Isothermal differential scanning calorimetry on an exothermic phenomenon during thermal decomposition of hydromagnesite 4 MgCO3 · Mg(OH)2 · 4 H2O

An exothermic phenomenon and a simultaneous rapid evolution of a small amount of carbon dioxide at ?500°C during thermal decomposition of hydromagnesite 4 MgCO₃ · Mg(OH)₂ · 4 H₂O was studied by isothermal DSCTG in a carbon dioxide atmosphere. It was quantitatively confirmed that the exothermic phenomenon was due to crystallization of MgCO₃ from the amorphous phase and that the evolution of carbon dioxide was due to decomposition of the MgCO₃ by the heat of crystallization (?3.4 kcal mole^?1.     

Evaluation of homogeneity of binary blends of poly(3-hydroxybutyrate) and poly(L-lactic acid) studied by near infrared chemical imaging (NIRCI).

The homogeneity of blends of poly((R)-3-hydroxybutyrate) (PHB) and poly(L-lactic acid) (PLLA) was evaluated by the near infrared chemical imaging (NIRCI) technique. NIRCI can nondestructively investigate a sample over a wide field of view within a few minutes to acquire a large number of spatially resolved NIR spectral data. NIRCI may be combined with multivariate analysis not only for qualitative analysis but also for statistically based quantitative analysis. The score images derived from the partial least squares regression (PLSR) analysis directly show that PHB/PLLA blends are highly homogeneous. The standard deviations (STD) of the histograms, indicating the distribution of the score values, show small values for the blends. These results qualitatively and quantitatively show the high level of homogeneity of PHB/PLLA blends. The predictions of the spatially averaged concentrations of the blend components obtained from PLSR results show values similar to the actual contents for the blends. The small errors of the predictions are also explained by STD values.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.     

Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Isolation and Stereostructures of Dolastatin G and Nordolastatin G, Cytotoxic 35-Membered Cyclodepsipeptides from the Japanese Sea Hare Dolabella auricularia

A bioassay-directed fractionation of the cytotoxic constituents of the Japanese sea hare Dolabella auricularia resulted in the isolation of two 35-membered depsipeptides dolastatin G (1) and nordolastatin G (2), which showed cytotoxicity against HeLa S(3) cells with IC(50) values of 1.0 and 5.3 &mgr;g/mL, respectively. The gross structures of these substances were established by spectroscopic analysis including 2D NMR techniques. The absolute stereostructure of 1 was determined by chiral HPLC analysis of amino acid components obtained from acid hydrolysis of 1 and by the enantioselective syntheses of two degradation products arising from polyketide portions. Nordolastatin G (2) is a congener that has the same absolute stereochemistry as that of 1.     

Rapid oligosaccharide synthesis using a fluorous protective group

The Bfp-OH, a novel fluorous protecting reagent, was able to be easily prepared. The Bfp group was readily introduced to a carbohydrate, removed in high yield, and recyclable after cleavage. The use of the Bfp group made it possible to synthesize a pentasaccharide by minimal column chromatography purification. Each synthetic intermediate was able to be easily purified only by simple fluorous-organic solvent extraction and monitored by TLC, NMR, and MS.     

Rapid synthesis of oligosaccharide moieties of globotriaosylceramide using fluorous protective group

The use of the Bfp (bisfluorous chain type propanoyl) group as a fluorous protective group made it possible to rapidly synthesize galabiose and the Gb3 oligosaccharide derivatives by a simple fluorous-organic extraction purification. The fluorous oligosaccharide synthesis using the Bfp group is an excellent strategic alternative to solid phase oligosaccharide synthesis, and removes some of the disadvantages of the solid phase method.     

A highly regio- and stereoselective synthesis of internal olefins via an elimination of trimethylstannyl group

Internal reaction of secondary alkyltin(IV) compounds having thionium ion gave internal trans olefins with high yield and regio- and stereoselectivity via 1,5- or 1,6-transfer of a hydride β to the trialkylstannyl group.     

Alkenylation of thiophenes at the 2-position with magnesium alkylidene carbenoids

Treatment of magnesium alkylidene carbenoids, generated from 1-chlorovinyl p-tolyl sulfoxides with isopropylmagnesium chloride at −78 °C in toluene, with 2-lithiothiophenes gave 2-alkenylated thiophenes in good to high yields. The intermediate of this reaction was found to be an alkenylmagnesium, which could be trapped with iodoalkanes and ethyl chloroformate. This procedure offers a novel and efficient one-pot synthesis of thiophenes having a disubstituted or a trisubstituted olefin at the 2-position from thiophenes in good yields.