Characterization of heat-induced interaction of neutral liposome with lipid membrane of Streptomyces griseus cell

The interaction between the neutral 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) liposomes and cell membrane of Streptomyces griseus induced by the heat treatment at specific temperature was investigated, focusing on the internalization of the neutral POPC liposomes with S. griseus cells. In an attempt to clarify the modes of liposome internalization, various kinds of inhibitors of endocytotic pathways were used to treat S. griseus cells. The efficiency of the heat treatment on liposome–cell membrane interactions was finally characterized based on the hydrophobic, electrostatic interactions and hydration effect. In fact, the internalization of the neutral liposomes into these cells was found to show higher rate and greater amount at higher temperatures. The kinetic study showed that the maximum amount of the internalized liposomes was, respectively, 469 × 10⁵ and 643 × 10⁵ liposomes/cell at 37 and 41 °C. The internalization of the neutral liposomes induced by the heat treatment was characterized, implying that the endocytosis occurred. The interactions involving the internalization, adsorption, and fusion of these liposomes with S. griseus cells were mainly contributed by the hydrophobic interaction and the unstable hydrogen bonds caused by the loss of water of surface hydration of cell membrane rather than the electrostatic interaction under the specific heat condition.     

Mechanistic study on adsorptive removal of tert-butanethiol on Ag-Y zeolite under ambient conditions

The dynamics and surface chemistry of tert-butanethiol (TBT) adsorptive removal over silver-exchanged Y zeolite (Ag-Y) were studied under ambient conditions. Saturation uptake on Ag-Y was higher than that on H-Y and Na-Y. The structural analyses by a combination of X-ray diffraction, Ag K-edge X-ray absorption near-edge structure (XANES)/extended X-ray absorption fine structures (EXAFS), Ag L(III)-edge XANES, S K-edge XANES, and in situ UV-vis show that the AgSH molecule, Ag(2)S monomer, and Ag(4)S(2) cluster are the dominant silver species in TBT-saturated Ag-Y. Dynamic changes in adsorbed intermediates, gas-phase products, and the silver sulfides were followed by in situ FTIR, mass spectroscopy and in situ UV-vis, respectively. The results show the following reaction mechanism: (1) formation of iso-butene and adsorbed H(2)S on the Ag(+) site via C-S cleavage of hydrogen-bonded TBT initially adsorbed on the Ag(+) site; (2) conversion of the adsorbed H(2)S to AgSH and H(+) on zeolite; (3) the reaction of two Ag-SH species to yield Ag(2)S and H(+) on zeolite.     

Dissolution behavior of MgO-P2O5 glass system for vitrification of high-level radioactive waste

Journal of Radioanalytical and Nuclear Chemistry - The MgO-P2O5 glass system exhibits atypical behavior in the relationship between physical properties around the metaphosphate composition...     

Development of a new experimental system for monitoring biomembrane reactions: combination of laser spectroscopic techniques and biomembrane models formed at an oil/water interface.

We present a new experimental system to observe reactions in biomembranes by combining laser spectroscopic techniques with phospholipid monolayers formed at oil/water interfaces. The system can monitor reactions through changes in interfacial tension at oil/water interfaces induced by the reactions under non-destructive and non-contact conditions. In addition, oil/water interfaces with defined areas can define the composition of different kinds of phospholipids. Furthermore, the system allows using, as an oil phase, alkanes whose number of carbon atoms is close to the number of the alkyl chains of phospholipids in biomembranes (C > or = 16). We demonstrated the hydrolysis reaction in DPPC (dipalmitoyl phosphatidylcholine)/DPPS (dipalmitoyl phosphatidylserine)-mixed monolayers by phospholipase A2 by using the system.     

