Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

Structure and mechanical properties of nylon 6.12 prepared by temperature slope crystallization. I. Crystallization of oriented spherulitic textures

Oriented spherulitic textures of a rod-shaped nylon 6.12 sample were crystallized by the temperature slope method. Crystallization conditions were compared by changing temperatures and growth rates. Three types of textures (negative spherulites, positive spherulites, and spherulitic aggregates) were observed by this method. The negative textures appeared when the growth rate was less than 0.1 mm/h. Crystalline orientation and mechanical properties of the textures were investigated by x-ray diffraction and micro-hardness measurements, respectively. The hydrogen-bonded (010) planes were perpendicular to the growth direction in the negative spherulite, while they were parallel to the growth direction in the positive spherulite. In the spherulitic aggregates, the b axis was parallel to the growth direction, while the (010) planes formed roughly an angle of 45° with the growth direction. Due to the orientation of the hydrogen-boned planes, the negative texture exhibited an anisotropy, with hardness values of 106 MPa and 137 Mpa when measured perpendicular or parallel to the growth direction, respectively.     

13C-NMR and Molecular Orbital Studies of Protonation to Formanilides

The effect of protonation to formanilides was studied by measurements of ¹³C-NMR chemical shifts in CDCl₃ and methanesulfonic acid. It was found that the ¹³C shift of the ring carbon, to which the amide group is attached, exhibits an upfield shift by the protonation, whereas the peaks of the rest of ring carbons and carbonyl carbon shift downfield. The protonation-induced shifts of the ring carbons were found to be roughly correlated with the differences of the total electron densities between formanilides and their monocations. From the comparison between the protonation-induced shifts and the differences of the total electron densities at the carbons, especially at the carbonyl carbon, it is suggested that N-protonation is partly involved, although O-protonation seems to be dominant.     

Structure of dichlorine monoxide as studied by microwave spectroscopy. Determination of equilibrium structure by a modified mass dependence method

The microwave spectra of four isotopic species of dichlorine monoxide (OCl₂) have been observed, and the rotational constants have been obtained. The r_m structure for each isotopic species has been determined by Watson's method. The equilibrium structure has been estimated by taking proper averages of r_m structures to be $\text{r}{}_{\mathrm{e}}\text{(OCl) = 1.69587(7)}\text{A}\text{?}$ and ∠_eClOCl = 110.886(6)°. The general applicability and the merit of the present method for estimating the equilibrium structure are pointed out.     

Optical Glucose Monitoring Based on Femtosecond Two-Color Pulse Interferometry

We demonstrate the potential of femtosecond two-color pulse interferometry for in vitro optical glucose monitoring, by dispersion of the group refractive index in a glucose solution sample with respect to a red-color light and a blue-color light. By comparison with femtosecond one-color pulse interferometry, the basic performance of the present system with regard to sensitivity, quantitativeness, and tolerance to surrounding disturbances, is evaluated. The resulting accuracy and precision of glucose determination are 77 and 118mg/dl for 10-mm-sample-thickness, respectively. This near-common-path configuration of the two-color pulse light provides good stability to fluctuations of sample temperature, which is important in clinical applications. Considering the performance of femtosecond two-color pulse interferometry as an optical glucose sensor, a suitable measurement site for in vivo optical glucose monitoring is discussed.     

Simultaneous observation of CO isotopomer absorption by broadband difference-frequency generation using a direct-bonded quasi-phase-matched LiNbO3 waveguide

Rovibration absorption lines both of 12CO and 13CO are observed simultaneously with the output of a 2 microm broadband difference frequency generated in a direct-bonded quasi-phase-matched LiNbO3 waveguide, which is a 50 mm device with a single quasi-phase-matching period that is operated at a constant temperature. The wavelength conversion efficiency and the difference-frequency generation bandwidth reach 100%/W and 100 nm, respectively. The idler output bandwidth in the 2 microm region is obtained by group-velocity matching or phase-mismatch minimization when a 0.94 microm pump laser diode and a 1.55 microm tunable signal source are used.     

Wetting mode transition of nanoliter scale water droplets during evaporation on superhydrophobic surfaces with random roughness structure

During evaporation, shape changes of nanoliter-scale (80-100 nL) water droplets were evaluated on two superhydrophobic surfaces with different random roughness (nm-coating, μm-coating). The square of the contact radius and the square of the droplet height decreased linearly with evaporation time. However, trend changes were observed at around 170 s (nm-coating) and around 150 s (μm-coating) suggesting a wetting mode transition. The calculated droplet radii for the wetting mode transition from the average roughness distance and the average roughness height of these surface structures were approximately equal to the experimental values at these trend changes. A certain level of correlation between the roughness size and droplet radius at the wetting mode transition was confirmed on surfaces with random roughness.     

Determination of peptide φ angles in solids by relayed anisotropy correlation NMR

A solid state NMR method is presented for determination of a backbone dihedral angle φ in peptides, being based on the previously reported method, relayed anisotropy correlation (RACO) NMR [Y. Ishii et al., Chem. Phys. Lett. 256 (1996) 133]. In the present method, the and the dipolar tensors in the system are two-dimensionally (2D) correlated via polarization transfer from to under magic angle spinning (MAS). This method was applied to N-acetyl , -valine, and the H–C–N–H dihedral angle was determined to be 154.0±1.4° or 206.0±1.4°, the former agreeing with the X-ray value of 154±5°.     

High Efficiency Electrically-Addressable Phase-Only Spatial Light Modulator

To realize a high efficiency electrically addressable phase-only modulator, we have coupled a liquid crystal display (LCD) to an optically addressed parallel-aligned nematic liquid crystal spatial light modulator (PAL-SLM) with a set of lenses. Phase modulation exceeding 3ϖ at 532 nm wavelength was obtained. We obtained linear transfer characteristics for phase modulation at various desired phase levels after calibration and adjustment of the transfer characteristics of the PAL-SLM and the LCD. Diffraction efficiency of 40% for binary phase grating and of 90% for 8-level blazed phase grating, which were very close to the simulation values, were observed. The power loss of the readout light was caused when passed through a half mirror, therefore, we examined a setup using an oblique readout light at the modulator. Very high diffraction efficiency was obtained from the setup by optimizing the polarization direction and optical path for this light, and the orientation of liquid crystals. Since the modulator can perform at better than 90% diffraction efficiency and at nearly 100% reflectivity, various high efficiency systems utilizing such modulators are expected.