Thermodynamics of the dissociation of Bis H+ in seawater from 5 to 40°C

Electromotive-force measurements of cells without transference were used to determine the dissociation constant of the protonated form of the weak base 2-amino-2-methyl-1, 3-propanediol (Bis) in synthetic seawaters corresponding to salinities of 20, 35, and 45. Hydrogen electrodes and silver-silver chloride electrodes were used, together with standard potentials determined in an earlier investigation. The pK increases in linear fashion with the salinity (S) of the medium, for values of S from 0 to 45. The solvent effect is given by 8.802+0.00378S at 25°C with a mean deviation of 0.001. The medium effect of seawater on H° at 25°C is less than 200 cal-mol^–1 and less than 0.2 cal-^oK-mol^–1 on S°.     

Boron Subphthalocyanines and Silicon Phthalocyanines for Use as Active Materials in Organic Photovoltaics

Organic photovoltaics (OPVs) have experienced continued interest over the last 25 years as a viable technology for the generation of power. Phthalocyanines are among the oldest commercial dyes and have been utilized in some of the earliest examples of OPVs. In recent years, the use of boron subphthalocyanines (BsubPcs) and silicon phthalocyanines (SiPcs) has attracted a flurry of interest with some examples of fullerene‐free devices reaching power conversion efficiencies >8 %. Unlike other more common divalent phthalocyanines such as copper or zinc, BsubPcs and SiPcs contain additional axial groups that can easily be functionalized without significantly affecting the optoelectronic properties of the macrocycle. This handle facilitates our ability to tune the solid‐state arrangement and other physical characteristics such as solubility ultimately giving us the ability to improve the thin film processing and final device performance. This review covers recent studies on the development of BsubPcs and SiPcs for use as active materials in organic photovoltaics.     

Friction force microscopy of alkylphosphonic acid and carboxylic acids adsorbed on the native oxide of aluminum

Monolayers of alkylphosphonic acids (APA) and alkylcarboxylic acids (ACA) on magnetron-sputtered aluminum films have been investigated by friction force microscopy (FFM), contact angle measurement, and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS). Clear evidence has been provided from PM-IRRAS that friction coefficients, determined from FFM data, may be correlated directly with variations in adsorbate molecular structure. The friction coefficient increased with the length of the adsorbate molecule, but reached a limiting value when the alkyl chain of the adsorbate contained eight carbons in the case of APA or 12 carbons in the case of ACA. For a given alkyl chain length, APA monolayers yielded coefficients of friction that were similar to those of monolayers of alkylthiols of the same length, but smaller than those of ACA. These data indicate that APA monolayers are better ordered than ACA monolayers. These inferences were supported by PM-IRRAS data, which enabled the density of gauche defects to be estimated and correlated with variations in the coefficient of friction.     

PVCH-PE-PVCH三嵌段共聚物在超临界CO2中的熔融再结晶行为

本研究组在前期研究中发现, 改变溶剂的挥发速率可以调节体系中PE结晶和PVCH玻璃化之间的竞争, 进而调节PE结晶的受限程度. 超临界二氧化碳(scCO2)是一种非极性溶剂, 其对无定形聚合物(如PS)有很强的溶胀作用, 可显著降低聚合物的玻璃化转变温度, 提高原来被冻结的高分子链的活动能力. PVCH的分子结构与PS相似, 研究结果表明, scCO2对PVCH组分也有很强的溶胀能力, 导致PVCH的玻璃化转变温度降低, 从而可以改变PE嵌段的受限状态. 本文研究了PVCH-PE-PVCH在scCO2中的熔融再结晶行为.     

Dosimetry in sonochemistry: the use of aqueous terephthalate ion as a fluorescence monitor

The generation of HO radicals by acoustic cavitation in water was monitored by their reaction with terephthalic acid (TA) anion to produce fluorescent hydroxyterephthalate ions using a cleaning bath (38kHz) and a probe system (20, 40 and 60 kHz) as different sources of ultrasound. When using the ultrasonic bath as a source of energy for sonochemical studies, the shape of the reaction vessel is important. In the case of HO production from water (50 cm³), reaction in a conical flask (100 cm³) produces 2.75 times more radicals than a round-bottomed flask of the same capacity. The fluorescence yield (fluorescence intensity/ultrasound dosage) obtained using the conical flask and ultrasonic bath was similar to that for a probe operating at 40 kHz on the same volume of solution. For a probe system operating at 20, 40 and 60 kHz the greatest sonochemical efficiency was attained at the highest of these frequencies (60 kHz). For the probe system the fluorescence yield is directly proportional to power input and the concentration of TA. The fluorescence yield decreases as the temperature is increased.     

Optical Thin-Film Sensors for the Determination of Aqueous Halide Ions

Fourteen thin-film optical sensors in which halide-sensitive fluorophores are immobilized in a thin copolymer film (50 m, dry) have been developed and characterized. The sensor films use rhodamine, 6-methoxyquinoline, and harmane dyes which have been functionalized and bound to a hydrophilic copolymer. The sensor films are reversibly capable of determining aqueous bromide and iodide with 4 and 2% accuracy, respectively, at concentrations of around 10^–3 mol dm^–3, and are more sensitive than previous plastic sensor fabrications. The 90% response time to molar iodide is 30–60 s. A combination of sensor films allows the simultaneous determination of both I^– and Br^– in a mixed-halide solution. The interference of several ions, including pseudo-halides, on the sensor films has been studied.     

Regioselective,Asymmetric Formal Hydroamination of Unactivated Internal Alkenes

We report the regioselective and enantioselective formal hydroamination of unsymmetrical internal alkenes catalyzed by a copper catalyst ligated by DTBM‐SEGPHOS. The regioselectivity of the reaction is controlled by the electronic effects of ether, ester, and sulfonamide groups in the homoallylic position. The observed selectivity underscores the influence of inductive effects of remote substituents on the selectivity of catalytic processes occurring at hydrocarbyl groups, and the method provides direct access to various 1,3‐aminoalcohol derivatives with high enantioselectivity.