Polymerization behavior and gel properties of ethane,ethylene and acetylene-bridged polysilsesquioxanes

Soluble bridged polysilsesquioxanes with a range of molecular weight were synthesized from bis(triethoxysilyl)ethane, ethylene, and acetylene (BTES-E1, -E2, and -E3) via hydrolysis and polycondensation reaction by adjusting the water amount. Polymerization behavior of these three trialkoxysilanes was investigated by monitoring the reaction progress by GPC, and ²⁹Si NMR spectrometry of the resulting polymers, poly(BTES-E1), poly(BTES-E2), and poly(BTES-E3), showing that BTES-E1 generated cyclic oligomers at the early stage. In contrast, polymerization of BTES-E2 and BTES-E3 provided no detectable amounts of cyclic oligomers, but afforded linear polymers only. Bulk gels were also prepared by curing the polymers. The gel from poly(BTES-E3) exhibited high thermal stability derived from the rigid acetylene spacer with respect to thermogravimetric analysis. On the other hand, the polymer film of BTES-E1 showed the highest pencil hardness index among the polymers, indicating the tight siloxane network of poly(BTES-E1).     

Specific binding of GM1-binding peptides to high-density GM1 in lipid membranes

The ganglioside Galbeta1-3GalNAcbeta1-4(Neu5Acalpha2-3)Galbeta1-4Glcbeta1-1'Cer (GM1) is an important receptor. We have previously identified GM1-binding peptides based on affinity selection from a random peptide library. In the present study, we determined the amino acids essential for binding GM1 and investigated the specific interaction with GM1 in the lipid membrane. Arginines and aromatic amino acids in the consensus sequence (W/F)RxL(xP/Px)xFxx(Rx/xR)xP contributed to the ability of the peptides to bind GM1. The peptide p3, VWRLLAPPFSNRLLP, having the consensus sequence, showed high affinity for GM1 with a dissociation constant of 1.2 microM. Furthermore, the density-dependent binding of p3 was investigated using mixed monolayers of GM1 and Glcbeta1-1'Cer (GlcCer). p3 binds preferentially to high-density GM1, and its interaction with GM1 was found to be cooperative based on a Hill plot. These results indicated that a lateral assembly of GM1 molecules was required for the recognition of carbohydrates by p3. The GM1-binding peptide played a role as a unique anti-GM1 probe differing from the cholera toxin B subunit or antibodies.     

Influence of substrate surface roughness on light scattering of TiO2 optical thin films

Optical thin films are used in many optical elements; however, light scattering can be problematic. We investigate the effect of substrate surface roughness on the light scattering of optical thin films. The substrates are classified according to their surface roughness, from fine to very rough, and coated with a single TiO2 layer or a SiO2/TiO2 multilayer. The light scattering intensity increases as the substrate roughness increases. Scanning electron microscopy reveals that the number of nodules formed in the optical thin films increases with the substrate roughness, which affects the light scattering properties.     

Ionic conductivities of Nasicon-type glass-ceramic superionic conductors in the system Na2O–Y2O3–XO2–SiO2 (X = Ti,Ge, Te)

Glass-ceramics of the titanium-, germanium- or tellurium-containing Na₅RSi₄O₁₂-type (R = rare earth; Y) Na⁺-superionic conductors (N5YXS) were prepared by crystallization of glasses with the composition Na_3+3xY_1 ? xX_ySi_3 ? yO₉ (X = Ti; NYTiS, Ge; NYGeS, X = Te; NYTeS), and the effects of X elements on the separation of the phase and the microstructural effects on the conduction properties of glass-ceramics were discussed. The combination of x and y was most varied in N5YGeS and more limited in the order of N5YTeS > N5YTiS. Their conductivities and activation energies are of the order of 10^? 2 S/cm at 300 °C and of 15 to 24 kJ/mol, respectively. The conductivity of the glass-ceramic N5YXS decreases giving the order N5YGeS > N5YTeS > N5YTiS. It is considered that this order corresponds to the N5 single phase region. Large enhancement of electrical conductivity was observed in the glass-ceramics as the grain growth was promoted with increase of heating temperature and heating time for crystallization.     

Overdoped High Current Density Bi2-xPbxSr2CaCu2O8＋δ Intrinsic Josephson Junction Mesas and Their Switching Current Distributions

Small and thin mesa structures of intrinsic Josephson junctions 1- 2μm on a side and 1.5-7.5 nm in thickness are fabricated from single crystals of Bi2-xPbxSr2CaCu2O8＋δ with a nominal Pb content x from 0.2 to 0.5. The Josephson critical current density jc is found to be pronouncedly large, ranging from 10 to 50 kA/cm^2. Switching current probability measurements for these mesa samples show an indication of a crossover to the macroscopic quantum tunneling region.