Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

Aromatic polyesters obtained directly from hydroxybenzoic acids by hexachlorocyclotriphosphatriazene (PNC) in pyridine

Polyaryl esters of moderate molecular weights were prepared by the direct polycondensation reaction of hydroxybenzoic acids and its derivatives with hexachlorocyclotriphosphatriazene (also known as phosphonitrilic chloride trimer, PNC) as a condensing agent in pyridine. Copolymerization of p-hydroxybenzoic acid with several hydroxybenzic acid derivatives was carried out to improve the processability of the polymer of p-hydroxybenzoic acid, which yields fusible and soluble copolymers of high inherent viscosities. Polymer solubility and thermal behavior were examined.     

Two novel dicoumaro-p-menthanes from Gerbera piloselloides (L.) CASS

Two new type dicoumarins (dicoumaro-p-menthanes), named dibothrioclinins I (1) and II (2) were isolated from the roots and rhizomes of Gerbera piloselloides (L.) CASS., collected in Yunnan Province, China. Their structures were elucidated on the basis of MS, 1D ((1)H-NMR, (13)C-NMR, DEPT and NOE) and 2D ((1)H-(1)H COSY, HMQC, HMBC) NMR spectral analyses. The relative structures of the two compounds were established by NOE difference spectroscopy and further confirmed by single-crystal X-ray diffraction studies.     

Photo-induced graft copolymerization of methyl methacrylate on cellulose

Graft copolymerization initiated by ultraviolet light irradiation at 40°C in a hard glass vessel under nitrogen was examined. The graft copolymerization was observed to occur easily after some induction period without any use of photosensitizer, though it was found the per cent grafting and the grafting efficiency were markedly affected by the quantities of cellulose and monomer. In the system without cellulose, homopolymerization of methyl methacrylate hardly took place, but the use of cellulose caused the formation of homopolymer too, and a grafting efficiency in the range of 60–80% generally resulted. Ferric chloride or sodium anthraquinone-2,7-disulfonate (AQ) acted on the polymerization reaction as photosensitizers to reduce its induction period. Though ferric chloride acted to develop both the per cent grafting and the number of grafts, not the same effects were observed with AQ. Oxalic acid, which was employed with the object of eliminating very small amount of metals contained in cellulose, was found to act favorably in the formation of grafts, much like ferric chloride.     

Some aspects of plasma copolymerization of acetylene with N2 and/or water

Plasma polymerizations of mixture of acetylene-N₂, acetylene-H₂O, were investigated by using an electrodeless glow discharge from a 13.5-MHz radiofrequency source. Properties of plasma polymers were examined as functions of mole ratios of N₂ and/or H₂O to acetylene. The concentration of trapped free radicals and the internal stress in a plasma polymer decreased as the mole ratio of N₂ or H₂O increased. Water showed the most pronounced effects in those properties at the mole ratio of 0.3. Gas permeabilities increased by the copolymerization of N₂ and/or H₂O. Surface energies were also investigated by analysis of contact angles of liquids. Copolymerization of N₂ caused a remarkable increase in polar contribution of surface energy. Some fundamental aspects of flow-rate pressure relationship of mixed gases are presented.     

Preparation and properties of aromatic copolyamides from aromatic diisocyanates and aromatic dicarboxylic acids

Wholly aromatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation of an aromatic diisocyanate, 4,4′-methylenedi(phenyl isocyanate) or 2,4-tolylene diisocyanate, with a mixture of isophthalic acid and 4,4′-oxydibenzoic acid. Glass transition temperatures of the polyamides and copolyamides were between 229 and 273°C; this depended on the combination of diisocyanates and dicarboxylic acids used. These aromatic copolyamides showed better solubility in various organic solvents and reduced crystallinity, compared to the corresponding homopolyamides. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).     

Infrared spectroscopic study on the reaction mechanism of CO hydrogenation over Pd/CeO2

In situ infrared spectroscopy was applied to elucidate the reaction mechanism of CO hydrogenation over Pd/CeO₂. Instead of direct dissociation of CO, a new reaction pathway is proposed for methane formation, involving geminal dicarbonyl intermediates and (HCO)₂(a) intermediates, which may be located on the surface of Pd covered with thin layers of reduced ceria (SMSI effect). Transformation of methane formation sites into methanol formation ones by the oxidation with water vapor formed during the CO?H₂ reaction is proposed, which may be located on the Pd (111) planes adjacent to ceria support.     

Temperature and Oxygen Partial Pressure Dependences of the Surface Tension of Liquid Sn–Ag and Sn–Cu Lead-free Solder Alloys

Temperature dependence of the surface tension of liquid Sn–Ag and Sn–Cu base lead-free solder alloys and oxygen partial pressure dependence of liquid Sn–Ag alloy were evaluated using the experimental data obtained, respectively, by the constrained drop method and the sessile drop method in the previous studies [1, 2]. The temperature dependences of the surface tension have maximum positive values when the mol fraction of Ag and Cu is about 0.7, while those for pure liquid Sn, Ag, and Cu have negative values. The calculated values based on Butler’s equations were found to be in reasonable agreement with those of the experimental data. The oxygen partial pressure dependences of the surface tension of liquid Sn–Ag alloys at 1253 K have a minimum value when the mol fraction of Ag is about 0.9 and the oxygen partial pressure is less than about 10⁻¹³ atm. From this, it is considered that the oxygen adsorption increased by adding Ag to Sn when the mol fraction of Ag is less than 0.9.     

Photo-induced cellulose radicals capable of initiating graft copolymerization

The decay behavior of cellulose radicals produced by photo-irradiation at room temperature and the characteristics of photo-irradiated cellulose samples to initiate graft copolymerization of methyl methacrylate (MMA) were investigated. ESR spectra of such untreated, swollen, oximated, and ferric ion-sensitized samples irradiated at room temperature were constructed mainly of a single absorption line with a line width of 20 to 22 gauss and a g value of 2.003, and it is surely conceivable that the radicals showing a singlet spectrum should agree with those of alkoxy end produced at either the C₁ or C₄ position of the glucose unit by the scission of glucosidic bonds. The decay of radicals was accelerated by contact of various solvents with the samples, the activity decreasing in the order, water ≈ methanol ? acetone > dioxane. On the other hand, the decay of radicals by vinyl monomers became smaller in the order, methacrylic acid > MMA ≈ styrene. Graft copolymerization of MMA by a photo-irradiated sample was effectively initiated with the use of a certain amount of water or methanol, but not with acetone and dioxane. As no initiation can occur with the unirradiated sample, it is concluded that the initiation of graft copolymerization on the photo-irradiated sample is attributable to cellulose radicals showing a singlet spectrum which are formed in photo-irradiation at room temperature.