Artifacts in the Determination of Trace Metal Binding Forms in Anoxic Sediments by Sequential Extraction

Abstract

The binding forms of Co, Cd, Cu, Pb, and Zn in an anoxic, sulfide-bearing sediment were investigated by performing both thermodynamic equilibrium calculations and sequential extractions. Care was taken to maintain oxygen-free conditions during the whole experiment. The calculations suggested that trace metals were bound to sulfidic minerals. Sequential extraction results, however, showed increased importance of exchangeable and reducible fractions in the order Cu < Cd < Pb < Zn < Co. Thermodynamic equilibrium calculations of the chemical reactions during extraction showed that Cd, Co, Pb, and Zn sulfides are to a significant extent soluble in the acetate-exchangeable (step 1 + 2) and oxalate-reducible (step 3) fractions. Neglecting the dissolution of sulfide minerals would lead to a misinterpretation of the experimental results.     

Status report: preparing an ambient aerosol filter reference material for elemental analysis

Summary For the elemental analysis of aerosol filter samples by X-ray techniques there is a lack of adequate reference materials (RM). No genuine aerosol matrix is available, which has been collected on membrane filters from ambient aerosol and can be distributed in the same physical form. It is possible to collect high-volume ambient aerosol samples, with a uniformity of 5% to 15%, in the elemental deposit ranges of 10 ng/cm² to g/cm² within probed spots of only 4 mm diameter on suitable filter materials. An aerosol sampling campaign is being organized, aiming at the collection of large enough filter batches of aerosols of different origin, suitable for characterization by different analytical methods and compatible with X-ray fluorescence analysis (XRF). To a large extent, the production control - especially for the homogeneity of the elemental mass deposits - will be performed by particle-induced X-ray emission (PIXE) analysis on residual material without consuming any part of the candidate RM stock.Working under contract CBNM/ST/91-147     

Application of ligand-exchange capillary electrophoresis to the chiral separation of alpha-hydroxy acids and beta-blockers

The application of the principle of ligand-exchange capillary electrophoresis to two substance classes is described. As chiral selector N-(2-hydroxyoctyl)-L-4-hydroxyproline-copper(II) complex was used. This principle was applied to the chiral separation of alpha-hydroxy acids and drugs containing amino alcohol structure such as beta-blockers. The enantioselectivity was found to be strongly dependent on pH corresponding to the optimal conditions for complex formation for each structure class.     

Surface-ionization methods and devices of indication and identification of nitrogen-containing base molecules

The results of the development of methods and devices based on the effect of surface ionization (SI) and intended for the selective and sensitive registration and identification of the organic nitrogen base molecules in air and in mixtures of compounds for their chromatographic, ion mobility and mass-spectrometric analysis are presented. The main principles of the SI registration and identification of molecules are considered. The requirements that must be satisfied by devices implementing these principles are stated. The examples of the development of the effective and stable emitters, the simple-in-design diode SI detectors, the gas-chromatographic detectors, the SI gas analyzers of amines and the indicators and analyzers of narcotics including portable ones, SI ion mobility spectrometer and SI mass spectrometer are presented. They have a unique selectivity (up to 10(5)-10(8) with respect to organic solvents) and ionization efficiency (up to approximately 2 x 10(-1)) of amines and their derivatives, including the degradation products of chemical warfare agents, tobacco alkoloids, triazine herbicides, narcotics and other abused medicinal preparations, as well as the sensitivity of up to 6 C/g and picogram level detection limits with a response dynamic range of 5-8 orders of magnitude.     

Synthesis of the dibenzo[f,h]phthalazine and dibenzo[f,h]cinnoline skeleton via a ‘Suzuki-Pd-catalyzed intramolecular arylation’ and a ‘Suzuki-Pschorr’ approach

Palladium-catalyzed intramolecular arylation of 2-benzyl-5-(2-bromophenyl)-4-phenylpyridazin-3(2H)-one yielded hitherto unknown 2-benzyldibenzo[f,h]phthalazin-1(2H)-one. The synthesis of this new tetracyclic pyridazinone from 2-benzyl-5-(2-aminophenyl)-4-phenylpyridazin-3(2H)-one via a Pschorr type reaction was also investigated. Similarly, the construction of 2-methyldibenzo[f,h]cinnolin-3(2H)-one from 2-methyl-5-(2-bromophenyl)-6-phenylpyridazin-3(2H)-one and 2-methyl-5-(2-aminophenyl)-6-phenylpyridazin-3(2H)-one is also reported. Removal of the N-benzyl protective group of 2-benzyl-dibenzo[f,h]phthalazin-1(2H)-one with AlCl₃ yielded unsubstituted dibenzo[f,h]phthalazin-1(2H)-one.     

Synthesis of low molecular weight perfluoro oxymethylene vinyl ethers

Perfluoro oxymethylene vinyl ethers have been formed by a multi-step synthesis. The key intermediates are low molecular weight perfluoropolyether (PFPE) fluoroformates CF₃O(CF₂O)_nCOF (I) n=1-6 obtained from the photo-oxidation of perfluoro propene (HFP) in perfluorohexane. Under certain conditions the light-mediated fluorination of PFPE fluoroformates (I) gives PFPE hypofluorites CF₃O(CF₂O)_nCF₂OF (II), which can be added to sym dichlorodifluoroethene to form the dichloro adduct CF₃O(CF₂O)_nCF₂OCFClCF₂Cl (III) which, after dechlorination, gives the desired vinyl ethers CF₃O(CF₂O)_nCF₂OCFCF₂ (IV). Every reaction step has to be properly controlled as far as the reaction variables are concerned. A mechanistic scheme is presented that is consistent with the observed experimental data.     

