Enhanced indoor radon concentration by using radon-rich well water in a Japanese wooden house in Fukuoka, Japan

Summary Radon measurements were carried out in a Japanese wooden house built on granitic geology, where radon-rich well water is used. Atmospheric radon concentrations were measured over one year with passive integrated radon monitors. The monitors were distributed at several locations in the house and were replaced every two months. In order to confirm the diurnal variation and heterogeneous distribution of radon, short-term measurements were carried out accordingly. Radon, its decay products and terrestrial gamma-radiations were measured in this survey. From the long-term measurement, the radon concentration in the house ranged from 14 to 184 Bq^. m^-3with an arithmetic mean of 45 Bq^. m^-3. A radon concentration of 184 Bq^. m^-3was observed in the bathroom in spring (March-May) though the radon level was normal in the living room and bedroom. In order to characterize the house, similar measurements were conducted in several surrounding houses. There was a significant difference in radon concentration between the investigated houses. There was a spatial distribution of the radon concentration and the highest value was found in the bathroom. Radon and its decay products concentrations varied with time, which increased from midnight to morning whereas they decreased during daytime. Although the radon concentration in tap water was 1 Bq^. l^-1, a high level of 353 Bq^. l^-1was found in the well water.While well water was being used, the indoor radon concentration near the bathroom increased rapidly with a maximum value of 964 Bq^. m^-3. It is clear that the use of well water enhanced the radon level around the bathroom.     

Hydroxylation of ionized aromatics including carboxylic acid or amine using recombinant Streptomyces lividans cells expressing modified biphenyl dioxygenase genes

The bphA1(2072)A2A3A4 gene cluster codes for a shuffled biphenyl dioxygenase holoenzyme with broad substrate specificity. These bphA1(2072)A2A3A4 genes were expressed in the actinomycetes Streptomyces lividans using a thiostrepton-inducible promoter P_tipA. Biotransformation experiments of various aromatics including carboxylic acid or amine in their molecular structure, such as 1-naphthoic acid, 2-(1-naphthyl)acetic acid, diphenylamine, and 1-benzyl-4-piperidone, were performed using the recombinant S. lividans cells. These ionized aromatics were converted to the corresponding 1,2-dihydrodiol, mono- or tri-hydroxy forms in 48 h. The structure of the converted products was determined by their EI-MS, ¹H- and ¹³C NMR analysis, and several products were found to be novel compounds.     

Evaluation of homogeneity of binary blends of poly(3-hydroxybutyrate) and poly(L-lactic acid) studied by near infrared chemical imaging (NIRCI).

The homogeneity of blends of poly((R)-3-hydroxybutyrate) (PHB) and poly(L-lactic acid) (PLLA) was evaluated by the near infrared chemical imaging (NIRCI) technique. NIRCI can nondestructively investigate a sample over a wide field of view within a few minutes to acquire a large number of spatially resolved NIR spectral data. NIRCI may be combined with multivariate analysis not only for qualitative analysis but also for statistically based quantitative analysis. The score images derived from the partial least squares regression (PLSR) analysis directly show that PHB/PLLA blends are highly homogeneous. The standard deviations (STD) of the histograms, indicating the distribution of the score values, show small values for the blends. These results qualitatively and quantitatively show the high level of homogeneity of PHB/PLLA blends. The predictions of the spatially averaged concentrations of the blend components obtained from PLSR results show values similar to the actual contents for the blends. The small errors of the predictions are also explained by STD values.     

Metal-dependent regioselective oxidative coupling of 5,10,15-triarylporphyrins with DDQ-Sc(OTf)3 and formation of an oxo-quinoidal porphyrin

[reaction: see text] Regioselectivity of the oxidative coupling of 5,10,15-triarylporphyrin metal complexes with DDQ-Sc(OTf)(3) was dependent on the central metal and meso-aryl substituent. Oxo-quinoidal porphyrin was obtained from Ni(II) porphyrin under the same conditions.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

Silver nanoparticles dispersed within amphiphilic star-block copolymers as templates for plasmon band materials

Formation of silver nanoparticles has been developed based on a template technique. Amphiphilic star-block copolymers employed as single molecule template, utilizing the coordination of Ag⁺ ions with carboxyl groups in the core of the star-block copolymer. Silver nanoparticles have been prepared by the addition of chemical reductant, e.g., NaBH₄. The solution of the resultant nanosphere composites showed yellow due to the surface plasmon resonance. These composites were soluble in organic solvents, because hydrophobic corona of the star-block copolymer protected the fabricated silver nanoparticles from aggregation.     

