Lithiation of a Silyl Ether: Formation of an ortho‐Fries Hydroxyketone

A hydroxy‐directed alkylation of an N,N‐diethylarylamide using CIPE‐assisted α‐silyl carbanions (CIPE=complex‐induced proximity effect) has been developed using a simple reagent combination of LDA (lithium diisopropylamide) and chlorosilane. A study of the mechanism, and the application of the procedure to an anionic Snieckus–Fries rearrangement for a highly efficient synthesis of the potent phosphatidylinositol 3‐kinase (PI3K) inhibitor LY294002, are reported.     

High-speed monitoring of the crystallinity change in poly(lactic acid) during photodegradation by using a newly developed wide area NIR imaging system (Compovision)

We aimed to achieve wide area rapid monitoring of the crystallinity change in poly(lactic acid) (PLA) during photodegradation caused by ultraviolet (UV) light by using a newly developed near-infrared (NIR) camera (Compovison). Several kinds of PLA samples with different crystallinities and their blends with poly[(3)-(R)-hydroxybutyrate] were prepared. Their two-dimensional NIR spectra in the 1,000–2,350-nm region were measured by Compovision at a 5-min interval during photolysis. An intensity decrease of the band in the 1,900-1,925-nm region due to the second overtone of the C = O stretching vibration of PLA was observed during photolysis. This suggests that an anhydride carbonyl is produced during photolysis. The NIR image of the crystallinity change monitored by the band at 1,917 nm in the standard normal variate spectra clearly shows the inhomogeneity of crystal evolution. A logarithmic increase was observed for all identified areas in the PLA film; however, the time to reach the maximum crystallinity was slightly different according to the initial crystallinity of the sample. It is likely that the initial crystallinity of the sample influences the degradation speed more than the degradation amount. These imaging results have provided fundamental chemical insights into the photolytic process for PLA, and at the same time they have demonstrated that the two-dimensional spectral data obtained by Compovision are useful for process monitoring of polymers.     

Tween 20-stabilized gold nanoparticles combined with adenosine triphosphate-BODIPY conjugates for the fluorescence detection of adenosine with more than 1000-fold selectivity

This study describes the development of a simple, enzyme-free, label-free, sensitive, and selective system for detecting adenosine based on the use of Tween 20-stabilized gold nanoparticles (Tween 20-AuNPs) as an efficient fluorescence quencher for boron dipyrromethene-conjugated adenosine 5′-triphosphate (BODIPY-ATP) and as a recognition element for adenosine. BODIPY-ATP can interact with Tween 20-AuNPs through the coordination between the adenine group of BODIPY-ATP and Au atoms on the NP surface, thereby causing the fluorescence quenching of BODIPY-ATP through the nanometal surface energy transfer (NSET) effect. When adenosine attaches to the NP surface, the attached adenosine exhibits additional electrostatic attraction to BODIPY-ATP. As a result, the presence of adenosine enhances the efficiency of AuNPs in fluorescence quenching of BODIPY-ATP. The AuNP-induced fluorescence quenching of BODIPY-ATP progressively increased with an increase in the concentration of adenosine; the detection limit at a signal-to-noise ratio of 3 for adenosine was determined to be 60 nM. The selectivity of the proposed system was more than 1000-fold for adenosine over any adenosine analogs and other nucleotides. The proposed system combined with a phenylboronic acid-containing column was successfully applied to the determination of adenosine in urine.     

Recent trends in nanomaterial-based microanalytical systems for the speciation of trace elements: A critical review

Trace element speciation in biomedical and environmental science has gained increasing attention over the past decade as researchers have begun to realize its importance in toxicological studies. Several nanomaterials, including titanium dioxide nanoparticles (nano-TiO₂), carbon nanotubes (CNTs), and magnetic nanoparticles (MNPs), have been used as sorbents to separate and preconcentrate trace element species prior to detection through mass spectrometry or optical spectroscopy. Recently, these nanomaterial-based speciation techniques have been integrated with microfluidics to minimize sample and reagent consumption and simplify analyses. This review provides a critical look into the present state and recent applications of nanomaterial-based microanalytical systems in the speciation of trace elements. The adsorption and preconcentration efficiencies, sample volume requirements, and detection limits of these nanomaterial-based speciation techniques are detailed, and their applications in environmental and biological analyses are discussed. Current perspectives and future trends into the increasing use of nanomaterial-based microfluidic techniques for trace element speciation are highlighted.     

Characterization of Novel Aminobenzylcantharidinimides and Related Imides by Proton NMR Spectra and Their Effects on NO Induction

Various acidic anhydrides including cantharidin were converted into corresponding aminobenzylcantharidinimide 3a and analogous imides 3b～k (at the ortho, meta, and para positions) with 35%～87% yields by reacting with aminobenzylamines and triethylamine. The two methyl side chains of cantharidinimides 3ao , 3am , and 3ap, and related imides had more than two chiral centers; the lone pair of electrons of nitrogen displayed a different chemical shift and coupling constant in H‐NMR spectra when the amino group of benzylamine was in the ortho position. These cantharidinimides had parent aniline, pyridine, and naphthalene plane structures, and the primary amine nucleophilicity and basicity might reflect the inductive electron’s negative effect on chemical shifts. We prepared cantharidinimides by heating the reactants cantharidin 1a , aliphatic and aromatic acid anhydrides, primary benzylic amines, and aniline derivatives to ca. 200 °C with 3 mL of dry toluene, and 1～2 mL of triethylamine in high‐pressure sealed tubes (Buchi glasuster 0032) to produce cantharidinimides and their analogues in good yields. The para‐aminobenzylic imides showed greater inhibition of nitric oxide (NO) synthesis by NO synthase (NOS) than did ortho‐ and meta‐aminobenzylic imides. Compound 3fp , para‐aminobenzylic norbonane‐imide, had the most potent effect on inducible NOS among the tested compounds and showed 35% inhibition.     

