New open-chain tetrapyrroles as chromophores in the plant photoreceptor phytochrome

A series of six open-chain tetrapyrroles has been synthesized and used as chromophores for the plant photoreceptor protein phytochrome. The novel chromophores vary in the size of substituents 17 and 18 at ring D. This ring undergoes maximal conformational change upon light excitation ( Z --> E photoisomerization of the 15,16-double bond). Instead of methyl and vinyl substituents (positions 17, 18) as present in the native chromophore phytochromobilin, dimethyl, methyl and isopropyl, methyl and tert-butyl, ethyl and methyl, vinyl and methyl, and isopropyl and methyl substituents have been generated. All novel chromophores assemble with the apoprotein. The obtained chromoproteins show hypsochromic shifts of the absorbance maxima by 10 nm maximally, compared to the native pigment, except for the 17-isopropyl-18-methyl-substituted compound which showed a 100 nm hypsochromic shift of selectively the P r form. The assembly kinetics were slowed down in correlation to the increasing size of the substituents, with stronger effects for modified substituents at position 17. The thermal stability of the photoinduced P fr form for the 18-isopropyl and the 18- tert butyl substituents was even greater than that of the native pigments. Those chromophores carrying substituents at position 17 larger than the methyl group (ethyl and isopropyl) showed a very low stability of the respective P fr forms. Time-resolved detection of the P r to P fr conversion (laser-induced flash photolysis) revealed a slower formation of the P fr form for those chromophores carrying larger substituents at position 18, whereas the rise and decay kinetics of the early intermediates are only moderately changed. Introduction of larger substituents at position 17 (ethyl, vinyl, and isopropyl) causes drastic changes in the kinetics; in particular the formation of the first thermally stable intermediate, I 700, is significantly slowed, making a detection of its rise possible.     

Determination of telmisartan in human blood plasma: Part I: Immunoassay development

Telmisartan is an angiotensin II receptor antagonist and a known drug against high blood pressure. In this report, the development of a new and rapid analytical technique, an enzyme-linked immunosorbent assay (ELISA) for the determination of telmisartan in human blood plasma is described. The immunoassay is based on a conversion of 4-(N-methylhydrazino)-7-nitro-2,1,3-benzooxadiazole (MNBDH) to 4-(N-methylamino)-7-nitro-2,1,3-benzooxadiazole (MNBDA), which is detected by fluorescence spectroscopy. The limit of detection was 0.1 ng/mL, the limit of quantification was 0.3 ng/mL and the working range extended from 0.3 ng/mL to 300 ng/mL.     

A New Thiolate-Bound Dimanganese Cluster as a Structural and Functional Model for Class Ib Ribonucleotide Reductases

In class Ib ribonucleotide reductases (RNRs) a dimanganese(II) cluster activates superoxide (O₂⋅⁻) rather than dioxygen (O₂), to access a high valent Mn^III−O₂−Mn^IV species, responsible for the oxidation of tyrosine to tyrosyl radical. In a biomimetic approach, we report the synthesis of a thiolate-bound dimanganese complex [Mn^II₂(BPMT)(OAc)₂](ClO)₄ (BPMT=(2,6-bis{[bis(2-pyridylmethyl)amino]methyl}-4-methylthiophenolate) ( 1 ) and its reaction with O₂⋅⁻ to form a [(BPMT)MnO₂Mn]²⁺ complex 2 . Resonance Raman investigation revealed the presence of an O−O bond in 2 , while EPR analysis displayed a 16-line S_t=1/2 signal at g=2 typically associated with a Mn^IIIMn^IV core, as detected in class Ib RNRs. Unlike all other previously reported Mn−O₂−Mn complexes, generated by O₂⋅⁻ activation at Mn₂ centers, 2 proved to be a capable electrophilic oxidant in aldehyde deformylation and phenol oxidation reactions, rendering it one of the best structural and functional models for class Ib RNRs.     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

A molecular tool kit for the variable design of logic operations (NOR, INH, EnNOR)

A simple set of five components was used to design molecular logic gates based on phthalimide-sensitised Tb(III) luminescence, including the first report of an enabled NOR (EnNOR) gate.     

High-resolution Mn EXAFS of the oxygen-evolving complex in photosystem II: structural implications for the Mn4Ca cluster

The biological generation of oxygen by the oxygen-evolving complex in photosystem II (PS II) is one of nature's most important reactions. The recent X-ray crystal structures, while limited by resolutions of 3.2-3.5 A, have located the electron density associated with the Mn4Ca cluster within the multiprotein PS II complex. Detailed structures critically depend on input from spectroscopic techniques, such as EXAFS and EPR/ENDOR, as the XRD resolution does not allow for accurate determination of the position of Mn/Ca or the bridging and terminal ligand atoms. The number and distances of Mn-Mn/Ca/ligand interactions determined from EXAFS provide important constraints for the structure of the Mn4Ca cluster. Here, we present data from a high-resolution EXAFS method using a novel multicrystal monochromator that show three short Mn-Mn distances between 2.7 and 2.8 A and, hence, the presence of three di-mu-oxo-bridged units in the Mn4Ca cluster. This result imposes clear limitations on the proposed structures based on spectroscopic and diffraction data and provides input for refining such structures.     

Determination of estrogenic steroids in surface water and wastewater by liquid chromatography-electrospray tandem mass spectrometry

An analytical method is presented which permits trace level determination of 17alpha-ethynylestradiol (EE2), 17beta-estradiol (E2), and estrone (E1). Using this method, the estrogenic steroids were analyzed in drinking water, surface water, and wastewater (sewage influents and effluents) at concentrations down to 0.1 ng/L. Sample volumes between 100 and 500 mL are concentrated using automated solid-phase extraction. Analysis is performed by liquid chromatography with detection by tandem mass spectrometry. Applying simple clean-up procedures and internal standard calibration, recovery losses resulting from matrix-dependent ion suppression during electrospray ionization could be compensated for all of the investigated compounds. Recoveries around 100% were obtained for all analytes after correction using the internal standards. Limits of quantification (LOQ) were between 0.1 and 0.4 ng/L for purified sewage, surface, ground, and drinking water and between 1 and 2 ng/L in the case of raw sewage. Water treatment by wastewater treatment plants (WWTPs) or by a surface water treatment plant affected the removal of all estrogenic steroids. Thus, E1, E2, and EE2 were removed in the municipal WWTPs to the extent of 93%, 93%, and 80%, respectively. In the effluents of the WWTP in Ruhleben (Berlin, Germany), E1, E2, and EE2 were detected at the low ng/L level. E2 and EE2 were, however, not present in the Berlin surface water above the LOQ (0.2 ng/L). E1 was the only compound that could be detected in surface water samples. After additional surface water treatment it was still detectable but only at trace-level concentrations with a mean value of 0.16 ng/L.     

Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.