Development of Highly Active Chiral Titanium Catalysts for the Enantioselective Addition of Various Organometallic Reagents to Aldehydes

The catalytic enantioselective carbonyl addition reaction has long attracted the interest of chemists because of its synthetic importance. Although many highly enantioselective reactions have been developed, with few exceptions the reactions are carried out at relatively high catalyst loadings, making them less practical for scale‐up applications. In addition, organometallic reagents employed as carbon nucleophiles have been limited to those with relatively low reactivity, such as diorganozincs and arylboronic acids. In an effort to enhance the practicality, a highly active and enantioselective chiral titanium catalyst system was recently developed in our laboratory, enabling the enantioselective carbonyl addition reaction to aldehydes using various organometallic reagents (RM; M = MgX, Li, BY₂, ZnX, AlMe₂) at lower catalyst loadings (≤5 mol %).

     

Azafullerene encapsulated single-walled carbon nanotubes with n-type electrical transport property

Electrical transport properties of C60 and C59N encapsulated single-walled carbon nanotubes (SWNTs) are investigated by fabricating them as the channels of field effect transistor (FET) devices at room temperature. Their measurements indicate that C60@SWNTs exhibit the enhanced p-type characteristics compared with the case of pristine SWNTs, whereas C59N@SWNTs show the n-type behavior. The novel transport properties of peapods can be explained by the charge-transfer effect, which can modify the electronic structure of SWNTs.     

Preparation of colloidal stable fluoroalkyl end‐capped oligomer/silver nanocomposites––application to the surface modification of traditional organic polymers with these nanocomposites

A variety of fluoroalkyl end‐capped oligomers/silver nanocomposites were prepared by the reactions of silver ions with poly(methylhydrosiloxane) in the presence of fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide cooligomer containing poly(dimethylsiloxane) segments in organic media such as toluene and 1,2‐ dichloroethane. These fluorinated oligomers/silver nanocomposites thus obtained were found to exhibit clear plasmon absorption bands around 420 nm related to the formation of silver nanoparticles. In particular, these composites could display narrow plasmon absorptions around 420 nm in toluene by the addition of trioctylamine (TOA). On the other hand, the corresponding non‐fluorinated N‐(1,1‐ dimethyl‐3‐oxobutyl)acrylamide oligomer was not able to afford such a plasmon absorption under similar conditions. These fluorinated oligomers/silver nanocomposites in organic media have been found to be stable for more than 10 days. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements showed that silver nanoparticles could be effectively encapsulated into fluorinated oligomeric aggregate cores to afford colloidal stable fluorinated oligomers/silver nanocomposites. Fluorinated oligomers/silver nanocomposites were also applied to the surface modification of traditional organic polymers such as polystyrene (PSt) and poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a higher surface antibacterial activity related to the silver nanoparticles on their surface. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation of a sulfoxide group and ammonium-salt bonded silica stationary phase for separation of polychlorinated biphenyls from mineral oils

In this study, a silica stationary phase modified with sulfoxide group and ammonium-salt was prepared for the separation of polychlorinated biphenyls (PCBs) from mineral oils, and its properties were investigated. Organic sulfide was attached to a diamino (primary and secondary amino) bonded silica surface by an amide bond, and the bonded sulfide groups were oxidized with periodate to afford sulfoxide groups bonded to the stationary phase. The secondary amino groups in the spacer chain were converted to ammonium-salt by the addition of hydrochloric acid. The sulfoxide group and ammonium-salt bonded stationary phase was tested for their suitability as adsorbent for SPE-type preparative short columns and for an analytical HPLC-type separation. The new stationary phase (1.2 mmol of sulfur bonded per gram) separated PCBs from mineral oils (paraffin-based transformer oils) more efficiently than previously reported stationary phases including sulfoxide group or ammonium-salt bonded ones. The quantitative chromatographic parameters for an aliphatic hydrocarbon (eicosane) and some PCB congeners also indicated strong retention of highly chlorinated biphenyls by the sulfoxide and ammonium-salt bonded silica compared with simple aminopropyl, sulfoxide group or ammonium-salt bonded ones. A cleanup procedure was established for simple determination of PCBs in mineral oil samples using sulfoxide group and ammonium-salt bonded silica packed column fractionation. The analytical method, combination of the cleanup procedure, and measurement with a GC-high resolution (magnetic sector) MS or a GC-quadrupole MS were validated using mineral oil certified reference materials.     