Fullerenols revisited as stable radical anions

The first exhaustive purification and characterization of the much-studied "fullerenols", prepared by reaction of C(60) in toluene with an oxygenated, aqueous NaOH solution using tetrabutylammonium hydroxide as a phase transfer catalyst, has been performed. The resulting fullerenol is not simply polyhydroxylated C(60) but rather is a structurally and electronically complex C(60) radical anion with a molecular formula of Na(+)(n)[C(60)O(x)(OH)(y)](n)(-) (where n = 2-3, x = 7-9, and y = 12-15) for three different, but identical, preparations. Surprisingly, Na(+)-fullerenol is paramagnetic, exhibiting mu(B) values in aqueous solution of 1.9-2.1 B.M. at 0.5 T and 300 K and R(1) proton relaxivities of 0.55-0.77 mM(-1)s(-1) at 20 MHz and 40 degrees C, values both slightly higher than those expected for a pure S = 1/2 spin system. ESR studies (ESE-FS and 2D nutation) of frozen aqueous solutions at 1.5 and 5.0 K establish that Na(+)-fullerenol is mainly S = 1/2 with a minor, but significant, component of S = 1. Thus, this is the first report to characterize these widely studied, water-soluble fullerenols as stable radical anions. The stability of the S = 1/2 Na(+)-fullerenol radical is likely due to a highly derivatized C(60) surface that protects a cyclopentadienyl radical center on the fullerene.     

The crystal structures of α- and β-CdUO4

The structural parameters of α- and β-CdUO₄ crystals are determined by X-ray powder diffraction technique. α-CdUO₄ is rhombohedral and cell parameters are a = 6.233(3) Å and α = 36.12(5)°. β-CdUO₄ crystallizes in a C-centered orthorhombic cell with a = 7.023(4), b = 6.849(3), c = 3.514 (2) Å. The space groups are $\text{R}\text{3}\text{m}$ for α-CdUO₄ and Cmmm for β-CdUO₄. α-CdUO₄: 1U in (000), 1Cd in ($\text{1}\text{2}\text{1}\text{2}\text{1}\text{2}$), 2O(1) in ±(uuu), 2O(2) in ±(vvv); u = 0.113, v = 0.350, Z = 1. β-CdUO₄: 2U in ($\text{000;}\text{1}\text{2}\text{1}\text{2}\text{0}$), 2Cd in ($\text{1}\text{2}\text{0}\text{1}\text{2}\text{; 0}\text{1}\text{2}\text{,}\text{1}\text{2}$), 4O(1) in ($\text{0, ±y, 0;}\text{1}\text{2}\text{,}\text{1}\text{2}\text{±y, 0}$), 4O(2) in ($\text{±x, 0,}\text{1}\text{2}\text{;}\text{1}\text{2}\text{±x,}\text{1}\text{2}\text{,}\text{1}\text{2}$); x = 0.159, y = 0.278, Z = 2. β-CdUO₄ contains collinear uranyl UO²⁺₂ groups with a UO(1) distance of 1.91 Å, located either along or parallel to the c axis whereas the UO(1) bond length in α-CdUO₄ is 1.98 Å which is longer than the usual uranyl bond length.     

Rapid oligosaccharide synthesis using a fluorous protective group

The Bfp-OH, a novel fluorous protecting reagent, was able to be easily prepared. The Bfp group was readily introduced to a carbohydrate, removed in high yield, and recyclable after cleavage. The use of the Bfp group made it possible to synthesize a pentasaccharide by minimal column chromatography purification. Each synthetic intermediate was able to be easily purified only by simple fluorous-organic solvent extraction and monitored by TLC, NMR, and MS.     

Leaching behavior of metal-containing species in residual oils with different organic solvents

The leaching behavior of two different residual oils is investigated with 24 organic solvents including alkanes, aromatics, esters, ethers ketones, alcohols and nitrogen compounds. A 2-g portion of sample oil is shaken with 20 ml of the organic solvent. The leaching of the organic matrix of the oil is determined by weighing the dissolved organic matrix after removal of solvent. The leaching of vanadium, iron and nickel was determined by flame atomic absorption spectrophotometry after ashing of the dissolved fraction. The leaching of those metals depends strongly on the solvent used; for example, vanadine is almost completely leached into toluene, but only slightly into methanol. The leaching of iron is poor compared with that of vanadium or nickel. In most solvents, leaching of those metal-containing species is poorer than that of organic material. Exceptionally, N,N-dimethylformamide is more efficient in leaching vanadium species than organic material.