Absorption of amines on cation exchange resins

All the amines studied are absorbed in excess of the exchange capacity bysulfonated polystyrene resins from aqueous solutions; the absorption is greatest with benzylamine, whose molecular structure is the closest to that of the monomer of the resin. The absorption is greater, then less the crosslinking of the resin, and it is influenced by the electrostatic field of the resin cations. There is no excess absorption from solvents such as alcohols, acetic acid or dioxane. The absorption characteristics of amines are sufficiently different that separations by elution chromatography on cation exchange resins are possible. Two such separations have been demonstrated. For quantitative analytical use, however, it would be wise to use very fine mesh resins on account of the slowness of diffusion of large amine molecules within the resins.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Reagentless system for sulphite determination based on polyaniline

A new reagentless system for sulphite (or sulphur dioxide) determination is reported based on the use of an organic conducting polymer, polyaniline, and its absorbance variation at 550 nm, depending on the sulphite concentration. After chemical polymerisation of aniline a very thin film of polyaniline is obtained. Although the response is not fully reversible, each film can be used for at least 10 measurements for low analyte concentrations (up to 0.5 mg l⁻¹) and five measurements for higher sulphite concentrations. Moreover, the reproducibility, ease of preparation and low cost of the films, permit the use of a new disposable system for each measurement. When the change in absorbance at 550 nm was measured for 210 s (stabilisation time), the system showed a linear response, which ranged from 0.025 to 1.50 mg l⁻¹ of sulphite. A theory with regard to the reaction mechanism between the polyaniline films and sulphite is also proposed. The system was applied to sulphite determination in wine samples and the results were in agreement with those obtained by the Official Method of Analysis (iodometric titration).     

Synthesis and derivatization of ethynyl alpha,alpha-dibromomethyl ketones: formation of highly functionalized vinyl triflates

[reaction: see text] We describe the synthesis of alpha,alpha-dibromomethyl ynones (8) and their subsequent derivatization to vinyl acetates (10). These vinyl acetates feature a 1,1-dibromo-olefin moiety, which is readily exploited in palladium-catalyzed Sonogashira, Stille, and Suzuki cross-coupling reactions with alkynes, stannanes, and boronic acids, respectively. A novel one-pot process then directly converts the resulting vinyl acetates 11-13 to the vinyl triflate derivatives 14a-j.     

Cloud-point preconcentration of fulvic and humic acids

The cloud-point extraction technique was used for preconcentration of fulvic and humic acids. The effect of the acidity of solution, the equilibration temperature and time, the amount of added surfactant (Triton X-100) and the time of centrifugation on the recovery were examined. The recoveries of fulvic and humic acids achieved under optimised conditions were 82% and 96%, respectively.     

The use of sample additives in flame emission spectrometry

New kinds of sample additives were investigated to increase the efficiencies of desolvation and atomization in flame spectrometry. Hydrazine and nigrosin were chosen as chemical and dye additives, respectively; an enhancement in the flame-emission signal was obtained in both cases. With nigrosin, it was possible to eliminate completely the interference of phosphate on a calcium emission signal. The increase in the signal for both additives was believed initially to be due to the more rapid evaporation of droplets in the sample aerosol. Further evidence, however, suggested that enhanced vaporization is responsible for the observed signal increase. It is suggested that similar sample additives might be useful also in inductively-coupled plasma emission spectrometry.     

Effect of zirconium,calcium, and barium on corrosion-electrochemical behavior of aluminum

The effect of zirconium, calcium, and barium on corrosion-electrochemical properties of aluminum was studied. A positive effect of alloying aluminum by these metals was revealed.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 11, 2004, pp. 1815–1818.Original Russian Text Copyright © 2004 by Ganiev, Barotov, Inoyatov.     

Unusual regiochemistry in a beckmann-like rearrangement of camphor. α-Camphidone via methylene migration.

Reaction of camphor with hydroxylamine-O-sulfonic acid affords the nitrogen insertion product α-camphidone by migration of the methylene group rather than the bridgehead. Since Beckmann rearrangements of trigonal oximes afford bridgehead cleavage products with camphor, an alternative synchronous rearrangement of a tetrahedral intermediate is proposed for this Beckmann-like reaction.     