Carbocyclization reaction of omega-iodo- and 1,omega-diiodo-1-alkynes without the loss of iodine atoms through a carbenoid-chain process

Atom-economical carbocyclization reactions of omega-iodo-1-alkynes and 1,omega-diiodo-1-alkynes to give products with incorporation of iodine atoms is described. Cycloisomerization of 2-(2-propynyloxy)ethyl iodides is initiated by a catalytic amount of LDA to give 3-(iodomethylene)tetrahydrofurans in high yields. Upon treatment of with a catalytic amount of 1-hexynyllithium, 1,omega-diiodo-1-alkynes efficiently undergo cycloisomerization to give (diiodomethylene)cycloalkanes. The diiodomethylene products are also obtained by iodine atom-transfer-type cyclization of omega-iodo-1-alkynes, using 1-iodo-1-hexyne as an external iodine atom source. Bromine atom-transfer and proton-transfer cyclization proceed as well by employing 1-bromo-1-octyne and 1-octyne, respectively. These reactions are proposed to proceed through a carbenoid-chain process involving exo-cyclization of the lithium acetylide intermediates to give Li,I-alkylidene carbenoids. It is shown that the exo-cyclization proceeded stereospecifically through inversion of the stereochemistry at the electrophilic carbon.     

Escape Rates for Multidimensional Shift Self-similar Additive Sequences

First the relation between shift self-similar additive sequences and stationary sequences of Ornstein–Uhlenbeck type (OU type) on \(\mathbb {R}^d\) is shown, and then the rates of escape for shift self-similar additive sequences are discussed. As a corollary, fundamental problems on recurrence of stationary sequences of OU type are solved. Some applications to laws of the iterated logarithm for strictly stable Lévy processes on \(\mathbb {R}^d\) and independent Brownian motions are given.     

Lyconadins C and F, new Lycopodium alkaloids from Lycopodium complanatum

New Lycopodium alkaloids, lyconadins C (1) and F (2), were isolated from the club moss Lycopodium complanatum. Lyconadin C (1) is a new C₁₆N₂-type Lycopodium alkaloid possessing unique fused-tetracyclic ring system consisting of a cycloheptene ring fused to a decahydroquinoline and pyridone rings. Lyconadin F (2) possesses a primary amide moiety in its molecular, which is the first example of Lycopodium alkaloids. Biogenetically, lyconadins C (1) and F (2) might be related to lyconadins A (4) and B (5). The structures and relative stereochemistry of 1 and 2 were elucidated on the basis of spectroscopic data. The absolute stereochemistry of 2 was elucidated by chemical correlations with lyconadin B (5) through hemiaminal form of lyconadin F (3).     

Gas-phase spectroscopy of synephrine by laser desorption supersonic jet technique

In our previous work, we found that synephrine has six conformers in the gas phase, while adrenaline, which is a catecholamine and has the same side chain as synephrine, has been reported to have only two conformers. To determine the conformational geometries of synephrine, we measured resonance enhanced multiphoton ionization, ultraviolet-ultraviolet hole burning, and infrared dip spectra by utilizing the laser desorption supersonic jet technique. By comparing the observed infrared spectra with theoretical ones, we assigned geometries except for the orientations of the phenolic OH group. Comparison between the determined structures of synephrine and those of 2-methylaminno-1-phenylethanol, which has the same side chain as synephrine but no phenol OH group, leads to the conclusion that the phenolic OH group in synephrine does not affect the conformational flexibility of the side chain. In the case of adrenaline, which is expected to have 12 conformers if there are no interactions between the catecholic OH groups and the side chain, some interactions possibly exist between them because only two conformations are observed. By estimation of the dipole-dipole interaction energy between partial dipole moments of the catecholic OH groups and the side chain, it was concluded that the dipole-dipole interaction stabilizes specific conformers which are actually observed.     

Evaluation of the degree of mixing of combinations of dry syrup, powder, and fine granule products in consideration of particle size distribution using near infrared spectrometry

We used near infrared (NIR) spectroscopy to evaluate the degree of mixing of blended dry syrup (DS) products whose particle sizes are not specified in the Revised 16th Edition of the Japanese Pharmacopoeia, and also evaluated the degree of mixing when powder products or fine granule products were added to DS products. The data obtained were used to investigate the relationship between the particle size distributions of the products studied and the degree of mixing. We found that the particle size distribution characteristics of the 15 DS products studied can be broadly classified into 5 types. Combinations of frequently prescribed products were selected to represent 4 of the 5 particle size distribution types and were blended with a mortar and pestle. The coefficient of variation (CV) decreased as the percent mass of Asverin? Dry Syrup 2% (Asverin-DS) increased in blends of Periactin? Powder 1% (Periactin) and Asverin-DS, indicating an improved degree of mixing (uniformity). In contrast, in blends of Periactin and Mucodyne? DS 33.3%, mixing a combination at a 1:1 mass ratio 40 times resulted in a CV of 20%. Other mixing frequencies and mass ratios resulted in a CV by 50% to 70%, indicating a very poor degree of mixing (poor uniformity). These results suggest that when combining different DSs, or a DS with a powder or fine granule product, the blending obtained with a mortar and pestle improves as the particle size distributions of the components approach each other and as the ranges of the distributions narrow.