Optofluidic detection for cellular phenotyping

Quantitative analysis of the output of processes and molecular interactions within a single cell is highly critical to the advancement of accurate disease screening and personalized medicine. Optical detection is one of the most broadly adapted measurement methods in biological and clinical assays and serves cellular phenotyping. Recently, microfluidics has obtained increasing attention due to several advantages, such as small sample and reagent volumes, very high throughput, and accurate flow control in the spatial and temporal domains. Optofluidics, which is the attempt to integrate optics with microfluidics, shows great promise to enable on-chip phenotypic measurements with high precision, sensitivity, specificity, and simplicity. This paper reviews the most recent developments of optofluidic technologies for cellular phenotyping optical detection.     

Metal complexes of 2-aza-2-benzyl-5,10,15,20-tetraphenyl-21-carbaporphyrin: M(2-NCH2C6H5NCTPP) (M = Ni, Pd) and Mn(2-NCH2C6H5NCTPP)Br (NCTPP = N-confused 5,10,15,20-tetraphenyl porphyrinate)

The crystal structures of (2-aza-2-benzyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′,N″) nickel(II) methylene chloride solvate [Ni(2-NCH₂C₆H₅NCTPP); 4], (2-aza-2-benzyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′,N″) palladium(II) [Pd(2-NCH₂C₆H₅NCTPP); 5] and bromo(2-aza-2-benzyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′,N″) manganese(III) toluene solvate [Mn(2-NCH₂C₆H₅NCTPP)Br·C₆H₅CH₃; 3·C₆H₅CH₃] have been established. The coordination sphere around the Ni²⁺ ion in 4 (or Pd²⁺ ion in 5) is distorted square planar (DSP), whereas for Mn³⁺ in 3·C₆H₅CH₃, it is a square-based pyramid with the Br atom lying in the axial site. The g value of 11.34, measured from parallel polarization of the X-band EPR spectra at 4 K, is consistent with a high spin mononuclear manganese(III) centre (S = 2) in 3. The magnitude of the axial (D) zero-field splitting (ZFS) for the mononuclear Mn(III) centre in 3 was determined approximately to be 1.4 cm⁻¹ by paramagnetic susceptibility measurements and conventional EPR spectroscopy.     

Very accurate potential energy curve of the He2+ ion

A very accurate ground-state potential energy curve (PEC) of the He(2)(+) molecule is calculated with 1200 explicitly correlated Gaussian functions with shifted centers in the range between 0.9 and 100 a(0). The calculations include the adiabatic corrections determined for the (3)He(4)He(+), (3)He(2)(+), and (4)He(2)(+) isotopologues. The absolute accuracy of the PEC is better than 0.05 cm(-1) and that of the adiabatic corrections is around 0.01 cm(-1). The depths of the PECs augmented with the adiabatic corrections for the three isotopologues are: 19 956.708 cm(-1) for (4)He(2)(+), 19 957.054 cm(-1) for (3)He(4)He(+), and 19 957.401 cm(-1) for (3)He(2)(+). The rovibrational energies are also determined. For (3)He(4)He(+) the computed rovibrational transitions corresponding to the ν = 1-0 band differ from the experiment by less than 0.005 cm(-1). For the rovibrational transitions corresponding to the ν = 23-22 band the difference is around 0.012 cm(-1). Presently, this represents the best agreement between theory and experiment for He(2)(+).     

A rapid and simple HPLC-UV method for the determination of inhibition characteristics of farnesyl transferase inhibitors

Ras proteins play an important role in the development of cancer. Farnesyl transferase inhibitors (FTIs) block the first obligatory post-translational step for activation, prenylation, of Ras proteins. To find new potent FTIs, rapid enzyme activity assays are required to reduce FTI development time. Most assays to date are based on radioactive labelled substrates. We developed a new, in vitro, farnesyl transferase assay based on gradient chromatography coupled to UV detection. Unfarnesylated and farnesylated H-Ras proteins were resolved on a C18 wide-pore HPLC column and their concentrations were determined with use of a calibration curve of unfarnesylated H-Ras. The assay was used to investigate inhibition characteristics of FTIs. The IC50 values of the FTIs L778,123 and SCH66336 were 4.2 nm and 78 microm, respectively. This assay could support the screening and development of FTIs to obtain rapid insights into their inhibitory properties.     

