Experimental study of heat and mass transfer from a horizontal cylinder in downward air-water mist flow with blockage effect

An experimental study was made on convective heat and mass transfer from a horizontal heated cylinder in a downward flow of air-water mist at a blockage ratio of 0.4. The measured local heat transfer coefficients agree fairly well with the authors' numerical solutions obtained previously for the front surface of a cylinder over the ranges mass flow ratio 0–4.5×10⁻², a temperature difference between the cylinder and air 10–43 K, gas Reynolds number (7.9–23)×10³, Rosin-Rammler size parameter 105–168 μm, and dispersion parameter 3.4–3.7. Heat transfer augmentation, two-pahse to single-phase of greater than 19 was attained at the forward stagnation point. For heat transfer in the rear part of the cylinder, an empirical formula is derived by taking into account the dimensionless governing variables, that is, coolant-feed and evaporation parameters.     

Coordination characteristics of trivalent lanthanides and actinides in molten hydrate salts of Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and CaCl<Subscript>2</Subscript>

Distribution behavior of Ce(III), Am(III), and Cm(III) between tri-n-butyl phosphate solution and molten calcium nitrate hydrate Ca(NO₃)₂·RH₂O or molten calcium chloride hydrate CaCl₂·RH₂O was studied radiochemically. In Ca(NO₃)₂·RH₂O systems, maximum separation factors of Ce and Cm to Am were observed to be 12 (Ce/Am) and 1.7 (Cm/Am). The distribution ratios of these elements increased with the decrease of water activity in the hydrates, and the extractabilities at the water deficient region was less sensitive compared to those at the water abundant region. This trend was similar to the coordination circumstance change observed in electronic absorption spectra of Nd(III) in the hydrates.     

PIFA-mediated oxidative cycloisomerization of 2-propargyl-1,3-dicarbonyl compounds: divergent synthesis of furfuryl alcohols and furfurals

PhI(OCOCF₃)₂ (PIFA) in the presence of trifluoroacetic acid (TFA) in CH₂Cl₂ efficiently promotes the oxidative cycloisomerization of 2-propargyl 1,3-dicarbonyl compounds to give 4,5-disubstituted furfuryl alcohols. PIFA in hexafluoroisopropanol (HFIP) or PIFA-BF₃·OEt₂ in CH₂Cl₂ bring about the direct formation of furfurals from 2-propargyl 1,3-dicarbonyl compounds. In a few cases, PhIO is suitable for the direct formation of furfurals.     

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.     

Effect of interfacial proteins on osteoblast-like cell adhesion to hydroxyapatite nanocrystals

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD-Δf plot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD-Δf plot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔD changes by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell-protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model.     

Near-infrared BODIPY dyes modulated with spirofluorene moieties

New structurally constrained BODIPY dyes having electron-donating substituents were synthesized. As the key compounds for the construction of the BODIPY dyes, 1′H-spiro-[fluorene-9,4′-indeno[1,2-b]pyrrole] (sp-FIP) derivatives with electron-donating groups, such as OMe and NMe₂ at its 6′-position, were prepared using palladium-catalyzed intramolecular direct C-H arylation of a pyrrole moiety. The resulting BODIPY dyes showed bathochromic shift in absorption and fluorescence spectra in comparison to the unsubstituted analogs. Furthermore, pH-dependent reversible spectrum changes of the BODIPY dye were observed with the addition of trifluoroacetic acid (TFA) and subsequent addition of i-Pr₂NEt.     

Saiyutones A-D: four new unusual biflavones from Desmos chinensis

Four new unusual biflavones, saiyutones A-D, were isolated from the leaves of Desmos chinensis together with 16 known compounds. Their structures were determined on the basis of UV, IR, NMR, and MS analysis, and by comparison of their spectroscopic data with those reported. Saiyutones A and B had a unique biflavone skeleton with a 3-6″ linkage through a methylene group. It was proposed that the formation of a cyclic hemiketal was the key step in the biosynthetic pathway of saiyutones C and D.     

Virtual screening for ligands of the insect molting hormone receptor

Insect growth is regulated by the orchestrated event of ecdysteroids and their receptor proteins. Agonists/antagonists of ecdysteroid receptor are predicted to disrupt normal growth, providing good candidates of new insecticides. A database of over 2 million compounds was subjected to a shape-based virtual screening cascade to identify novel nonsteroidal hits similar to the known EcR ligand ponasterone A. Testing revealed micromolar hits against two strains of insect cells. Docking experiments against EcR were used to support the predicted binding mode of these ligands based on their overlay to ponasterone A.     

Measurement of Returns to Scale and Damages to Scale for DEA-based operational and environmental assessment: How to manage desirable (good) and undesirable (bad) outputs?

Environmental assessment is increasingly important in preventing various types of pollutions. Data Envelopment Analysis (DEA) has been long used as an operational performance measure, but we have insufficiently explored the use of DEA for environmental assessment. This study explores a new use of DEA for the environmental assessment in which outputs are classified into desirable (good) and undesirable (bad) outputs. Such an output separation is important in the DEA-based environmental assessment. This study extends the use of DEA to the measurement of both Returns to Scale (RTS) for desirable outputs and Damages to Scale (DTS) for undesirable outputs. A Range-Adjusted Measure (RAM) is used as a DEA model for this study because the non-radial model can easily combine the two types of outputs in a unified treatment. All the mathematical features regarding the RAM-based RTS/DTS measurement are first discussed from the operational and environmental performance in a separate treatment. Then, this study combines the two performance measures as a unified measure. The RAM-based RTS/DTS is mathematically explored from the unified measure for operational and environmental performance.     

Self-assembling properties of (arylimido)vanadium(V) compounds

(Imido)vanadium(V) complexes have attracted much attention because of their potential applications as catalysts. Compared with oxo ligands, imido ligands can possess a substituent on the imido nitrogen so that the steric and electronic characters of the metal center are considered to be controlled by the properties of the nitrogen substituent. In such a sense, the design of the imido ligands is envisioned to be one of the key factors in the development of efficient catalysts. Furthermore, architectural control of transition metal-directed assembly to create organized nanostructures is of importance for advanced materials. This review highlights self-assembling properties of (arylimido)vanadium(V) compounds.