M?ssbauer spectroscopic study on valence-detrapping and trapping of mixed-valence trinuclear iron(III, III, II) fluorine-substituted benzoate complexes

Magnetorheological (MR) fluids are new iron-based materials, whose applications include brakes, dampers, clutches, shock absorbers systems and polishing of optical surfaces (lens and mirrors). They are dependent on the size and shape of particles as the magnetic properties. Interested in the possibility of using iron-rich powders, commonly used in nondestructive testing, ranging in size from a few μm to about 200?μm and lower cost than those commercially used for MR fluids, a study of the structural and magnetic properties of iron-rich metallic particles by X-ray diffraction (XRD) and M?ssbauer spectroscopy (MS) at room temperature has been done. Powders, as received, were separated into particle sizes smaller than 20?μm (sample A) and in the range of 20–38?μm (sample B) because these are the sizes generally required for applications in MR fluids. The particles whose sizes exceed the above values were ground in a high energy planetary mill for 3?h, using different values of rotational speed/time: 200?rpm for one hour, a pause of 10?s, 140?rpm for one hour, pause 10?s and then 175?rpm during the last hour. These powders were sieved to obtain particles smaller than 20?μm (sample C). According XRD results, in all samples, only α-Fe (lattice parameter a = 2,867(2) ?) and Fe₂O₃ (lattice parameter a = 5,037(1) ? and c = 13,755(8) ?) were present. The M?ssbauer spectra were fitted with two sextets. The hyperfine parameters values allowed us to assign the highest relative area spectrum (sextet) corresponding to α-Fe and the second one to Fe₂O₃ in accord to the XRD results. Thus, the preparation method using mechanical milling for diminishing the size of the metallic particles allowed us to get particles with size and magnetic properties that could lead to potentially MR fluids applications.     

Application of Protonic Acid-Doped Silica Gels to Electric Double-Layer Capacitors

Silica gels doped with several protonic acids such as HClO₄, H₂SO₄ and H₃PO₄ have been prepared by the sol-gel method and totally solid electric double-layer capacitors have been successfully fabricated using the highly proton-conductive silica gels as an electrolyte and activated carbon powder (ACP) hybridized with the silica gels as a polarizable electrode. It was found that the addition of HClO₄, which had the highest value of acid dissociation constant among these three acids, most effectively increased the proton conductivity of the resultant acid-doped silica gels. Tablets of the HClO₄-doped silica gels exhibited conductivities as high as 10^–5–10^–2 S cm^–1 at room temperature in dry N₂ atmosphere. One of the capacitors fabricated using the protonic acid-doped silica gels had a capacitance of 44 F/(gram of total ACP in the capacitor), which was comparable to those of conventional capacitors using liquid electrolytes.     

Formation of cyclic organosilicon compounds via organopolysilyl anions starting from methoxymethyldisilanes. A mechanistic study

In the presence of a catalytic amount of sodium methoxide, sym-dimethoxytetramethyldisilane was converted into α,ω-dimethoxypermethylpolysilanes, MeO(SiMe₂)_nOMe where n ? 3, at room temperature. On the other hand, similar treatment of the disilane in THF solution gave cyclic polysilanes, (Me₂Si)_n where n = 5–7. Decomposition of the disilane in the presence of diphenylacetylene afforded a trisilacyclopentene derivative under similar conditions. This compound was obtained also by the reaction between α,ω-dimethoxypermethylpolysilanes and diphenylacetylene in the presence of sodium methoxide. These cyclic products most likely were formed via permethyl polysilyl anion intermediates derived from α,ω-dimethoxypermethylpolysilanes. Also, the formation of α,ω-dimethoxypermethylpolysilanes could be elucidated in terms of the mechanism involving the base-assisted, concerted nucleophilic substitution or stepwise substitution by silyl anions, rather than the successive dimethylsilylene (Me₂Si:) insertion reaction.     

Ring transformation of 6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine. IV (1). Reduction and reaction of 5a-acetyl-6a-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitriles with primary amines

The reaction of 5a-acetyl-6-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitrile ( 1a ) with benzylamine gave ethyl l-benzyl-5-cyano-8a,9-dihydro-2-methyl-1H-pyrrolo[3,4-e]-pyrazolo[1,5-a]pyrimidine-8a-carboxylate ( 2a ), in addition to 5-acetyl-3-benzylamino-1-(4-cyanopyrazol-3-yl)- 2-pyridone ( 3 ). Reaction of 1a with aniline gave ethyl 6-acetyl-8-anilino-3-cyano-7,8-dihydro-4H-pyrazolo-[1,5-a][1,3]diazepine-8-carboxylate ( 4 ), in addition to ethyl 3-cyano-7-methyl-6-pyrazolo[1,5-a]pyrimidine-acrylate ( 5 ). On the other hand, the same reactions of 1b with benzylamine or aniline gave 2b or 8b , respectively. Though catalytic hydrogenation of 1a over 5% palladium-carbon proceeded by ring fission of cyclopropane ring to give 9 , 1a (or 1b ) afforded 4,5-dihydro derivatives ( 13 or 15 ) by catalytic hydrogenation over platinum oxide. The reactivity of 5-methoxy-4,5,5a,6a-tetrahydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine ( 16 ), which are related analogs of 1a,b , is also described.     

