Use of reference pools to compare the qualitative and quantitative determination of polychlorinated biphenyls by packed and capillary gas chromatography with electron capture detection. Part 1. Serum

Serum for reference pools of in vivo polychlorinated biphenyls (PCBs) was obtained from four goats that had received one dose (100 mg kg-1) of a selected technical Aroclor (AR) (1016, 1242, 1254 or 1260) and were allowed to recover for 30 d. These pools were used to assess the differences in an analytical method that determines and quantifies PCBs using packed-column gas chromatography (PCGC) (quantified on the basis of mean mass percent. data for grouped PCB peaks) and capillary-column gas chromatography (CCGC) (quantified on the basis of percent. composition data for specific congeners). With CCGC, results were statistically significantly different (p less than or equal to 0.0002) from results with PCGC for ARs 1016, 1242 and 1254 but not for AR 1260 (p = 0.23). When comparing these gas chromatographic methods using bovine serum spiked in vitro with the same ARs at 17-25 p.p.b., it was found that the methods were not statistically significantly different for any of the ARs (p = 0.30-0.92). Levels of serum PCB determined by the two methods for 12 persons, divided into two groups according to exposure, were compared using the paired t-test. Group 1 consisted of three persons with dietary and/or environmental exposure; one with dietary and/or environmental exposure in addition to occupational exposure dating back 20 years. Group 2 consisted of eight persons with recent occupational exposure.(ABSTRACT TRUNCATED AT 250 WORDS)     

Extractive spectrophotometric determination of uranium with Malachite Green

A sensitive spectrophotometric method based on the extraction of a uranium-benzoate-Malachite Green complex by chlorobenzene is described. The absorption maximum is at 635 nm and the molar absorptivity is 8.3 x 10(4) 1 mole(-1), cm(-1). A preliminary separation of uranium by extraction with methyl isobutyl ketone from acid-deficient aluminium nitrate solution is used to avoid interferences. An aliquot of the extract is then diluted with chlorobenzene and shaken with benzoate buffer containing Malachite Green (MG). The method has been applied for the determination of uranium in a synthetic leach solution. The complex extracted is probably [MG(2)(C(6)H(5)COO)(3)][MG(+)].     

The molecular structure of tetrathiofulvalene-13C (TTF) from proton magnetic resonance studies using nematic solvents

The molecular structure of TTF dissolved in nematic liquid crystalline solvents has been determined from the proton magnetic resonance including couplings due to ¹³C in natural abundance. The molecule is puckered in a boat conformation with the SCHCHS planes making a dihedral angle of 13 ± 2° with the S₂C  CS₂ plane. The other structural parameters obtained are r_CH = 1.085 ± 0.014 Å and the angel CCH = 123.7 ± 1.5°.     

Luminescence de l'Europium Divalent dans les Fluosilicates MSiF6 (M = Sr,Ba)

Luminescence of Eu²⁺ Ions in Fluosilicates MSiF₆ (M = Sr, Ba) A pure f → f emission is detected in Eu²⁺ doped SrSiF₆ and BaSiF₆. Because of the strong ionic bonding of europium a large gap occurs between the bottom of the 5d band and the ⁶P_7/2 emission level (3000 cm^?1 at 300 K). The emission is very intense under low pressure mercury excitation and decreases slowly with temperature.     

Effect of syndiotacticity on the aqueous poly(vinyl alcohol) gel 3. Mechanical property of gel

Summary The mechanical property of aqueous gel was studied using the PVA having the content of syndiotacticity in diad from 58.4 and 66.2%. The elastic modulus of gels was 105–106 dyne/cm2 and the variation of the elastic modulus of gel with the rise of temperature was corresponded with the variation of the concentration of PVA in gel accompanying syneresis. The elastic modulus of gel having the same content of syndiotacticity and concentration of PVA increased in the order as follows, the first is the gel chilled at room temperature, the second is the gel chilled at 60 °C and last is the gel chilled at 0 °C. The variation of the elastic modulus of gel with the rise of temperature became smaller with increasing content of syndiotacticity. The increase of elastic modulus is considered to be attributed to the further growth of stronger junctions through the recrystallization followed by syneresis rather than the entropic effect of polymer networks with the rise of temperature.

