential equation combined with the Adomian decomposition method for the nonlinear term of the equation. The proposed approach provides an exponential convergence rate dependent on the index of the trial eigenvalue and on the transmission coefficient. Numerical examples support the theory. Published in Neliniini Kolyvannya, Vol. 10, No. 1, pp. 126–143, January–March, 2007.     

Plasma mitigation of shock wave: experiments and theory

Two types of plasma spikes, generated by on-board 60 Hz periodic and pulsed dc electric discharges in front of two slightly different wind tunnel models, were used to demonstrate the non-thermal plasma techniques for shock wave mitigation. The experiments were conducted in a Mach 2.5 wind tunnel. (1) In the periodic discharge case, the results show a transformation of the shock from a well-defined attached shock into a highly curved shock structure, which has increased shock angle and also appears in diffused form. As shown in a sequence with increasing discharge intensity, the shock in front of the model moves upstream to become detached with increasing standoff distance from the model and is eliminated near the peak of the discharge. The power measurements exclude the heating effect as a possible cause of the observed shock wave modification. A theory using a cone model as the shock wave generator is presented to explain the observed plasma effect on shock wave. The analysis shows that the plasma generated in front of the model can effectively deflect the incoming flow; such a flow deflection modifies the structure of the shock wave generated by the cone model, as shown by the numerical results, from a conic shape to a curved one. The shock front moves upstream with a larger shock angle, matching well with that observed in the experiment. (2) In the pulsed dc discharge case, hollow cone-shaped plasma that envelops the physical spike of a truncated cone model is produced in the discharge; consequently, the original bow shock is modified to a conical shock, equivalent to reinstating the model into a perfect cone and to increase the body aspect ratio by 70%. A significant wave drag reduction in each discharge is inferred from the pressure measurements; at the discharge maximum, the pressure on the frontal surface of the body decreases by more than 30%, the pressure on the cone surface increases by about 5%, whereas the pressure on the cylinder surface remains unchanged. The energy saving from drag reduction is estimated to make up two-thirds of the energy consumed in the electric discharge for the plasma generation. The measurements also show that the plasma effect on the shock structure lasts much longer than the discharge period.

---

     

Interaction of thermal radiation with laminar natural convection from a horizontal cylinder in air

The heat transfer rates from a horizontal cylindrical surface of an internally heated tube under constant heat flux conditions are evaluated with the aid of integral analysis giving due consideration to both natural convection and thermal radiation to ambient medium of air. It is observed that non-isothermal conditions around the periphery of the tube arise due to the conjugate effects of the three modes of energy transmission viz., conduction, convection and radiation. The theoretical analysis is further validated with the experimental results and the coincidence is found to be very satisfactory.Die Wärmeübertragungsraten einer horizontalen zylindrischen Oberfläche eines innen erwärmten Rohres mit konstantem Wärmestrom sind mit Hilfe von Integralrechnungen berechnet worden, die sich auf die freie Konvektion und thermische Strahlung mit Luft als Umgebungsmedium beziehen. Es ist beobachtet worden, daß nicht-isotherme Bedingungen am Umfang des Rohres aus den drei Energieübertragungsarten Leitung, Konvektion und Strahlung entstehen. Die theoretische Berechnung wurde mit experimentellen Ergebnissen bestätigt und die Koinzidenz stellte sich als sehr zufriedenstellend heraus.     

Experimental studies on steady free convection heat transfer from fins and fin arrays

This paper deals with an experimental study of free convective heat transfer from fins and fin arrays attached to a heated horizontal base. The technique of differential interferometry has been utilised and experiments have been carried out under steady state conditions. Local values of heat flux, temperature, heat transfer coefficients, local and overall Nusselt numbers have been estimated. An attempt has been made to discuss in detail the flow and heat transfer mechanisms for three cases namely an isothermal vertical flat plate, a single fin attached to a heated horizontal base and a fin array in the light of the experimental findings. Correlations are presented relating the overall Nusselt number with the relevant non-dimensional parameters in these cases.Diese Abhandlung beschäftigt sich mit einer experimentellen Studie über freie konvektive Wärmeübertragung von Rippen und Rippenfeldern, die an eine erwärmte horizontale Grundfläche angebracht sind. Es wurde die Technik der differentiellen Interferometrie verwendet. Die Versuche sind unter konstanten Zustandsbedingungen ausgeführt worden. Lokale Werte des Wärmestroms, der Temperatur, des Wärmeübertragungskoeffizienten sowie lokale und mittlere Nusseltzahlen sind bestimmt worden. Der Strömungs- und Wärmeübertragungsmechanismus wurde an drei Fällen detailliert untersucht: nämlich eine isotherme vertikale ebene Platte; eine einzelne Rippe, angebracht an einer beheizten horizontalen Grundfläche und ein dem Strahlengang entsprechend angeordnetes Rippenfeld. Für diese drei Fälle werden die Berechnungen der mittleren Nusseltzahl in Abhängigkeit der relevanten dimensionslosen Parameter dargestellt.     

Plastic-strain evolution for cyclic loading based on the equations of the field theory of defects

A relation governing the plastic-strain evolution under applied stresses is obtained within the field theory of defects to analyze the specific features of deformation under sign-varying cyclic loading. The effect of the applied stress amplitude, loading frequency, and cycle skewness on the deformation process under uniaxial loading conditions is studied. Specific features of the plastic-strain evolution in a stable deformation process are considered, and the time to failure of the system in an unstable process is determined. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 112–118, May–June, 2006.