The materials science X‐ray beamline BL8 at the DELTA storage ring

The hard X‐ray beamline BL8 at the superconducting asymmetric wiggler at the 1.5 GeV Dortmund Electron Accelerator DELTA is described. This beamline is dedicated to X‐ray studies in the spectral range from ～1 keV to ～25 keV photon energy. The monochromator as well as the other optical components of the beamline are optimized accordingly. The endstation comprises a six‐axis diffractometer that is capable of carrying heavy loads related to non‐ambient sample environments such as, for example, ultrahigh‐vacuum systems, high‐pressure cells or liquid‐helium cryostats. X‐ray absorption spectra from several reference compounds illustrate the performance. Besides transmission measurements, fluorescence detection for dilute sample systems as well as surface‐sensitive reflection‐mode experiments have been performed. The results show that high‐quality EXAFS data can be obtained in the quick‐scanning EXAFS mode within a few seconds of acquisition time, enabling time‐resolved in situ experiments using standard beamline equipment that is permanently available. The performance of the new beamline, especially in terms of the photon flux and energy resolution, is competitive with other insertion‐device beamlines worldwide, and several sophisticated experiments including surface‐sensitive EXAFS experiments are feasible.     

Lamb shift of laser-dressed atomic states

We discuss radiative corrections to an atomic two-level system subject to an intense driving laser field. It is shown that the Lamb shift of the laser-dressed states, which are the natural state basis of the combined atom-laser system, cannot be explained in terms of the Lamb shift received by the atomic bare states which is usually observed in spectroscopic experiments. In the final part, we propose an experimental scheme to measure these corrections based on the incoherent resonance fluorescence spectrum of the driven atom.     

Solid state 19F NMR parameters of fluorine-labeled amino acids. Part I: aromatic substituents

Structural parameters of peptides and proteins in biomembranes can be directly measured by solid state NMR of selectively labeled amino acids. The 19F nucleus is a promising label to overcome the low sensitivity of 2H, 13C or 15N, and to serve as a background-free reporter group in biological compounds. To make the advantages of solid state 19F NMR fully available for structural studies of polypeptides, we have systematically measured the chemical shift anisotropies and relaxation properties of the most relevant aromatic and aliphatic 19F-labeled amino acids. In this first part of two consecutive contributions, six different 19F-substituents on representative aromatic side chains were characterized as polycrystalline powders by static and MAS experiments. The data are also compared with results on the same amino acids incorporated in synthetic peptides. The spectra show a wide variety of lineshapes, from which the principal values of the CSA tensors were extracted. In addition, temperature-dependent T(1) and T(2) relaxation times were determined by 19F NMR in the solid state, and isotropic chemical shifts and scalar couplings were obtained in solution.     

Variable angle NMR spectroscopy and its application to the measurement of residual chemical shift anisotropy

The successful measurement of anisotropic NMR parameters like residual dipolar couplings (RDCs), residual quadrupolar couplings (RQCs), or residual chemical shift anisotropy (RCSA) involves the partial alignment of solute molecules in an alignment medium. To avoid any influence of the change of environment from the isotropic to the anisotropic sample, the measurement of both datasets with a single sample is highly desirable. Here, we introduce the scaling of alignment for mechanically stretched polymer gels by varying the angle of the director of alignment relative to the static magnetic field, which we call variable angle NMR spectroscopy (VA-NMR). The technique is closely related to variable angle sample spinning NMR spectroscopy (VASS-NMR) of liquid crystalline samples, but due to the mechanical fixation of the director of alignment no sample spinning is necessary. Also, in contrast to VASS-NMR, VA-NMR works for the full range of sample inclinations between 0° and 90°. Isotropic spectra are obtained at the magic angle. As a demonstration of the approach we measure 13C-RCSA values for strychnine in a stretched PDMS/CDCl? gel and show their usefulness for assignment purposes. In this context special care has been taken with respect to the exact calibration of chemical shift data, for which three approaches have been derived and tested.     

TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

TiO₂ thick films deposited on macroporous reticulated Al₂O₃ foams with pore size of 10 ppi and 15 ppi were prepared using dip coating from slurries of Aeroxide^® P25 nanopowder and precipitated titania. All prepared films have sufficiently good adhesion to the surface of the substrate also in case of strongly cracked films. No measurable release of deposited TiO₂ after repeated photocatalytic cycles was observed. The photocatalytic activity was characterized as the rate of mineralization of aqueous phenol solution under irradiation of UVA light by TOC technique. The best activity was obtained with Aeroxide^® P25 coated Al₂O₃ foam with the pore size of 10 ppi, annealed at 600 °C. The optimal annealing temperature for preparation of films from precipitated titania could be determined at 700 °C. Films prepared by sol-gel deposition technique were considerably thinner compared to coatings made of suspensions and their photocatalytic activity was significantly smaller.     