Synthesis and structural characterization of Ba(Ln2/3B1/3)O3 (Ln=Dy, Gd and Sm; B=Mo or W) complex perovskites

We describe in this work the synthesis and crystal structure of five rare earth and Mo(VI) or W(VI) containing complex perovskites. The compounds studied are Ba(Dy_2/3Mo_1/3)O₃, Ba(Dy_2/3W_1/3)O₃, Ba(Gd_2/3Mo_1/3)O₃, Ba(Gd_2/3W_1/3)O₃ and Ba(Sm_2/3W_1/3)O₃ and were prepared starting from solutions, by the polymeric precursors method. Structural characterization by HREM, SAED and powder XRD revealed the five compounds to be ordered cubic perovskites, SG Fm-3m (225), with a cell parameter double of that of a simple perovskite cell and increasing as the size of the trivalent lanthanide ion increases (Dy<Gd<Sm).     

Novel iron(III) complexes of tripodal and linear tetradentate bis(phenolate) ligands: close relevance to intradiol-cleaving catechol dioxygenases

Four new iron(III) complexes of the bis(phenolate) ligands N,N-dimethyl-N',N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L1)], N,N-dimethyl-N',N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L2)], N,N'-dimethyl-N,N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L3)], and N,N'-dimethyl-N,N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L4)] have been isolated and studied as structural and functional models for the intradiol-cleaving catechol 1,2-dioxygenases (CTD). The complexes [Fe(L1)Cl] (1), [Fe(L2)(H2O)Cl] (2), [Fe(L3)Cl] (3), and [Fe(L4)(H2O)Cl] (4) have been characterized using absorption spectral and electrochemical techniques. The single-crystal X-ray structures of the ligand H2(L1) and the complexes 1 and 2 have been successfully determined. The tripodal ligand H2(L1) containing a N2O2 donor set represents the metal-binding region of the iron proteins. Complex 1 contains an FeN2O2Cl chromophore with a novel trigonal bipyramidal coordination geometry. While two phenolate oxygens and an amine nitrogen constitute the trigonal plane, the other amine nitrogen and chloride ion are located in the axial positions. In contrast, 2 exhibits a rhombically distorted octahedral coordination geometry for the FeN2O3Cl chromophore. Two phenolate oxygen atoms, an amine nitrogen atom, and a water molecule are located on the corners of a square plane with the axial positions being occupied by the other nitrogen atom and chloride ion. The interaction of the complexes with a few monodentate bases and phenolates and differently substituted catechols have been investigated using absorption spectral and electrochemical methods. The effect of substituents on the phenolate rings on the electronic spectral features and FeIII/FeII redox potentials of the complexes are discussed. The interaction of the complexes with catecholate anions reveals changes in the phenolate to iron(III) charge-transfer band and also the appearance of a low-energy catecholate to iron(III) charge-transfer band similar to catechol dioxygenase-substrate complexes. The redox behavior of the 1:1 adducts of the complexes with 3,5-di-tert-butylcatechol (H2DBC) has been also studied. The reactivities of the present complexes with H2DBC have been studied and illustrated. Interestingly, only 2 and 4 catalyze the intradiol-cleavage of H2DBC, the rate of oxygenation being much faster for 4. Also 2, but not 4, yields an extradiol cleavage product. The reactivity of the complexes could be illustrated not on the basis of the Lewis acidity of the complexes alone but by assuming that the product release is the rate-determining phase of the catalytic reaction.     

Platinum and palladium imido and oxo complexes with small natural bite angle diphosphine ligands

Treatment of L(2)MCl(2) (M = Pt, Pd; L(2) = Ph(2)PCMe(2)PPh(2) (dppip), Ph(2)PNMePPh(2) (dppma)) with AgX (X = OTf, BF(4), NO(3)) in wet CH(2)Cl(2) yields the dinuclear dihydroxo complexes [L(2)M(mu-OH)](2)(X)(2), the mononuclear aqua complexes [L(2)M(OH(2))(2)](X)(2), the mononuclear anion complexes L(2)MX(2), or mixtures of complexes. Addition of aromatic amines to these complexes or mixtures gives the dinuclear diamido complexes [L(2)Pt(mu-NHAr)](2)(BF(4))(2), the mononuclear amine complexes [L(2)M(NH(2)Ar)(2)](X)(2), or the dinuclear amido-hydroxo complex [Pt(2)(mu-OH)(mu-NHAr)(dppip)(2)](BF(4))(2). Deprotonation of the Pd and Pt amine or diamido complexes with M'N(SiMe(3))(2) (M' = Li, Na, K) gives the diimido complexes [L(2)M(mu-NAr)](2) associated with M' salts. Structural studies of the Li derivatives indicate association through coordination of the imido nitrogen atoms to Li(+). Deprotonation of the amido-hydroxo complex gives the imido-oxo complex [Pt(2)(mu-O)(mu-NAr)(dppip)(2)].LiBF(4).LiN(SiMe(3))(2), and deprotonation of the dppip Pt hydroxo complex gives the dioxo complex [Pt(mu-O)(dppip)](2).LiN(SiMe(3))(2).2LiBF(4).