Optical Polymer Having a High Refractive Index and High Abbe Number Prepared by Radical Polymerization Using 2,5-BiS(2-Thia-3-Butenyl)-1,4-Dithiane

Abstract

Novel poly(vinylsulfide)s were prepared by addition polymerization using 2,5-bis(2-thia-3-butenyl)-1,4-dithiane (TBD) with a radical initiator for an optical polymer having a high refractive index (n_D) and Abbe number (v). Homopolymerization of TBD (72.9% conversion) and copolymerization with acrylonitrile or acrylates having nonpolar groups (50.4–81.3% conversion according to the comonomers used) in a limited composition range yielded hard and transparent polymers suitable for application in optics. The methacrylates used yielded no polymeric product as a result of the copolymerization. The obtained polymers had T_g, n_D and v ranging between 41.0–124.0°C, 1.678–1.546 and 34.1–43.8, respectively, except that poly(TBD) did not exhibit T_g below 200°C, and it had the highest n_D Most of the polymers have higher n_D and v than those of other conventional optical polymers and moreover, their values are comparable to those of flint glasses. The copolymerizability of TBD and the group contribution to n_D and v are discussed based on the Q-e scheme and on the Lorentz-Lorenz equation, respectively. This work shows that TBD serves as a useful material for the preparation of polymers having high n_D and v along with a T_g of more than 100°C, and that the polymers thus obtained are promising optical materials.

     

Chirality Induction by Formation of Assembled Structures Based on Anion‐Responsive π‐Conjugated Molecules

Anion‐responsive π‐conjugated compounds having chiral alkyl chains were synthesized. Circular dichroism (CD) and circularly polarized luminescence (CPL) were observed in the solution‐state assemblies of the chiral anion receptors and those of their anion complexes as salts of a planar triazatriangulenium cation. The CD and CPL spectral patterns of the ion‐pair‐based assemblies were completely opposite to those of the anion‐free assemblies, and this suggests that anion binding and subsequent ion pairing change the chirality of the assembly modes.     

Leveraging Material Properties in Fluorescence Anion Sensor Arrays: A General Approach

As the demand for probes suitable for sensor development increases, investigation of approaches that utilize known successful receptors gains in general importance. This study describes a two‐prong approach that can be used as a guide to developing sensors from known receptors. First, the conversion of a simple receptor, calix[4]pyrrole, into a fluorescent probe to establish a ratiometric signal is described. Secondly, the sensors that employ an output from a single ratiometric calix[4]pyrrole probe are fabricated by using poly(ether‐urethane) hydrogel copolymers. These hydrogels are designed to absorb, internalize and transport aqueous electrolytes. A sensor array of ten different poly(ether‐urethane) matrices with varying comonomer proportions were doped with a single probe and were exposed to eight different anions: acetate, benzoate, fluoride, chloride, phosphate, pyrophosphate, hydrogen sulfide, and cyanide, eight urine samples and anti‐inflammatory drugs (NSAIDs). The poly(ether‐urethane) matrices comprise different proportions of anion‐binding urethane moieties and different hydrophilicity given by the ratio between ethylene glycol ether and butylene glycol ether. This diversity in the hydration behavior provides different environment polarity, in which the recognition and self‐assembly processes display enough diverse behavior to allow for unique response of the probe to the analytes. Furthermore, a single probe is shown to recognize eight different aqueous anions and eight urine samples when embedded in ten different polyurethanes in an array that displays 100 % classification accuracy. To demonstrate the potential of the concept for quantitative studies, an estimation of non‐steroidal anti‐inflammatory drugs ibuprofen and diclofenac in water and in saliva was performed. A limit of detection of 0.1 ppm and a dynamic range of 0.1–0.6 and 0.05–60 ppm was observed, respectively. Given the general difficulty of chemosensors to recognize aqueous anions, the fact that one probe recognizes eight different analytes attests to an enormous effect of the polymer environment on the recognition process. This method could be used to generate a variety of sensor arrays for various analyses including species that are difficult to recognize, such as small‐molecule‐ and inorganic anions.     

