Exchange bias dependence on interface spin alignment in a Ni80Fe20/(Ni,Fe)O thin film

A Ni80Fe20/(Ni,Fe)O thin film exhibits a positive exchange bias when cooled in a zero field and a negative exchange bias when field cooled. With transmission electron microscopy and electron energy loss spectrometry, the composition and magnetic structure has been ascertained and a distribution of magnetization easy axes about the interface extrapolated. The results indicate that the positive exchange bias is from antiferromagnetic interface moments perpendicular to their ferromagnetic counterparts. With field cooling the alignment is put into a parallel configuration resulting in a negative exchange bias.     

Friction and forced convective heat transfer in a sintered porous channel with obstacle blocks

This work experimentally studies the flow characteristics and forced convective heat transfer in a sintered porous channel that filled with sintered copper beads of three average diameters ( 0.830, and 1.163 mm). The pressure drop and the local temperature measurements can be applied to figure out the distributions of the friction coefficient and the heat transfer coefficient. Three sintered porous channels differ in the arrangement of obstacle blocks. Model A has no obstacle. Models B and C have five obstacle blocks facing down and up, respectively, in a sintered porous channel. The range of experimental parameters, porosity, heat flux, and effect of forced convection are 0.370 ≤ ɛ ≤ 0.385, q=0.228, 0.872, 1.862 W/cm², and 200 ≤ Re _d ≤ 800. The permeability and inertia coefficient of each of the three sintered porous channels are analyzed. The results for Model A agree with those obtained by previous investigations in C _f distribution. The heat transfer of Model C exceeds that of Model A by approximately 20%. Finally, a series of empirical correlation equations were obtained for practical applications and engineering problems.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

Lanostane-type triterpenoids from Diospyros discolor

Four new lanostane-type triterpenes, 24-ethyl-3beta-methoxylanost-9(11)-en-25-ol (1), 3beta-methoxy-24-methylenelanost-9(11)-en-25-ol (2), 3beta-methoxy-25-methyl-24-methylenelanost-9(11)-en-21-ol (3) and 3beta-methoxy-24-methyllanosta-9(11),25-dien-24-ol (4) together with three known triterpenes, betulinaldehyde, betulinic acid methyl ester, and ursaldehyde have been isolated from the methanol extract of the twigs of Diospyros discolor. The structures of those new compounds were elucidated by spectroscopic methods.     

Choosing best alliance partners and allocating optimal alliance resources using the fuzzy multi-objective dummy programming model

Synergy effects are the motives to enter into strategic alliances; however due to lack of adequate preparation or planning, these alliances often fail. It is of no doubt that a successful strategic alliance depends on choosing the correct alliance partners and appropriate resource allocation. In this paper, the fuzzy multi-objective dummy programming model is proposed to overcome the above-mentioned problems. Two types of strategic alliances, joint ventures and mergers and acquisitions (M&A), are demonstrated to choose the best alliance partners and allocate the optimal alliance resources in a numerical example. Based on the results, our method can provide the optimal alliance cluster and satisfaction in strategic alliances.     

Modeling single-frequency laser-plasma acceleration usingparticle-in-cell simulations: the physics of beam breakup

We investigate electron acceleration from space-charge waves driven by single-frequency lasers using a fully explicit particle-in-cell (PIC) model. The two dimensional (2-D) simulations model ~100 fs pulses at densities near n=4×10¹⁹ cm^-3 for 1-μm lasers. The pulses are found to break up due to a combination of longitudinal and transverse bunching of the laser intensity via Raman forward scattering type instabilities. The ponderomotive force of these intensity modulations generates large amplitude plasma waves. Large numbers of self-trapped electrons and multiple Raman forward scattering satellites are observed. The relevance of these simulations to experiments is discussed     

A Public-Key Traitor Tracing Scheme with Revocation Using Dynamic Shares

We proposed a new public-key traitor tracing scheme with revocation capability using dynamic shares and entity revocation techniques. Our schemes traitor tracing and revocation programs cohere tightly. The size of the enabling block of our scheme is independent of the number of receivers. Each receiver holds one decryption key only. The distinct feature of our scheme is that when traitors are found, we can revoke their private keys (up to some threshold z) without updating the private keys of other receivers. In particular, no revocation messages are broadcast and all receivers do nothing. Previously proposed revocation schemes need update existing keys and entail large amount of broadcast messages. Our traitor tracing algorithm works in a black-box way. It is conceptually simple and fully k-resilient, that is, it can find all traitors if the number of them is k or less. The encryption algorithm of our scheme is semantically secure assuming that the decisional Diffie-Hellman problem is hard.AMS Classification: 11T71, 68P30