Distribution and behavior of long-lived radioiodine in soil

The concentration of¹²⁹I in soil in Japan was determined by neutron activation analysis. For the activation analysis, pre-irradiation chemical separation of the iodine was carried out by acid decomposition and distillation and post-irradiation treatment was performed by ion exchange and solvent extraction. The concentration of stable iodine and¹³⁷Cs were also determined and compared with the behavior of¹²⁹I in soil.Soil samples from Ibaraki, Fukui, Fukushima, and Nagasaki Prefectures were analyzed and¹²⁹I was detected in amounts ranging from 10^–7 to 10^–5 Bq/g soil in uncultivated surface soil. There are apparently small variations in the¹²⁹I concentrations in each of the regions analyzed.From depth profile studies in sandy soil, the iodide form of¹²⁹I was found to migrate downward at a relatively rapid rate while other species remain longer in the surface soil.     

Regulation of geometry around the ruthenium center of bis(2-pyridinecarboxylato) complexes by the nitrosyl moiety: syntheses, structures, and theoretical studies

cis-[Ru(NO)Cl(pyca)(2)] (pyca = 2-pyridinecarboxylato), in which the two pyridyl nitrogen atoms of the two pyca ligands coordinate at the trans position to each other and the two carboxylic oxygen atoms at the trans position to the nitrosyl ligand and the chloro ligand, respectively (type I shown as in Chart 1), reacted with NaOCH(3) to generate cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I). The geometry of this complex was confirmed to be the same as the starting complex by X-ray crystallography: C(13.5)H(13)N(3)O(6.5)Ru; monoclinic, P2(1)/n; a = 8.120(1), b = 16.650(1), c = 11.510(1) A; beta = 99.07(1) degrees; V = 1536.7(2) A(3); Z = 4. The cis-trans geometrical change reaction occurred in the reactions of cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I) in water and alcohol (ROH, R = CH(3), C(2)H(5)) to form [[trans-Ru(NO)(pyca)(2)](2)(H(3)O(2))](+) (type V) and trans-[Ru(NO)(OR)(pyca)(2)] (type V). The reactions of the trans-form complexes, trans-[Ru(NO)(H(2)O)(pyca)(2)](+) (type V) and trans-[Ru(NO)(OCH(3))(pyca)(2)] (type V), with Cl(-) in hydrochloric acid solution afforded the cis-form complex, cis-[Ru(NO)Cl(pyca)(2)] (type I). The favorable geometry of [Ru(NO)X(pyca)(2)](n)(+) depended on the nature of the coexisting ligand X. This conclusion was confirmed by theoretical, synthetic, and structural studies. The mono-pyca-containing nitrosylruthenium complex (C(2)H(5))(4)N[Ru(NO)Cl(3)(pyca)] was synthesized by the reaction of [Ru(NO)Cl(5)](2)(-) with Hpyca and characterized by X-ray structural analysis: C(14)H(24)N(3)O(3)Cl(3)Ru; triclinic, Ponemacr;, a = 7.631(1), b = 9.669(1), c = 13.627(1) A; alpha = 83.05(2), beta = 82.23(1), gamma = 81.94(1) degrees; V = 981.1(1) A(3); Z = 2. The type II complex of cis-[Ru(NO)Cl(pyca)(2)] was synthesized by the reaction of [Ru(NO)Cl(3)(pyca)](-) or [Ru(NO)Cl(5)](2)(-) with Hpyca and isolated by column chromatography. The structure was determined by X-ray structural analysis: C(12)H(8)N(3)O(5)ClRu; monoclinic, P2(1)/n; a = 10.010(1), b = 13.280(1), c = 11.335(1) A; beta = 113.45(1) degrees; V = 1382.4(2) A(3); Z = 4.     

New resveratrol oligomers in the stem bark of Vatica pauciflora

Five new resveratrol oligomers; pauciflorols A-C (1-3), isovaticanols B (6) and C (8), and three new oligostilbene glucosides; pauciflorosides A (11), B (13), C (14), were isolated from the stem bark of Vatica pauciflora (Dipterocarpaceae) together with known 17 resveratrol oligomers (4, 5, 7, 9, 10, 12 and 15-25) and bergenin (26). The structures of isolates were established on the basis of detailed spectroscopic analysis. The typical and characteristic spectral properties of some resveratrol oligomers were also discussed.     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Studies on orally active cephalosporin esters. III. Effect of the 3-substituent on the chemical stability of pivaloyloxymethyl esters in phosphate buffer solution