Chiral Photoresponsive Tetrathiazoles That Provide Snapshots of Folding States

Herein, we designed chiral photoresponsive tetra(2‐phenylthiazole)s, which induce a diastereoselective 6π‐electrocyclization reaction in a helically folded structure to freeze the conformational interconversions. The folding conformation with one helical turn of tetra(2‐phenylthiazole)s was supported by multiple intramolecular noncovalent interactions including vicinal S???N interheteroatom interactions and CH–π and π–π stacking interactions between nonadjacent units, as found in X‐ray crystal structures as well as quantum chemical calculations. The introduction of a chiral group at both ends of tetra(2‐phenylthiazole) dictates the preferential folding into a one‐handed helix conformation by the simultaneous operation of S???O and multiple CH–π interactions that involve the chiral end groups. Since the tetra(2‐phenylthiazole)s possess two equivalent photoreactive 6π‐electron systems and the folded conformation is suitable for photoinduced electrocyclization reaction, they undergo a photocyclization reaction in a stereoselective manner to memorize the chirality of the helix in a resulting diastereomeric closed form.     

2-Chloroanthraquinone-catalyzed aerobic photo-oxidative synthesis of diacylamines from benzylamides

In this Letter, we report the aerobic photo-oxidative synthesis of diacylamines from benzylamides in the presence of molecular oxygen and catalytic amounts of 2-chloroanthraquinones under visible light irradiation from a fluorescent lamp.     

Direct Synthesis of 1,4‐Diols from Alkenes by Iron‐Catalyzed Aerobic Hydration and C?H Hydroxylation

Various 1,4‐diols are easily accessible from alkenes through iron‐catalyzed aerobic hydration. The reaction system consists of a user‐friendly iron phthalocyanine complex, sodium borohydride, and molecular oxygen. Furthermore, the effect of additional ligands on the iron complex was examined for a model reaction. The second hydroxy group is installed by direct C(sp³) H oxygenation, which is based on a [1,5] hydrogen shift process of a transient alkoxy radical that is formed by formal hydration of the olefin.     

Multiple Reaction Pathways Operating in the Mechanism of Vinylogous Mannich‐Type Reaction Activated by a Water Molecule

A systematic search for reaction pathways for the vinylogous Mannich‐type reaction was performed by the artificial force induced reaction method. This reaction affords δ‐amino‐γ‐butenolide in one pot by mixing 2‐trimethylsiloxyfuran, imine, and water under solvent‐free conditions. Surprisingly, the search identified as many as five working pathways. Among them, two concertedly produce anti and syn isomers of the product. Another two give an intermediate, which is a regioisomer of the main product. This intermediate can undergo a retro‐Mannich reaction to give a pair of intermediates: an imine and 2‐furanol. The remaining pathway directly generates this intermediate pair. The imine and 2‐furanol easily react with each other to afford the product. Thus, all of these stepwise pathways finally converge to give the main product. The rate‐determining step of all five (two concerted and three stepwise) pathways have a common mechanism: concerted Si? O bond formation through the nucleophilic attack of a water molecule on the silicon atom followed by proton transfer from the water molecule to the imine. Therefore, these five pathways have comparable barriers and compete with each other.     

Labile Base-Stabilized Silyliumylidene Ions. Non-Metallic Species Capable of Activating Multiple Small Molecules

Several base-stabilized silyliumylidene ions ( 2 and 3 ) with different ligands were synthesized. Their behaviour appeared strongly dependent on the nature of ligand. Indeed, in contrast to the poorly reactive silyliumylidene ions 3 c,d stabilized by strongly donating ligands (DMAP, NHC), the silylene- and sulfide-supported one ( 2-H and 3 a ) exhibits higher reactivity toward various small molecules. Furthermore, their capability to successively activate multiple small molecules was clearly demonstrated by processes involving successive reactions with silane/formamide, CO₂ and H₂. Moreover, HBPin adduct of 3 a ( 8-C ) catalyzes the hydroboration of pyridine. Of particular interest, silylene-supported silyliumylidene complex 2-H is one of the rare species able to activate two H₂ molecules.