Kinetics of oxidation of ethyldigol by vanadium(V) in aqueous acidic medium

The kinetics of oxidation of ethyldigol by vanadium(V) in aqueous acidic medium has been carried out. The reaction is first order with respect to vanadium(V) and the substrate and is acid catalysed.Hammett acidity function (H ₀) andBunnett hypothesis have been applied. The formation of free radicals during the course of the reaction has been indicated. A probable reaction mechanism is proposed.

---

Die Kinetik der Oxidation von Ethyldigol mit Vanadium(V) in wäßrigem saurem Medium

Zusammenfassung Es wurde die Kinetik der Oxidation von Ethyldigol mittels Vanadium(V) in wäßriger saurer Lösung untersucht. Die Reaktion ist erster Ordnung bezüglich Vanadium(V) und Substrat und ist säurekatalysiert. Es wurden dieHammett-Aciditätsfunktion (H ₀) und dieBunnett-Hypothese angewandt. Die Bildung von freien Radikalen während der Reaktion konnte bestätigt werden. Es wird ein Reaktionsmechanismus vorgeschlagen.

     

Coupling of narrow-bore liquid chromatography to thin-layer chromatography : Part 2. Application of fluorescence-based spectroscopic techniques for off-line detection

The effluent from a narrow-bore liquid chromatographic (l.c.) separation can be immobilized on thin-layer chromatographic (t.l.c.) plates with little loss of resolution. The deposited compounds are then available for further inspection. For off-line detection, direct fluorescence emission, fluorescence excitation emission spectra, and fluorescence line-narrowing spectroscopy are investigated with tetracene and benz[k] fluoranthene as model compounds. Detection based on direct emission measurements and on measurements for which complete spectra are obtained for the separated compounds, is suitable for identification and determination. Detection limits are of the same order of magnitude as those for on-line detection in narrow-bore l.c. The fluorescence spectra of immobilized compounds can be obtained with a conventional fluorescence spectrometer equipped with a solid-sample accessory. No other special apparatus is needed. The immobilized chromatogram is also suitable for techniques incompatible with flow systems, e.g., fluorescence line-narrowing spectroscopy, which yields fluorescence spectra via laser excitation of low-temperature solid samples. Very selective narrow-line fluorescence spectra were obtained for tetracene deposited on t.l.c. plates in amounts down to the low picogram level.     

A novel method for the preparation of T3 free plasma/serum for routine RIA

A novel method to eliminate T₃ from gross sera/plasma based on prior treatment with 8-anilino-1-naphthalene sulphonic acid has been standardized. This method is rapid with a minimum loss of protein and uses only small quantities of charcoal. The treated sera have been tested for acceptance in the RIA system for routine assays.     

The Biochemical Mechanisms of Antimicrobial Photodynamic Therapy†

The unbridled dissemination of multidrug-resistant pathogens is a major threat to global health and urgently demands novel therapeutic alternatives. Antimicrobial photodynamic therapy (aPDT) has been developed as a promising approach to treat localized infections regardless of drug resistance profile or taxonomy. Even though this technique has been known for more than a century, discussions and speculations regarding the biochemical mechanisms of microbial inactivation have never reached a consensus on what is the primary cause of cell death. Since photochemically generated oxidants promote ubiquitous reactions with various biomolecules, researchers simply assumed that all cellular structures are equally damaged. In this study, biochemical, molecular, biological and advanced microscopy techniques were employed to investigate whether protein, membrane or DNA damage correlates better with dose-dependent microbial inactivation kinetics. We showed that although mild membrane permeabilization and late DNA damage occur, no correlation with inactivation kinetics was found. On the other hand, protein degradation was analyzed by three different methods and showed a dose-dependent trend that matches microbial inactivation kinetics. Our results provide a deeper mechanistic understanding of aPDT that can guide the scientific community toward the development of optimized photosensitizing drugs and also rationally propose synergistic combinations with antimicrobial chemotherapy.     

MnO2 electrodeposition at the positive electrode of zinc-ion aqueous battery containing Zn2+ and Mn2+ cations

Journal of Solid State Electrochemistry - Effects of MnO2 electrodeposition on α, β, γ, and δ-MnO2 polymorphs from aqueous zinc sulfate solution with manganese sulfate additive...     

Spatially Directed Pyrolysis via Thermally Morphing Surface Adducts

Combustion is often difficult to spatially direct or tune associated kinetics—hence a run-away reaction. Coupling pyrolytic chemical transformation to mass transport and reaction rates (Damköhler number), however, we spatially directed ignition with concomitant switch from combustion to pyrolysis (low oxidant). A ‘surface-then-core’ order in ignition, with concomitant change in burning rate,is therefore established. Herein, alkysilanes grafted onto cellulose fibers are pyrolyzed into non-flammable SiO₂ terminating surface ignition propagation, hence stalling flame propagating. Sustaining high temperatures, however, triggers ignition in the bulk of the fibers but under restricted gas flow (oxidant and/or waste) hence significantly low rate of ignition propagation and pyrolysis compared to open flame (Liñán's equation). This leads to inside-out thermal degradation and, with felicitous choice of conditions, formation of graphitic tubes. Given the temperature dependence, imbibing fibers with an exothermically oxidizing synthon (MnCl₂) or a heat sink (KCl) abets or inhibits pyrolysis leading to tuneable wall thickness. We apply this approach to create magnetic, paramagnetic, or oxide containing carbon fibers. Given the surface sensitivity, we illustrate fabrication of nm- and μm-diameter tubes from appropriately sized fibers.     

Determination of total chlorine in waste oil

Summary A simple method has been developed to determine the concentration of organic chlorine in waste oil. The determination is based on the conversion of organic chlorine to inorganic chloride by reaction with sodium biphenyl followed by extraction with nitric acid and a mixture of nitric acid and water. The concentration of chloride is determined by direct potentiometry with an ion-selective electrode. The limit of determination amounts to 3·10^–5 mol·l^–1 chloride ions with a standard deviation of 3.5%. Different samples of waste oil have been analyzed and the results have been compared to those obtained by combustion in a H₂/O₂ flame followed by potentiometric titration with silver nitrate.     

Use of CF3,Br/Al,discharges for reactive ion etching of III-V semiconductors

The reactive ion etching of GaAs, InP, InGaAs, and InAlAs in CF₃Br/Ar discharges was investigated as a function of both plasma power density (0.56-1.3 W - cm^–2) and total pressure (10-40 mTorr) The etch rate of GaAs in 19CF₃Br:1Ar discharges at 10 m Torr increases linearly with power density, from 600 Å min^–1 at 0.56 W · cm^–2, to 1550 Å · min at 1.3 W · cm^–2. The in-based materials show linear increases in etch rates only for power densities above – 1.0 W · cm^–2. These etch rates are comparable to those obtained with CCI₂F₂:O₂ mixtures under the same conditions. Smooth surface morphologies and vertical sidewalls are obtained over a wide range of plasma parameters. Reductions in the near-surface carrier concentration in n-type GaAs are evident for etching with power densities of >0.8 W cm^–2, due to the introduction of deep level trapping centers. At 1.3 W· cm^–2, the Schottky barrier height of TiPtAu contacts on GaAs is reduced from 0.74 to 0.53 eV as a result of this damage, and the photoluminescent intensity from the material is degraded. Alter RIE, we detect the presence of both F and Br on the surface of all of the semiconductors. This contamination is worse than with CCl₂F₂-based mixtures. High-power etching with CF₃Br/Ar together with Al-containing electrodes can lead to the presence of a substantial layer of aluminum oxide on the samples if the moisture content in the reactor is appreciable.