Rapid fermentation of beer using an immobilized yeast multistage bioreactor

The characteristics of yeast sulfite metabolism in a multistage bioreactor system for beer fermentation were investigated. No sulfite was produced in the continuous stirred-tank reactor (CSTR). However, large amounts were produced in the packed-bed reactor (PBR). Production of sulfite in the PBR seems to be inevitable when it is operated continuously. In order to control the sulfite level in the young beer, the yeast needs to be reactivated into the growth phase. One possible strategy to achieve this is to aerate and periodically remove yeast clogged in the reactor once every 6–7 months before the sulfite level exceeds a given concentration (e.g., 20 mg/L). It was confirmed that sulfite production is closely related to the growth condition of the yeast and is therefore important to consider in the control strategy for sulfite when using the immobilized yeast reactor for beer production.     

Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.     

Determination of traces of natural brassinosteroids as dansylaminophenylboronates by liquid chromatography with fluorimetric detection

A microanalytical method for the determination of traces of natural brassinosteroids as their dansylaminophenylboronates by liquid chromatography with fluorimetric detection is described. The boronates are easily prepared by the reaction of brassinosteroids with dansylaminophenylboronic acid (DABA), which was newly synthesized as a precolumn fluorogenic reagent for brassinosteroids. The potential of the method is demonstrated by the separation of a standard brassinosteroid mixture and the analysis of a biologically active fraction sample obtained from an extract of Zea mays L. pollen. The detection limit of the DABA derivative was found to be 25 pg for brassinolide, which is superior to that of the phenanthreneboronate derivative.     

Preparation and certification of JAC river water reference material for trace element analysis

 The Japan Society for Analytical Chemistry has recently issued a river water-certified reference material (CRM) for use in the ultratrace analysis of elements in fresh water. The river water CRM consists of a set of two (natural and spiked) 500-ml samples. The natural water is certified for Pb, Cr, As, Cu, Fe, Mn, Zn, B and Al at their sub-μg/l levels, while the spiked water is intended for use in the regulatory analysis of tap water and fresh water. Key words River water · Trace element analysis · Regulatory analysis · Reference materials     

Determination of optimal formulation for extrusion granulation by compression test of wet kneaded mass

The purpose of this study is to propose the application of a compression test to the determination of an optimal formulation for extrusion granulation. The electric current during extrusion was measured and the characteristics of the wet kneaded mass in the compression test were analyzed under various operating conditions, with different types of extruders and several formulations of kneaded mass. It was found that addition of a binder (HPC-L) to pharmaceutical powders lowered the load of a high-compressing type extruder, since the binder reduced the friction among the wet mass during extrusion. Also, the support stress was found to be proportional to the compression pressure without a binder, although an inflection point appeared on the support stress curve when a binder was present. This inflection point suggested large water retention of the wet kneaded mass, at which the medium of pressure was changed from a discontinuous solid powder to a continuous liquid, and large water retention contributed to the low friction of the wet mass. The friction of the wet kneaded mass and the aptitude of the formulation for extrusion were understood by using the compression test. The compression test is a very useful procedure at the first stage of a formulation study.     

Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.