Detecting exposure-dependent changes of liver detoxification capacity of children in a formerly high-loaded industrial area with a 15N-labelled diagnostic tool

The effect of remediation activities in formerly high-loaded industrial areas is measured conventionally in terms of decreased toxic loads. It is more difficult to investigate the effect on physiological parameters of the people living there. A non-invasive 15N-based organ function test, the [15N]methacetin urine test, was adapted to environmental-medical purposes for the detection of small deviations from the norm-range hepatic detoxification capacity. Parallel to the measurement of region-specific external exposure (especially by tri- and tetrachloro ethylene) and of the corresponding internal load (urinary trichloro acetic acid), the hepatic mono oxygenation capacity was determined. The study cohort consisted of 35 kindergarten children who were 3.3+/-0.5 years old at the beginning of the study. They lived in a high-polluted industrial village (n = 23) and in a non-polluted control village close by (n = 12), respectively. Children living in the polluted area were exposed a 2.3 times higher load and showed detoxification capacities 6% lower than the children in the control area. Improvement of the environmental situation led to exposure data decreasing by 70%, which is also reflected in smaller internal load and improved liver detoxification of the children in the polluted area. Then, between loaded and control area the mean hepatic detoxification was no longer significantly different (0.6%). The study shows that chronic low-dose exposure can disturb a hepatic function and that thereafter the capacity is recovered quickly in children. The stable isotope-based test is suited to characterize a health effect of multicomponent exposure by bioeffect monitoring within the framework of screening and testing the remediation efficiency.     

Complex formation between a nanoparticle and a weak polyelectrolyte chain: Monte Carlo simulations

Understanding the complexation processes between nanoparticles and polyelectrolytes is an essential aspect in many branches of nanotechnology, nanoscience, chemistry, and biology to describe processes such as nanoparticle stabilization/destabilization and dispersion, water treatment, microencapsulation, complexation with biomolecules for example, and evolution of the interface of many natural and synthetic systems. In view of the complexity of such processes, applications are often based on empirical or semiempirical observations rather than on predictions based on theoretical or analytical models. In this study, the complex formation between an isolated weak polyelectrolyte and an oppositely charged nanoparticle is investigated using Monte Carlo simulations with screened Coulomb potentials in the grand canonical ensemble. The roles of the nanoparticle surface charge density , solution pH and ionic concentration C_i are systematically investigated. The phase diagrams of complex conformations are also presented. It is shown that the polyelectrolyte conformation at the surface of the nanoparticle is controlled by the attractive interactions with the nanoparticle but also by the repulsive interactions between the monomers. To bridge the gap with experiments titration curves are calculated. We clearly demonstrate that an oppositely charged nanoparticle can significantly modify the acid/base properties of a weak polyelectrolyte.     

Local Minimizers of the Ginzburg-Landau Energy with Magnetic Field in Three Dimensions

We establish the existence of locally minimizing vortex solutions to the full Ginzburg-Landau energy in three dimensional simply-connected domains with or without the presence of an applied magnetic field. The approach is based upon the theory of weak Jacobians and applies to nonconvex sample geometries for which there exists a configuration of locally shortest line segments with endpoints on the boundary.Research partially supported by NSERC grant number 261955     

Interaction dynamics of elastic waves with a complex nonlinear scatterer through the use of a time reversal mirror

This Letter reports on work performed to locate and interrogate a nonlinear scatterer in a linearly elastic medium through the use of a time reversal mirror in combination with nonlinear dynamics. Time reversal provides the means to spatially and temporally localize elastic energy on a scattering feature while the nonlinear dynamics spectrum allows one to determine whether the scatterer is nonlinear (e.g., mechanical damage). Here elastic waves are measured in a solid and processed to extract the nonlinear elastic response. The processed elastic signals are then time reversed, rebroadcast, and found to focus on the nonlinear scatterer, thus defining a time-reversed nonlinear elastic wave spectroscopy process. Additionally, the focusing process illuminates the complexity of the nonlinear scatterer in both space and time, providing a means to image and investigate the origins and physical mechanisms of the nonlinear elastic response.