Stable superhydrophobic polybenzoxazine surfaces over a wide pH range

In this study, we report on a simple two-step casting process designed to create a stable superhydrophobic surface. This method possesses the advantages of being both simple and inexpensive as well as utilizing non-fluorine-containing compounds. Most interestingly, we found that the as-prepared surface possesses superhydrophobic properties not only for pure water but also for corrosive water under both acidic and basic conditions. Furthermore, the superhydrophobic polybenzoxazine surfaces had excellent environmental stability with regard to both heating and organic solvent treatment in terms of the contact angle to water.     

Photooxidation of olefins under oxygen in platinum(II) complex-loaded mesoporous molecular sieves

Cyclometalated platinum(II) complex has been successfully incorporated into the (3-aminopropyl) triethoxysilane-modified channels of ordered mesoporous silica SBA-15 that has large pore hexagonal channels. Studies on the (1)O(2) generation conclusively demonstrates that the olefins in the nano-channels of SBA-15 can be enriched 8 times higher than those in the homogeneous solution as the diffusion quantum yield of singlet oxygen ((1)O(2)) is assumed to be unit. The platinum(II) complex loaded in the channel of SBA-15 is stable, and the photosensitized oxidation occurs efficiently. No obvious degradation and leaching of photosensitizers is observed even after 10 runs. Only a simple filtration is needed for the recycled use of the expensive noble metal catalysts. This versatile system is a good example of photochemical reactions occurring in the mesoporous silica molecular sieve. SBA-15 not only provides a support for the photosensitizer, but also acts as a nano-reactor to facilitate the photooxidation.     

First fluorescent sensor for fluoride based on 2-ureido-4[1H]-pyrimidinone quadruple hydrogen-bonded AADD supramolecular assembly

A simple, highly selective, neutral, fluorescent sensor for fluoride anions is reported. It is based on 2-ureido-4[1H]-pyrimidinone quadruple hydrogen-bonded AADD supramolecular assembly, and its assembling and disassembling processes are also able to respond to external stimuli reversibly.     

Numerical Solutions of Matrix Differential Models Using Higher-Order Matrix Splines

This paper deals with the construction of approximate solution of first-order matrix linear differential equations using higher-order matrix splines. An estimation of the approximation error, an algorithm for its implementation and some illustrative examples are included.     

Effects of amorphous poly(3‐hexylthiophene) on active‐layer structure and solar cells performance

A key challenge to the development of polymer‐based organic solar cells is the issue of long‐term stability, which is mainly caused by the unstable time‐dependent morphology of active layers. In this study, poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl C60‐butyric acid methyl ester (PCBM) blend is used as a model system to demonstrate that the long‐term stability of power conversion efficiency can be significantly improved by the addition of a small amount of amorphous regiorandom P3HT into semicrystalline regioregular one. The optical properties measured by UV–vis absorption and photoluminescence reveal that regiorandom P3HT can intimately mix with PCBM and prevent the segregation of PCBM. In addition, X‐ray scattering techniques were adopted to evidence the retardation of phase separation between P3HT and PCBM when regiorandom P3HT is added, which is further confirmed by optical microscopy that shows a reduction of large PCBM crystals after annealing at high temperature in the presence of regiorandom P3HT. The improvement of the long‐term stability is attributed to the capability of amorphous P3HT to be thermodynamically miscible with PCBM, which allows the active layer to form a more stable structure that evolves slower and hence decelerates the device decay. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 975–985     

A BODIPY analogue from the tautomerization of sodium 3-oxide BODIPY

The introduction of hydroxy group to the 3-or 5-position of 4,4-difluoro-4-bora-3a,4a-diazaindacene (BODIPY) results in unexpected tautomerization to BDPONa with interesting structural and photophysical properties. The core of BDPONa is an anion with sodium cation as counter-ion. BDPONa displays strong fluorescence in organic solvents.