The effect of substituents at the C-3 position on the degradation kinetics of the pivaloyloxymethyl (POM) ester of delta 3 cephalosporin in phosphate buffer solution (pH 6-8) was investigated. In the degradation, the isomerization process to the delta 2 ester was the rate-determining step. In this study, the logarithm of the isomerization rate to the delta 2 ester (log k12) correlated with the carbon-13 nuclear magnetic resonance chemical shift difference value at C-3 and C-4 of the delta 3 ester (delta delta (4-3)). The energy level of the lowest unoccupied molecular orbital (LUMO) of the delta 3 esters also correlated with log k12. The electronic properties at the C-2 position had no effect on the isomerization reaction. On the other hand, the logarithm of the isomerization rate back to the delta 3 ester (log k21) correlated with the van der Waals volume (MV) of the 3-substituent. These results show that the substituent at the C-3 position influences mainly the electronic structure of the conjugated pi-bond system (C3 = C4 - C4 = O) and consequently affects the feasibility of isomerization to the delta 2 ester, i.e., the stability to degradation.     

Enantioselective acylation of 1,2- and 1,3-diols catalyzed by aminophosphinite derivatives of (1S,2R)-1-amino-2-indanol

A phosphinite derivative that can be easily prepared in two steps from commercially available aminoindanol was found to be an effective catalyst for enantioselective acylation of diols. For the asymmetric desymmetrization of meso-1,2-diols, the corresponding monoester was obtained in up to 95% ee from the reaction in the presence of 5 mol % catalyst.     

Characterization of flower-inducing compound in Lemna paucicostata exposed to drought stress

A flower-inducing compound, LDS1, was isolated from a free-floating aquatic plant, Lemna paucicostata. The chemical structure and the absolute stereochemistry of LDS1 were determined as (9R,13R,11E,15Z)-9,13-dihydroxy-10-oxooctadeca-11,15-dienoic acid for its most abundant diastereomer. LDS1 was enzymatically produced when the plant was exposed to drought stress, and induced flowering at a concentration of 10 nM.     

Water-soluble supramolecular porphyrin dimer: self-organization of mono(imidazolyl)-substituted Zn porphyrin to a special-pair type dimer in water

Tris(4-carboxylphenyl)-mono(N-methylimidazolyl)-substituted Zn porphyrin was synthesized as a precursor for a water-soluble supramolecular porphyrin dimer. The dimer formation was performed in a NaHCO₃ aq solution (pH 8.4) and phosphate buffer solutions (pH 7.4-9.0). The split Soret bands of Zn porphyrin observed in the absorption spectra clearly showed self-organization to a special-pair type slipped cofacial dimer via metal coordination of imidazole even in water.     

NMR Study of Vulcanized Rubber

It is shown that NMR-linewidth measurements are useful to obtain information about the cross-linkage density and the average distance between the cross-links in vulcanized rubber. Inhomogeneous structure of the rubber phase in carbon-filled rubber is evidenced and the thickness of the rubber layer on carbon is evaluated at 50 Å.     

CO2 laser drives extreme ultraviolet nano-lithography — second life of mature laser technology

It was shown both theoretically and experimentally that nanosecond order laser pulses at 10.6 micron wavelength were superior for driving the Sn plasma extreme ultraviolet (EUV) source for nano-lithography for the reasons of higher conversion efficiency, lower production of debris and higher average power levels obtainable in CO₂ media without serious problems of beam distortions and nonlinear effects occurring in competing solid-state lasers at high intensities. The renewed interest in such pulse format, wavelength, repetition rates in excess of 50 kHz and average power levels in excess of 18 kiloWatt has sparked new opportunities for a matured multi-kiloWatt CO₂ laser technology. The power demand of EUV source could be only satisfied by a Master-Oscillator-Power-Amplifier system configuration, leading to a development of a new type of hybrid pulsed CO₂ laser employing a whole spectrum of CO₂ technology, such as fast flow systems and diffusion-cooled planar waveguide lasers, and relatively recent quantum cascade lasers. In this paper we review briefly the history of relevant pulsed CO₂ laser technology and the requirements for multi-kiloWatt CO₂ laser, intended for the laser-produced plasma EUV source, and present our recent advances, such as novel solid-state seeded master oscillator and efficient multi-pass amplifiers built on planar waveguide CO₂ lasers.