Redox Communication within Multinuclear Iron–Sulfur Complexes Related to Electronic Interplay in the Active Site of [FeFe]Hydrogenase

The one‐electron oxidations of a Fe₂ complex lead to the formation of a persistent metal‐stabilized thiyl radical Fe₂ species, mixed‐valent Fe₄, and Fe₈ complexes. The unpaired spin in the Fe₂ radical species delocalizes over the Fe₂ and the aromatic dithiolate, mostly on the terminal sulfur. The subsequent dimerization of the singly oxidized Fe₂ to the Fe₄ retains the partial thiyl radical character. For an analogue with less steric hindrance, the π–π stacking interaction between the dithiolato aromatic rings induces generation of the Fe₈, in which process electronic structures of the species are modulated through reducing the thiyl radical to the thiolate. Electronic reorganization repeats when the Fe₈ is converted to Fe₄. Electronic interplay in the complexes decreases the energy gap of frontier MOs and buffers electronic impacts upon redox events. Easier accessible redox potentials and increased stability of the species are facilitated. The results demonstrate that electronic versatility of the benzenedithiolate exerts pronounced influences on electronic and coordination structure of the metal complexes.     

Ru(II) complexes of tetradentate ligands related to 2,9-di(pyrid-2'-yl)-1,10-phenanthroline

A series of 1,10-phenanthrolines were prepared having additional ligating substituents at the 2,9-positions. These substituents were either a 4-substituted pyrid-2-yl, quinolin-2-yl, 1,8-naphthyrid-2-yl, N-methyl imidazo-2-yl, or N-methyl benzimidazo-2-yl group. Additionally, 3,6-di-(pyrid-2'-yl)-dipyrido[3,2-a:2',3'-c]phenazine was prepared. All but two of these ligands coordinated Ru(II) in a tetradentate equatorial fashion with two 4-methylpyridines bound in the axial sites. An X-ray structure analysis of the diimidazoyl system indicates considerable distortion from square planar geometry in the equatorial plane. Previously reported variations in the axial ligand for such complexes appear to have a stronger effect on the electronic absorption and redox properties of the system than similar changes in the equatorial ligand. In the presence of excess Ce(IV) as a sacrificial oxidant at pH 1, all the systems examined catalyze the decomposition of water to generate oxygen. Turnover numbers are modest, ranging from 146 to 416.     

Unusual face-to-face pi-pi stacking interactions within an indigo-pillared M3(tpt)-based triangular metalloprism

A triangular metalloprism, [((CO)3Re(mu-2)Re(CO)3)3(mu3-1)2], self-assembled from Re2(CO)10, 2,4,6-tri-4-pyridyl-1,3,5-triazine (tpt, 1), and indigo (H2(2)), represents a fairly novel example of strong face-to-face pi-pi interactions between the central triazine rings of the tpt ligands that bow significantly inward distorting the prismatic structure.     

Wound Healing Attributes of Polyelectrolyte Multilayers Prepared with Multi‐l‐arginyl‐poly‐l‐aspartate Pairing with Hyaluronic Acid and γ‐Polyglutamic Acid

Biodegradable multi‐l ‐arginyl‐poly‐l ‐aspartate (MAPA), more commonly cyanophycin, prepared with recombinant Escherichia coli contains a polyaspartate backbone with lysine and arginine as side chains. Two assemblies of polyelectrolyte multilayers (PEMs) are fabricated at three different concentration ratios of insoluble MAPA (iMAPA) with hyaluronic acid (iMAPA/HA) and with γ‐polyglutamic acid (iMAPA/γ‐PGA), respectively, utilizing a layer‐by‐layer approach. Both films with iMAPA and its counterpart, HA or γ‐PGA, as the terminal layer are prepared to assess the effect on film roughness, cell growth, and cell migration. iMAPA incorporation is higher for a higher concentration of the anionic polymer due to better charge interaction. The iMAPA/HA films when compared to iMAPA/γ‐PGA multilayers show least roughness. The growth rates of L929 fibroblast cells on the PEMs are similar to those on glass substrate, with no supplementary effect of the terminal layer. However, the migration rates of L929 cells increase for all PEMs. γ‐PGA incorporated films impart 50% enhancement to the cell migration after 12 h of culture as compared to the untreated glass, and the smooth films containing HA display a maximum 82% improvement. The results present the use of iMAPA to construct a new layer‐by‐layer system of polyelectrolyte biopolymers with a potential application in wound dressing.