Synthesis of ZrO<Subscript>2</Subscript> nanoparticles for liquid scintillators used in the detection of neutrinoless double beta decay

We synthesized liquid scintillators incorporating ZrO₂ nanoparticles for application in neutrinoless double beta decay experiments. ZrO₂ nanoparticles of less than 10 nm in size were synthesized with sub- and supercritical hydrothermal methods. The Zr concentrations in the liquid scintillators were determined to be up to 1.4 wt% with inductively coupled plasma analysis, and the liquid scintillators were transparent to scintillation. These results indicate that these methods are applicable for the preparation of liquid scintillators for neutrinoless double beta decay experiments.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Experimental study for adsorption and photocatalytic reaction of ethyl methylphosphonate molecule as organophosphorus compound adsorbed at surface of titanium dioxide under UV irradiation in ambient condition

The adsorption and photocatalytic degradation of Ethyl methylphosphonate (EMPA) on powdery TiO₂ film has experimentally investigated using attenuated total reflection-infrared Fourier transform spectroscopy (ATR-FTIR) in ambient condition. Characteristic IR frequency as P-O-C vibration mode as EtO was observed by EMPA adsorbed at the surface of TiO₂. By TiO₂ photocatalysis, the adsorbed EMPA was decomposed to methyl phosphonic acid and phosphoric acid. The increment of IR intensity of which is assigned to Ti–O-P-O-Ti of EMPA was accompanied with increasing the IR peak intensity assigned to MPA. About that, we suggest that the appearance of the Ti–O-P-O-Ti of EMPA by the TiO₂ photocatalysis is regarded as acceleration of the hydrolysis of EMPA by the surface OH groups of TiO₂. The plausible adsorption structure and the photocatalytic reaction mechanism of EMPA at the surface of TiO₂ photocatalyst were elucidated.

     

Regulation of Multicolor Fluorescence Changes Found in Donor-acceptor-type Mechanochromic Fluorescent Dyes

The regulation of multicolor fluorescence changes in mechanochromic fluorescence (MCF) remains a challenging task. Herein, we report the regulation of MCF using a donor-acceptor structure. Two crystal polymorphs, BTD-pCHO(O) and BTD-pCHO(R) produced by the introduction of formyl groups to an MCF dye, respond to a mechanical stimulus, allowing a three-color fluorescence change. Specifically, the orange-colored fluorescence of the metastable BTD-pCHO(O) polymorph changed to a deep-red color in the amorphous-like state to finally give a red color in the stable BTD-pCHO(R) polymorph. This change occurred by mechanical grinding followed by vapor fuming. The two different crystal packing patterns were selectively regulated by the electronic effect of the introduced functional groups. The two types of selectively formed crystals in BTD(F)-pCHO bearing fluorine atoms, and BTD(OMe)-pCHO bearing methoxy groups, respond to mechanical grinding, allowing for the regulation of multicolor MCL from a three-color change to two different types of two-color changes.     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

Senecicannabine,a new pyrrolizidine alkaloid from senecio cannabifolius

The structure of senecicannabine($\text{1}$), a new mcrocyclic pyrrolizidine alkaloid isolated from $\text{Senecio cannabifolius}$, has been established by chemical study and X-ray analysis.     

Chemistry of the neopolyoxins,pyrimidine and imidazoline nucleoside peptide antibiotics

New chitin synthetase inhibitors, neopolyoxins A, B, and C were isolated from the culture filtrate of Streptomyces cacaoi subsp. asoensis. Their absolute structures have been established on the basis of chemical and spectroscopic evidence. They are structural analogs of the polyoxins. As a nucleobase, neopolyoxin C possesses uracil, while neopolyoxins A and B contain the imidazoline moiety. A ring contraction reaction of pyrimidine nucleoside into imidazoline nucleoside played a key role in the structure determination of the nucleoside moiety. A similar transformation was suggested for the biosynthesis of neopolyoxins A and B.     

Anionic Sublattices in Halide Solid Electrolytes: A Case Study with the High-Pressure Phase of Li3ScCl6

The Li₃MX₆ compounds (M=Sc, Y, In; X=Cl, Br) are known as promising ionic conductors due to their compatibility with typical metal oxide cathode materials. In this study, we have successfully synthesized γ-Li₃ScCl₆ using high pressure for the first time in this family. Structural analysis revealed that the high-pressure polymorph crystallizes in the polar and chiral space group P6₃mc with hexagonal close-packing (hcp) of anions, unlike the ambient-pressure α-Li₃ScCl₆ and its spinel analog with cubic closed packing (ccp) of anions. Investigation of the known Li₃MX₆ family further revealed that the cation/anion radius ratio, r_M/r_X, is the factor that determines which anion sublattice is formed and that in γ-Li₃ScCl₆, the difference in compressibility between Sc and Cl exceeds the ccp r_M/r_X threshold under pressure, enabling the ccp-to-hcp conversion. Electrochemical tests of γ-Li₃ScCl₆ demonstrate improved electrochemical reduction stability. These findings open up new avenues and design principles for lithium solid electrolytes, enabling routes for materials exploration and tuning electrochemical stability without compositional changes or the use of coatings.     

Photorefractive effect in the relaxor ferroelectric material 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3

The photorefractive effect in a nominally undoped 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 single crystal is measured. We report what is, to our knowledge, the first observation of the photorefractive effect in Pb-based relaxor ferroelectric crystals. The crystal is grown by the flux solution method. Then it is cut into a 2 mm x 4 mm x 8 mm piece and electrically poled along the [111] direction. The coupling constant of the two-wave mixing is 17 cm(-1), and the normalized time constant under 1-W/cm(2) illumination is 12 s at a wave-length of 476 nm. The effective trap density is calculated as 5 x 10(16) cm(-3) from the Debye screening length under the assumption of Kukhtarev's band-transport model. The dominant carrier is identified to be holes from the direction of two-wave mixing energy transfer.     

High Efficiency Electrically-Addressable Phase-Only Spatial Light Modulator

To realize a high efficiency electrically addressable phase-only modulator, we have coupled a liquid crystal display (LCD) to an optically addressed parallel-aligned nematic liquid crystal spatial light modulator (PAL-SLM) with a set of lenses. Phase modulation exceeding 3ϖ at 532 nm wavelength was obtained. We obtained linear transfer characteristics for phase modulation at various desired phase levels after calibration and adjustment of the transfer characteristics of the PAL-SLM and the LCD. Diffraction efficiency of 40% for binary phase grating and of 90% for 8-level blazed phase grating, which were very close to the simulation values, were observed. The power loss of the readout light was caused when passed through a half mirror, therefore, we examined a setup using an oblique readout light at the modulator. Very high diffraction efficiency was obtained from the setup by optimizing the polarization direction and optical path for this light, and the orientation of liquid crystals. Since the modulator can perform at better than 90% diffraction efficiency and at nearly 100% reflectivity, various high efficiency systems utilizing such modulators are expected.