Eine verbesserte Auswertungsmethode für die Röntgenkleinwinkelstreuung von Hochpolymeren

Zusammenfassung Die theoretischen und experimentellen Bedingungen für eine verbesserte Auswertung der Röntgenkleinwinkelstreuung von Hochpolymeren werden untersucht. Es wird gezeigt, daß genaue Messungen des Intensitätsverlaufes bei größeren Winkeln die Trennung der Kleinwinkelstreuung in eine reine Grenzflächenstreuung und eine Komponente der Dichteschwankungen innerhalb der Phasen ermöglicht.Diese Trennung erhöht die Genauigkeit der Bestimmung der Invarianten und gestattet die Berechnung der mittleren Durchschußlänge der kristallinen und amorphen Bereiche.Ein Vergleich dieses Längenparameters mit der Langperiode führt bei Annahme einer Lamellenstruktur zu einer Aussage über die Unebenheit der Grenzflächen.Der Absolutwert der Dichtefluktuation innerhalb der Phasen stellt einen zusätzlichen Strukturparameter dar, der besonders stark vom Unordnungsgrad der amorphen Bereiche abhängt.Ein Vergleich der experimentellen Ergebnisse mit Intensitätsverteilungen im Kleinwinkelbereich, die sich aus der Theorie des Parakristalls ergeben, zeigt, daß es nicht möglich ist, diese Theorie mit den Resultaten der Messungen in Einklang zu bringen.

---

Summary The theoretical and experimental conditions for an improved method of evaluating the X-ray small-angle scattering of polymers are studied. It is shown that accurate measurements of the intensity distribution at wide angles makes it possible to decompose the small-angle scattering into a component due to the phase boundaries only and a component related to the density fluctuations within the phases.This separation increases the accuracy of the determination of the invariant and permits the calculation of the average length of segments of the crystalline and the amorphous regions.Assuming a lamellar structure, a comparison of this length parameter with the long period can be used to assess the planarity of the boundaries. The absolute value of the density fluctuations within the phases represents a supplementary structural parameter which is largely determined by the degree of disorder in the amorphous regions.A comparison of the experimental results with calculated intensity distributions in the small-angle region based on the theory of the paracrystal shows that it is impossible to bring this theory into agreement with the experimental results.

---

---

Vorgetragen auf der Arbeitssitzung des Fachausschusses Physik der Hochpolymeren in der Frühjahrstagung Berlin 1971 vom 9. bis 13. März des Regionalverbandes Physikalische Gesellschaft zu Berlin.

---

Wir danken Herrn Dr.H. Tompa für das Programm zur Berechnung der in Abb. 9 wiedergegebenen Interferenzfunktion, Herrn Prof. Dr.G. Rehage für die Polystyrolpräparate und HerrnJ. P. Pauwels, HerrnJ. Braibant und dem Personal unseres Rechenzentrums für die Mitarbeit.     

Emission studies of pyrene solutions

Emission spectra of pyrene in hexane have been obtained over a temperature range (from 130 to 260 K) that has not been explored before for concentrations ranging from 10^?4 mole/? to 2 × 10^?2 mole/?. A conventional and new approximation which does not depend on the experimental set-up response functions has been used for evaluating pyrene excimer association energy W_DM and other pyrene parameters. In both methods W_DM agrees quite satisfactorlly, at all concentrations used, with that reported in the literature and obtained by other techniques. However, both approximation fail to yield the right values of the rate parameters at concentrations ? 2 g/?. This set the upper limit of sample solubility to be at C = 2g/? for our range of temperature. Furthermore, the new approximation can probably be used at higher concentration (for higher range of temperature) and even may be used for other organic molecules. There was also no difference in the ratio of the excimer (I_D) to monomer (I_M) quantum yields when an intense laser beam was used as a source of excitation rather than a super-pressure Hg-lamp. This suggested that the concentrations we used might not be large enough. As a result, the laser beam would not create enough density of excited molecules to affect the ratio of I_D/I_M.