Thermoplastic polyurethanes containing 12-hydroxymethylabietanol

Thermoplastic polyurethane elastomers incorporating the resin acid-derived 12-hydroxymethylabietanol (12-HMA) were prepared, and some physical properties are reported. A polyester macroglycol was prepared from 12-HMA, adipic acid, and ethylene glycol. This macroglycol then was combined with either poly(tetramethylene adipate) glycol (PTAd) or poly(ethylene adipate) glycol (PEAd) and 1,4-butanediol to give a glycol blend of 300 average hydroxyl equivalent weight (OHE). The glycol mixture then was combined with diphenylmethane 4,4′-diisocyanate (MDI) (NCO/OH = 1.0) to give urethane polymers soluble in tetrahydrofuran. Polymers were prepared with 0, 5, 10, 15, 20, and 25%, by weight, 12-HMA with PTAd as the other macroglycol and with 0, 10, 15, and 20% 12-HMA with PEAd as the other macroglycol. At 15% 12-HMA, polymers were made from glycol mixtures having 275 and 350 average OHE to demonstrate the effect of changing the hard-segment concentration. The presence of 12-HMA is shown to have its maximum effect on tensile properties at 15–20% in the PTAd series and at 10% in the PEAd series. In general, this effect is an increase in tensile strength and modulus and a decrease in elongation when compared with a similar polymer without the 12-HMA.     

[C7H7] radicals studied by neutralization reionization mass spectrometry; the ortho-tolyl to benzyl radical rearrangement

The collision-induced dissociation characteristics of the benzyl, tropyl and tolyl cations which serve to identify these [C₇H₇]⁺ isomers (the m/z 74–77 relative abundances) were not preserved in their neutralization-reionization (NR) mass spectra. However, analyses of mixtures of the [C₇H₇]⁺ isomers made by comparison of NR mass spectra gave similar results to those obtained from collisional activation (CA) mass spectra. The radicals produced by electron transfer from Xe to tolyl cations were not observed to rearrange to benzyl radicals on the time-scale of the NR experiment, a result in conflict with other gas-phase studies.     

Significance of oligomerization reactions in the transesterification of dimethyl terephthalate with ethylene glycol

Experimental investigations dealing with and mathematical models proposed for the kinetics of the transesterification of dimethyl terephthalate with ethylene glycol were critically reviewed. The models were found to be inadequate, while the investigations were found to be entirely lacking in information about the significance of oligomerization reactions. The significance of these reactions was deduced to be negligible by carrying out an analysis of the kinetics of possible ester interchange and transesterification reactions by use of data on methanol reported in the reviewed literature. This analysis was made possible by the application of numerical quadrature routines in testing the assumed models by the integral method.     

Reference materials for marine science

Summary The second edition of the catalog of reference materials suited for use in marine science, originally compiled in 1986 for NOAA, IOC and UNEP, has been recently completed. The catalog lists more than 900 reference materials from thirteen producers and contains information about their proper use, sources, availability, and analyte concentrations. The reference material matrices include ashes, airborne particulate matter, gases, oils, rocks and sediments, sludges, tissues and waters. Reference materials used for the evaluation of instruments and the determination of sample physical properties are also included. Indices are available for elements, isotopes and organic compounds, as are cross references to CAS registry numbers, and alternate names and chemical structures of selected organic compounds.     

Substitution reactions of 4-methyldibenzothiophene

Succinoylation, acetylation and nitration of 4-methyldibenzothiophene yields 2-substituted products. Bromination however, gave 3-bromo-4-methyldibenzothiophene as the major product along with a small amount of the 2-isomer. The bromo-compounds were used to prepare related derivatives via lithium exchange. 4-Methyldibenzothiophene 5,5-dioxide was also shown to nitrate in the 3-position. The structures of the derivatives were determined by NMR analyses. An alternative synthesis of 4-methyldibenzothiophene is described.     

Acidities in cyclohexanediols enhanced by intramolecular hydrogen bonds

Equilibrium gas-phase acidities of the six isomeric cyclohexanediols were measured in a Fourier transform ion cyclotron resonance mass spectrometer. Although all six cyclohexanediols have the same functional groups and similar structures, the acidities vary over 11 kcal/mol. This large difference is due mostly to the balance between hydrogen bonding and geometric strain. To understand the origins of the acidity differences in more detail, the conformations and energetics of the cyclohexanediols were studied using density functional theory, which gave good agreement with the experimental acidities. Finally, methanol-methoxide and methanol-methanol interactions were used as a model for the hydrogen bonding.     

Development and validation of routine analysis methods for the determination of essential, nonessential, and toxic minor and trace elements in cereal and cereal flour samples by inductively coupled plasma-atomic emission spectrometry

Various digestion procedures were carefully investigated and accurately evaluated with respect to their effect on the analysis of cereals and cereal flours. Multielement methods were selected and well developed for the determination of essential (Cr, Cu, Fe, Mg, Mn, and Zn), nonessential (Ag, Al, Ba, Bi, In, and Ga), and toxic (Cd and Pb) minor and trace elements by inductively coupled plasma-atomic emission spectrometry. Only Ag could be determined, either with aqueous standard or standard addition calibration methods, while the standard addition methods were more accurate for the determination of other elements. The recoveries were mostly within the range of 84.1-113% for the expected values of all analytes with respect to certified reference material NIST SRM 1586a (rice flour). The results proved that, for cereals and cereal flours, the use of H2O2 for wet digestion and HNO3 for dry ashing were not necessary. Linear regression analysis and Student's paired t-test were applied to evaluate the significant differences between different procedures and type of samples.     

Lime,soda and selenium: An early example of chemical process automation

The automatic control of certain physical phenomena, such as temperature and speed of rotation, has long been commonplace. However, the means by which this form of control can be applied to a chemical process are not so obvious. A sensing system must be found to monitor the status of the particular chemical system.     

The arylation of nitroalkanes and nitronate salts with aryllead triacetates

Nitroalkanes and their nitronate salts undergo α-arylation in good yield when treated with an aryllead triacetate in dimethyl sulfoxide.     

The photochemical reactions of α,β,γ,δ -unsaturated diazo compounds at low temperature

The α,β:γ,δ-unsaturated tosylhydrazone lithium salts (4) undergo photolysis at ?60°C to give vinylcyclopropenes (10) and [l,2]diazeto[l,4-a] pyrroles (11) and/or (12). The formation of (11, X=H) establishes the intermediacy of (8, X=H) in the formation of the 3$\text{H}$-1,2-diazepine (9). The diazoalkene (5, X=Me) showed opposite electrocyclisation periselectivity to its thermal cyclisation and gave (11, X=Me) $\text{via}$ (8, X=Me), rather than the pyrazoles (2) and (3).