Selective synthesis of poly(p‐oxybenzoyl) by fractional polycondensation: Enhancement of selectivity by shearing

The influence of shear flow, especially the timing for the application of shearing, was examined to enhance the selectivity for the preparation of poly(p‐oxybenzoyl) (Pp‐OB) by using hydrodynamically induced phase separation during polymerization of 4‐(4‐acetoxybenzoyloxy)benzoic acid (p‐ABAD) and m‐acetoxybenzoic acid (m‐ABA). The polymers containing few m‐oxybenzoyl (m‐OB) moieties were obtained as precipitates even at high content of m‐OB moiety in feed (χ_f) under shear flow. The content of m‐OB moiety in the precipitates (χ_p) prepared under shearing throughout the polymerization at the shear rate (γ) of 489 s^?1 was 6.3 mol % even at χ_f of 60 mol %. Especially, the Pp‐OB was obtained as the precipitates at χ_f of less than 50 mol %. The timing of the application of the shearing influenced the selectivity significantly, and the shearing just after the precipitation of the oligomers started was quite efficient to enhance the selectivity more. The χ_p of the precipitates prepared with shearing at γ of 489 s^?1 just after the precipitation was only 3.9 mol % even at χ_f of 60 mol %. The shear flow reduced the difference in the reactivity between p‐ABAD and m‐ABA, resulting in the decrease in the selectivity with regard to the formation of p‐oxybenzoyl homo‐oligomer. However, the shear flow enhanced the difference in the miscibility between homo‐oligomers and co‐oligomers. This change in the miscibility by shear flow brought about the more rapid precipitation of homo‐oligomers, leading to the enhancement of the selectivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

First direct visualization of spillover species emitted from pt nanoparticles

We studied the methanol adsorption behavior of Pt nanoparticles that were vacuum-deposited on a TiO(2)(110) surface at room temperature by using an ultrahigh vacuum (UHV) scanning tunneling microscope (STM). A large number of bright spots were observed on fivefold-coordinated Ti (Ti(5c)) rows of the TiO(2)(110) surface after exposure of the Pt/TiO(2)(110) to methanol vapor. We assigned the bright spots to methoxy species. These were mobile and were found to hop along the Ti(5c) rows. In situ time-resolved STM observations of the formation and migration of the bright spots on the Pt/TiO(2)(110) were carried out in the presence of methanol. The bright spots were produced at the periphery of the Pt nanoparticles and migrated to the substrate Ti(5c) rows. We discuss the spillover process and behavior of the methoxy species on the Pt/TiO(2)(110).     

Heterogeneous polycondensation for composition control of poly(p‐mercaptobenzoyl‐co‐p‐benzamide) by shearing

Composition control of aromatic poly(thioester‐amide) was examined by the reaction‐induced phase separation during polymerization of S‐acetyl‐4‐mercaptobenzoic acid (AMBA) and p‐acetylaminobenzoic acid (AABA) in aromatic solvent. The poly(thioester‐amide)s were obtained as precipitates and their yields became lower at the middle range of the content of AMBA in feed (χ_f). The contents of p‐mercaptobenzoyl (MB) moiety (χ_p) in the precipitates prepared without shearing were in good agreement with the χ_f values. In contrast to this, the χ_p values of the precipitates prepared at χ_f of 50–70 mol % under shearing were much lower than the χ_f values. The reaction rate of AMBA increased with shearing, whereas that of AABA was unchanged by shearing. This shearing effect on the reaction rates accelerated to form the homo‐oligomers. The solubility of MB oligomers enhanced by shearing, whereas that of p‐benzamide oligomers did not enhance owing to the strong interaction through hydrogen bonding. The MB oligomers were inhibited to be precipitated, resulting in the lower χ_p values than the χ_f values. The composition could be controlled by the application of the shearing to the heterogeneous polymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4301–4308     

Electrolytic reduction of Tc(VII) in nitric acid solution using glassy carbon electrode

Electroreduction of Tc(VII) was studied in nitric acid solution using glassy carbon electrode. The electroreduction was conducted at a constant potential –300 mV (vs. Ag/AgCl) with a potentiostat. It was found that the difference of the Tc concentration in the solutions before and after the electrolysis was negligibly small. This means that there were almost no TcO₂ or Tc deposited on the carbon fiber electrode during the electroreduction. Absorption spectra and distribution coefficients obtained by ion-exchange analysis indicated that Tc(VII) was reduced to Tc(IV).This work was financed by the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT) under the framework of The Development of Innovative Nuclear Technologies.     

