ELASTO-PLASTIC COUPLED ANALYSIS OF BURIED STRUCTURE AND SOIL MEDIUM BY PERTURBATIONAL SEMI-ANALYTIC METHOD

I.IntroductionMoreandmoreelasto-plasticanalysesareusedinCivilEngineering.TheMohr-Coulombyieldconditionisoftenappliedtorockandsoilmediumtostudythesituationofdestruction.Theperturbationalmethodwasfirstusedinthestudyofcelestialmechanics,thenithasbeenusedinsolidmechanicstocarryoutthegeometricallyandphysicallynonlinearanalysis[']'12].Forlarge?scalcproblems,thegeneralnumericalmethodsmaynotbeapttothiscomplexcalculation,butsemi-analyticalmethodscandoitwell.Touseanalyticalfunctionsinoneortwodirectio…     

多模式自适应重要抽样法及其应用

针对多模式的可靠性分析，研究了其失效概率计算的自适应重要抽样法，该方法用模拟退火 算法来自动调整每个失效模式的重要抽样函数，使其逐渐趋近于估计方差最小的重要抽样 函数. 对于多个模式系统失效概率的计算，采用混合加权自适应重要抽样的方法, 反映了每个 失效模式对系统失效概率的贡献；对于系统失效模式所含基本变量不全相同的情况，提出了 扩展自适应重要抽样法, 来统一所有失效模式中的基本变量，从而使得混合自适应 重要抽样, 可以方便地求解变量不全相同时的系统失效概率. 对估计值方差和变异系数的计算公 式进行了推导. 验证算例结果, 充分说明方法的合理性与可行性.     

Finite difference method for 2-D and 3-D nonlinear free surface wave problems

A finite difference method is developed for the numerical modelling of the 2-D and 3-D unsteady potential flow generated by transient disturbances on the free surface, on which the nonlinear boundary conditions are fully satisfied. The unknown function is computed with an iteration scheme processing in a transformed time-invariant space. After the velocity is calculated, the location of the free surface is renewed and so is the value of velocity on it. The boundary-value problem of the governing equation is then solved at the next time step. The present method incorporates the FFT. Consequently, a tri-diagonal equation system is obtained which could be readily solved. The feasibility of this method has been demonstrated by 2-D and 3-D examples corresponding to different initial disturbances. This work is supported by the science foundation of Academia Sinica. The paper had been accepted by the XVIth International Congress of IUTAM, Lyngby, Denmark, August, 1984.     

挤压油膜阻尼器-滑动轴承-柔性转子系统的动力响应分析

建立了挤压油膜阻尼器-滑动轴承-柔性转子非线性系统的动力学模型,采用Runge-Kutta法进行求解,进而对系统的稳定性和分叉行为进行了研究。仿真计算结果表明,系统能够在一定范围内保持稳定,随着转速的变化系统将会出现倍周期、准周期及混沌响应,从而为有效地控制转子的稳定运行状态提供了理论依据。     

考虑基本变量模糊与随机性的广义自适应重要抽样法

基于模糊随机广义可靠性分析向随机可靠性分析的转换,提出了模糊随机广义失效概率计算的自适应重要抽样法,该方法利用模拟退火智能优化,在模拟的过程中逐步逼近模糊随机广义设计点,并在模拟过程中自适应地构造重要抽样函数,从而使得模糊随机失效概率的计算效率和精度大为提高。与传统的重要抽样法相比,本文方法无需首先求解失效模式的设计点。对非线性失效区和复杂等价概率密度函数,由于模拟退火智能优化在寻找设计点时比诸如一次二阶矩法(FOSM)更为有效,因而所提方法适合非线性失效区和复杂等价概率密度函数情况下的广义可靠性分析。另外,随着重要抽样密度函数逐步向最优值的自动调整,抽取的样本数逐渐增大,使后续构建的重要抽样函数更能体现对广义失效概率贡献的重要程度,并使失效概率的计算更加准确。文中算例证明了所提方法的合理性。     

RESEARCH ON RELIABILITY GROWTH FOR SYNCHRONOUSLY DEVELOPED MULTI-SYSTEMS

IntroductionAMSAA model could evaluate reliability growth test for mono-system perfectly[1-8].Butfor multi-systems,especially for synchronously developed multi-systems,the model parametersneed to be estimated by developing some newmethods.AMSAA-BISE model…     

Transversely isoiropic beam under initial stress

Starling from Novozhilov’s nonlinear equations of elasticity by appropriate simplification and integration over the beam cross-section, a linearized set of equations for a transversely isotropic beam under initial non-uniform state of stress is obtained. In the absence of initial stress, the obtained equations are reduced to well-known Timoshenko beam equations.These equations are applied to investigate the vibration and buckling characteristics of a transversely isotropic beam under uniform initial axial force and bending moment.     

单轴应变硅N沟道金属氧化物半导体场效应晶体管电容特性模型

电容特性模型是单轴应变硅金属氧化物半导体场效应晶体管(Si MOSFET)和电路进行瞬态分析、交流小信号分析、噪声分析等的重要基础. 本文首先建立了单轴应变Si NMOSFET 的16 个微分电容模型, 并将微分电容的仿真结果与实验结果进行了比较, 验证了所建模型的正确性. 同时对其中的关键性栅电容C_gg 与应力强度、偏置电压、沟道长度、栅极掺杂浓度等的关系进行了分析研究. 结果表明, 与体硅器件相比, 应变的引入使得单轴应变Si NMOSFET器件的栅电容增大, 随偏置电压、沟道长度、栅极掺杂浓度的变化趋势保持不变.     

连二亚硫酸钠引发的手性2-取代-4-戊烯酸的氟烷基化反应研究

研究了手性4-戊烯酸衍生物的氟烷基化反应.以连二亚硫酸钠为引发剂,在碱作用下,乙腈水溶液中手性4-戊烯酸与含氟碘代烷-锅法反应得到手性含氟γ-丁内酯.其结构经核磁共振、高分辨质谱、红外光谱确定.其绝对构型经单晶衍射确定.     

相对淌度在微乳液电动色谱法测定药物脂水分配系数中的应用

利用峰漂移法微乳液电动色谱,评价了相对淌度在药物脂水分配系数(lg Po/w)测定中的应用.使用5种不同疏水性化合物验证了此法的可行性,与采用淌度的测量结果进行了比较;并应用提出的方法测定了3种药物的lg Po/w值,实验值与文献值的平均误差为0.18,准确性好.结果表明,使用相对淌度描述被分析物的迁移行为,有效避免了实验过程中溶液粘度变化、电压、电流以及温度等实验条件的波动引入的误差,提高了lg Po/w测定准确性,为药物疏水性的评价提供一种新的选择.