IR double resonance experiments with size selected clusters for identification of isomers

Infrared photodissociation spectra of (CH₃OH) _n clusters (n=2, 3 and 6) and the mixed dimer C₂H₄ · CH₃COCH₃ are presented. The clusters are generated in a supersonic jet expansion and size selected by scattering from a helium atomic beam combined with mass spectrometric detection. Continuous CO₂-lasers are used to vibrationally excite the molecules in the cluster leading to rapid dissociation of the complex. Various dissociation peaks that are found in single-laser dissociation spectra can be assigned unambigously in a pump-probe experiment with two lasers to either different isomers (acetone-ethene dimer) or splitted lines of one isomer (methanol hexamer). For size distributions, the method is able to select contributions of single masses which is demonstrated for mixtures of methanol dimers and trimers.     

Zeolite content determination in kaolinic clays via thermal effects

For application in catalysis and adsorption processes, zeolites are synthesized on the surface of spray-dried kaolin microspheres. Various thermal effects are used for the rapid characterization of the zeolite type and content. From DTA measurements, the exothermic lattice break-down peak gives information on the zeolite type and the thermal stability of the sample. Measurements of the heats of immersion by a very simple and quick method allow conclusions about the type and the sorption properties of the zeolite part of the clay. The most precise method to estimate the zeolite content was a standardized technique of desorption and readsorption of water or organic compounds by means of a thermobalance.

---

Zusammenfassung Zur Anwendung in der Katalyse und bei Adsorptinsprozessen werden Zeolithe auf der Oberfläche sprüh-getrockneter Kaolin-Mikrokugeln eingesetzt. Verschiedene thermische Effekte werden zur schnellen Charakterisierung des Zeolith-Typs und -Gehalts genutzt. Der exotherme DTA-peak beim Gitterzusammenbruch liefert Informationen über Zeolith-Typ und thermische Stabilität der Probe. Eine sehr einfache Schnellmethode zur Messung der Immersionswärmen erlaubt Schlussfolgerungen über Typ und Sorptionseigenschaften des zeolithischen Anteils des Tons. Die genaueste Methode zur Bewertung des Zeolithgehalts war eine standardisierte thermogravimetrische Desorptions- und Readsorptions-Methode mit Wasser oder organiscen Verbindungen.

---

, , , . . , . , , . , .

     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Double hexagonal chains with minimal total <Emphasis Type="Italic">π</Emphasis>-electron energy

The total energy of all π-electrons in a conjugated hydrocarbon (within the framework of HMO approximation) is the sum of the absolute value of all the eigenvalues of its corresponding graph. In this paper, we consider “double hexagonal chains” as benzenoids constructed by successive fusions of successive naphthalenes along a zig–zag sequence of triples of edges as appear on opposite sides of each naphthalene unit. It is shown that if the fusions are such as to give a polyaceacene then the total π-electron energy is the minimum from among all the double hexagonal chains with the same number of naphthalene units.      

Solid-phase extraction and HPLC determination of 4-vinyl guaiacol and its precursor, ferulic acid, in orange juice.

This study is undertaken to develop a simplified, rapid method to determine both immediate and potential off odors due to 4-vinyl guaiacol and its odorless precursor, ferulic acid, from a single sample preparation and chromatographic analysis. Orange juice sample preparation consists of a simple, C18 solid phase extraction. Utilizing a 5-microns, 25-cm, C18 column, both compounds can be separated within 40 min using a one-step, linear gradient beginning with an aqueous 12% tetrahydrofuran (THF)-5% acetonitrile mixture and ending with 35% aqueous THF. Hesperidin and nariutin have been identified as the compounds that interfered with the ultraviolet (UV) determination of sinapic and caffeic acids. Fluorescence detection with wavelength programming offers optimal sensitivity and selectivity. Recoveries of 4-vinyl guaiacol and ferulic acid range from 90 to 103%. Detection limits are 1 ppm and 5 ppm for ferulic acid and 4-vinyl guaiacol, respectively. Other hydroxycinnamic acids such as coumaric, sinapic, and caffeic acids may also be determined from the same chromatogram.     

Energy-adjustedab initio pseudopotentials for the second and third row transition elements

Summary Nonrelativistic and quasirelativisticab initio pseudopotentials substituting the M^(Z–28)+-core orbitals of the second row transition elements and the M^(Z–60)+-core orbitals of the third row transition elements, respectively, and optimized (8s7p6d)/[6s5p3d]-GTO valence basis sets for use in molecular calculations have been generated. Additionally, corresponding spin-orbit operators have also been derived. Atomic excitation and ionization energies from numerical HF as well as from SCF pseudopotential calculations using the derived basis sets differ in most cases by less than 0.1 eV from corresponding numerical all-electron results. Spin-orbit splittings for lowlying states are in reasonable agreement with corresponding all-electron Dirac-Fock (DF) results.     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

Pyrazoles as molecular probes to study the properties of co-crystals by solid state NMR spectroscopy

Equimolar mixtures of 3,5-dimethylpyrazole (1) with four NH-imidazoles (2–5) have been studied by¹³C and ¹⁵N CPMAS NMR and by DSC. In three cases, the solid mixture behaves as the sum of the individual components [imidazole (2), 2-methylimidazole (3) and 2,4(5)-dimethylimidazole (5)]. In one case [4,5-dimethylimidazole (4)], the mixture corresponds to a new species in which the dynamic behavior of1 no longer exists.     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.