Two-dimensional measurements of velocity using two rotating gratings

A two-dimensional vector velocimeter is proposed on the basis of the time-varying spatial filtering method using a rotating disk with two transmission gratings. The filtering characteristics of the spatial filter used in the velocimeter were studied theoretically. A preliminary experiment was performed to measure the velocity vector of a rotating random pattern. The experimental results show the usefulness of the present velocimeter for measurements of the velocity.     

Single-molecule force spectroscopy for studying kinetics of enzymatic dextran elongations

Catalytic elongation of dextran by a single molecule of dextransucrase (DSase) was directly monitored by observing the movements of the positions of a rupture peak, which represented the adhesive force between an isomaltoheptaose (dextran 7-mer)-immobilized probe and a DSase-immobilized mica surface. This was initiated with the addition of sucrose monomers. From the histograms of the rupture peaks after elongation reactions on each individual enzyme and the continuous peak shift of certain single enzymes, the catalytic elongation rate constant (k(cat)) was ascertained to be 1.2-2.7 s(-1).     

Comparison of luminescence ADP production assay and radiometric scintillation proximity assay for Cdc7 kinase

Several assay technologies have been successfully adapted and used in HTS to screen for protein kinase inhibitors; however, emerging comparative analysis studies report very low hit overlap between the different technologies, which challenges the working assumption that hit identification is not dependent on the assay method of choice. To help address this issue, we performed two screens on the cancer target, Cdc7-Dbf4 heterodimeric protein kinase, using a direct assay detection method measuring [(33)P]-phosphate incorporation into the substrate and an indirect method measuring residual ADP production using luminescence. We conducted the two screens under similar conditions, where in one, we measured [(33)P]-phosphate incorporation using scintillation proximity assay (SPA), and in the other, we detected luminescence signal of the ATP-dependent luciferase after regenerating ATP from residual ADP (LUM). Surprisingly, little or no correlation were observed between the positives identified by the two methods; at a threshold of 30% inhibition, 25 positives were identified in the LUM screen whereas the SPA screen only identified two positives, Tannic acid and Gentian violet, with Tannic acid being common to both. We tested 20 out of the 25 positive compounds in secondary confirmatory study and confirmed 12 compounds including Tannic acid as Cdc7-Dbf4 kinase inhibitors. Gentian violet, which was only positive in the SPA screen, inhibited luminescence detection and categorized as a false positive. This report demonstrates the strong impact in detection format on the success of a screening campaign and the importance of carefully designed confirmatory assays to eliminate those compounds that target the detection part of the assay.     

Prediction method for sound from passing vehicle transmitted through building façade

This study proposes a prediction method for assessing the sound of a passing vehicle that is transmitted through a glass plate, which employs the vibro-acoustic finite-difference time-domain (FDTD) method. The noise that is transmitted through the glass in a building façade, which is affected by the sound-insulation characteristics of its glass plates, can have a psychological influence such as a sleep disorder on the residents. In this study, a prediction method for the spectral characteristics of the transmitting sound through glass plates is proposed. The sound-insulation characteristics of glass plates are obtained using a vibro-acoustic FDTD method, and are then synthesized with the sound of passing vehicles obtained by in situ measurement. Firstly, the sound transmitted through several kinds of glass plates is simulated using the proposed method. Then, in order to confirm the validity of this method, the simulated results are compared to measured sounds transmitted by passing vehicles into a room near the street.     

Possible formation of antihydrogen atoms from metastable antiprotonic helium atoms and positrons/positroniums

The possible formation of antihydrogen atoms via the collision of metastable antiprotonic helium atoms with positrons and positroniums is discussed based on the known behavior of positrons in helium media.