The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Induced smectic C* phases

Induced ferroelectric S*_C phases are formed by non-chiral S_C host phases doped with chiral dipolar guest molecules. In those mixtures the spontaneous polarization P_s and the tilt angle Θ has been investigated as a function of the mole fraction x_G of the chiral dopant. In most cases the reduced polarization P₀ = P_S/ sin Θ has been found to depend linearly on x_G. The polarization power which is defined by δ_P=(∂P₀/∂x_G)ΔT is discussed in terms of the molecular structure of the chiral dopants. There are systems in which P₀(x_G) deviates positively from linearity. This behaviour can be understood by considering a local field correction to P₀. By assuming a local field of Lorentz type a theoretical relation for P₀(x_G) has been derived which explains the experimental results. The effect of a local field is considerable if the transverse dipole moment and the polarizability of the chiral dopant are large.     

On a new class of function systems of Faber-Schauder type

In this paper, we introduce a new class of function systems generalizing the classical Faber-Schauder system. Under the condition that the generating sequence is bounded, we show that systems of such a class constitute bases in the space of continuous functions and prove some properties of series expansions of functions in these systems.     

Mg 2p shallow core-level and local atomic structure of i-ZnMgRE quasicrystals

We present a detailed analysis of the Mg 2p shallow core-levels measured on icosahedral single-grain ZnMgY, ZnMgHo, and ZnMgEr quasicrystals during a photoelectron microscopy study. The synchrotron radiation photoemission measurements were performed on in situ cleaved samples at a pressure of 10⁻¹⁰ mbar and at low temperature, typically 90-150 K. The Mg 2p photoemission lines are essentially broadened as compared to those of the Mg 2p spin-orbit doublet recorded on the Zn₂Mg crystalline Laves phase. The broadening is associated to the coordination shifts of the Mg 2p level due to the inequivalent magnesium sites in the quasicrystalline lattice. The coordination shifts are calculated on the basis of i-ZnMg(Ho, Y) atomic structure data, recently determined from the pair distribution function analysis. The coordination shifts obtained are up to 0.2 eV. The Mg 2p experimental spectral intensity is nicely reproduced by a superposition of coordination-shifted Mg 2p spin-orbit doublets.     

Erratum: Preparation of size‐controlled In2O3 nanoparticles

The article referenced above was first published online on 7 August 2007 with incorrect pagination; the pagination has now been corrected online and in print. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007