Quantum yields and quantitative spectra of firefly bioluminescence with various bivalent metal ions

We measured quantitative spectra of firefly (Photinus pyralis) bioluminescence in the presence of Zn²⁺ and other bivalent metal ions to investigate the effects of these metal ions on luciferin‐luciferase reaction. We studied the dependence of the quantum yield and spectrum on quantity and kind of bivalent metal ions. Adding various amounts of Mg²⁺, Mn²⁺ and Ca²⁺ produced virtually no change in the quantum yields or the spectra of bioluminescence. In contrast, increasing amounts of ions such as Zn²⁺ and Cd²⁺ decreased quantum yields and changed the bioluminescence color from yellow‐green to red. Quantitative analysis showed that the sensitivities of the quantum yield and color to various metal ions were in the order of Hg²⁺>Zn²⁺, Cd²⁺>Ni²⁺, Co²⁺, Fe²⁺≫Mg²⁺, Mn²⁺, Ca²⁺. We propose that the changes in quantum yield and spectrum caused by the metal ions are due to their effect on luciferase that surrounds oxyluciferin during its radioactive decay. We also found that having more metal ions accelerated bioluminescence reactions. The sensitivity of the reaction rate had no correlation with those of the quantum yield and spectrum.     

Molecular structures of isobutene and 2,3-dimethyl-2-butene as studied by gas electron diffraction

The structures of isobutene and 2,3-dimethyl-2-butene have been studied by gas electron diffraction. For isobutene the rotational constants obtained by Laurie by microwave spectroscopy have also been taken into account. Leastsquares analyses have given the following r_g bond distances and valence angles (r_av for isobutene and r_α for dimethylbutene): for isobutene, r(CC) = 1.342±0.003 Å, r(C-C)= 1.508±0.002Å, r(C-H, methyl) = 1.119±0.007 Å, r(C-H, methylene) = 1.095±0.020 Å, ∠(C-CC) = 122.2±0.2°, ∠(H-C-H) = 107.9±0.8°, and ∠(C-C-H) 121.3±1.5°; for dimethylbutene, r(CC)= 1.353 ±0.004 Å, r(C-C) = 1.511±0.002 Å, r(C-H) = 1.118± 0.004 Å, ∠(C-CC)= 123.9±0.5°, and ∠(H-C-H)= 107.0±1.0°, where the uncertainties represent estimated limits of experimental error. The bond distances and valence angles in these molecules and in related molecules are compared with one another. The CC and C-C bond distances increase almost regularly with the number of methyl groups, and the C-C bonds in isobutene and dimethylbutene are shorter than those in acetaldehyde and acetone by about 0.01 Å. Systematic variations in the C-CC angles suggest the steric influence of methyl groups.     

Reactions of 1,2-dimethoxytetramethyldisilane with styrenes: Formation of a new type of silacyclopentanes having phenyl substituents on ring carbons

The reaction of 1,2-dimethoxytetramethyldisilane with styrene and α-methylstyrene in the presence of NaOMe catalyst in tetrahydrofuran (THF) gave the new silacyclopentanes 1,1-dimethyl-2,4-diphenyl-1-silacyclopentane (IIIa) and 1,1,2,4-tetramethyl-2,4-diphenyl-1-silacyclopentane (IIIb), respectively. These silacyclopentanes were found to exist as cis-trans mixtures. The use of sodium metal in place of NaOMe afforded similar results. Reactions of a polysilane mixture, MeO-(SiMe₂)_nOMe (n ≧ 3), with the styrenes also gave similar results. In some cases, polysilacycloalkanes such as 1,2,3-trisilacyclopentanes (IV) and 1,2,3,4-tetrasilacyclohexanes (V) were obtained as by-products. A mechanism for the formation of the silacyclopentanes and polysilacycloalkanes is presented. It was found that electron impact decomposition of silacyclopentanes IIIa and IIIb, trisilacycloalkane IV and tetrasilacycloalkane V gave molecular ions corresponding to the silacyclopropane, cyclotrisilane and cyclotetrasilane systems.     

Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone

A simple method has been described for the Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone (SBPBH). In aqueous solution, cobalt(II) reacts with SBPBH to form a yellow complex, which is not destroyed even by the addition of 3.8 M perchloric acid. The absorption maximum of the complex in 1.5 M perchloric acid medium was found to be 400 nm; the molar absorptivity was 2.17 × 10⁴ liters mol⁻¹ cm⁻¹. The proposed method is fairly selective and has been applied to the determination of cobalt in standard alloy steel samples.