---

Zusammenfassung Es wurden die mechanischen Eigenschaften wßriger Gele aus Polyvinylalkohol untersucht, mit Gehalten an Syndioaktizität in Diaden zwischen 58,4 und 66,2%. Die elastischen Moduln der Gele lagen bei 105 bis 106 dyn/cm2 und die Variation der elastischen Moduln der Gele mit Steigerung der Temperatur entsprach der Konzentrationsänderung von Polyvinylalkohol im Gele gemäß der stattgefundenen Synärese. Der elastische Modul des Gels mit konstantem Gehalt an Syndiotaktizität und Konzentration des PVA steigen in folgender Weise: Zuerst das Gel abgekühlt bei Raumtemperatur, dann das Gel abgekühlt bei 60 °C und zuletzt das Gel erstarrt bei 0 °C. Die Variation der elastischen Moduln mit steigender Temperatur wird kleiner mit steigendem Gehalt an Syndiotaktizität. Das Anwachsen der Moduln sollte vermutlich dem weiteren Wachstum strengerer Kopp lungen durch Rekristallisation infolge der Synärese zuzuschreiben sein mehr als einem Entropieeffekt der polymeren Netzwerke mit steigender Temperatur.

---

---

With 6 figures and 2 tables

---

Part 2. cf. reference 2.     

Persulphate initiated polymerisation of methacrylamide—I: Kinetics and molecular weight dependences

A kinetic study of the aqueous persulphate initiated polymerisation of methacrylamide has shown that the rate of polymerisation is represented by the equation $\text{R}{}_{\mathrm{p}}\text{= k [}\text{M}\text{] [}\text{I}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ where the overall rate constant, $\text{k = 1.3 × 10}{}^9\text{exp}\text{(?18,400/}\text{RT}\text{) 1}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}\text{s}{}^{\mathrm{?1}}$. Chain transfer with monomer, where C_M = 5.4 × 10^?3 at 60°, is shown to be the dominant transfer step. Comparison with kinetic studies of the analogous acrylamide polymerisation shed doubt on the ‘cage effect’ interpretation of complex orders with respect to monomer. An alternative explanation is proposed.     

Application of ESCA to polymer chemistry. VIII. Surface structures of AB block copolymers of polydimethylsiloxane and polystyrene

The surface morphology of a number of films of AB block copolymers of polydimethylsiloxane and polystyrene was examined by ESCA and contact angle measurements. In all cases the immediate surface is shown to consist of an essentially pure polydimethylsiloxane component. By comparing the intensities of elastic peaks corresponding to photoionizations from core levels without energy loss for polydimethylsiloxane and polystyrene with those for the block copolymers and by consideration of shake-up phenomena specific to the polystyrene component, an estimate of the thickness of the polydimethylsiloxane outer layer of the latter may be obtained. This is shown to vary between ～13 and 40 Å, depending on the method of formation of copolymer film.     

Phosphorus in organic synthesis—VII : Diphenyl phosphorazidate (DPPA). A new convenient reagent for a modified curtius reaction

A simple one-step conversion of carboxylic acids to urethanes was achieved by diphenyl phosphorazidate (DPPA). The reaction procedure is quite simple, occurring by refluxing an equimolecular mixture of a carboxylic acid, DPPA, and triethylamine in the presence of a hydroxyl component. Aromatic, aliphatic, and heterocyclic carboxylic acids underwent rearrangements in satisfactory yields. As this modified Curtins reaction is much simpler and less laborious than the classical Curtius reaction and proceeds under mild conditions, it may have a broad synthetic utility.     

Determination de L’oxygene et du fluor au moyen de l’activation par les photons γ et le comptage des neutrons retardes emis par17N

The activation of¹⁸O and¹⁹F by the reactions¹⁸O(γ, p)¹⁷N and¹⁹F(γ, 2p)¹⁷N was determined as a function of the maximum energy of the bremsstrahlung beam. By the use of this method it is possible to measure oxygen or fluorine by counting the delayed neutrons emitted by¹⁷N with a half-life of 4.2 sec.