Hydration properties and compressive strength development of Low Heat Cement

For Low Heat Cement (LHC), its hydration reaction properties and compressive strength development were studied by quasi-elastic neutron scattering (QENS) and compressive strength test. In the QENS experiments, the amount of hydration products was estimated and the hydration behavior of LHC was revealed in the early hydration times of 7 days. Simultaneously, we compared the compressive strength of a mortar specimen made from LHC with the amount of hydration products. It was found that the compressive strength is strictly proportional to the amount of hydration products in the range from 15 h to 7 days of hydration.     

Simultaneous determination of a new gastrointestinal prokinetic agent (HSR-803) and its metabolites in human serum and urine by high-performance liquid chromatography using automated column-switching.

A method based on high-performance liquid chromatography using column-switching is described for the simultaneous determination of HSR-803 and its metabolites in human serum and urine. The system uses a six-port valve with a Nucleosil CN pre-column for on-line sample clean-up, and direct injection of samples. The limits of quantitation in serum and urine were 5 and 20 ng/ml for HSR-803 and 50 and 200 ng/ml for the metabolites, respectively. The coefficients of variation for the intra- and inter-day accuracies were between 0.8 and 7.1% for each compound. This method was applied to the pharmacokinetic studies in humans after oral administration of HSR-803.     

Cracking of Cellulose over Supported Metal Catalysts

Cellulose is cracked over supported Pt or Ru catalysts under hydrogenolysis conditions in water to give sorbitol as a main product. Among the catalysts tested, Pt/γ-Al₂O₃ gave the highest yield and selectivity, and this catalyst was recyclable in repeated runs. It is proposed that cellulose is hydrolyzed by in situ generated acid sites to form glucose, and glucose is immediately reduced to sorbitol over the metal catalyst.     

Wax components of larval cocoon silk of the hornet Vespa analis Fabricius

Wax, 85% of which consists of orthorhombic crystals, has been found in the cocoon of the hornet Vespa analis Fabricius by means of high-resolution ¹³C solid-state nuclear magnetic resonance (NMR). GC–MS analysis revealed the major components of the wax in the cocoon were linear alkenes and alkanes with a total of 23 or 34 carbon atoms. At 40.7 °C a DSC absorption peak and a ¹³C NMR chemical shift change were observed and interpreted as the result of a crystal transition from the orthorhombic to rotator phase of the wax molecules. At 55.5 °C melting of the wax was observed. The amount of crystalline wax deposition varied with the part of the cocoon—crystalline wax was concentrated in the silk sleeve lining the inner wall of each comb cell but there was very little in the silk cap projecting from the end of each cell. Because the wax components of the larval cocoon were almost identical to those of the larval cuticle, despite a slight difference in the profiles, they might have come from the larval cuticle via direct body contact with the cocoon. Figure Cocoon of the hornet Vespa analis Fabricius     

The role of pore size and structure on the thermal stability of gold nanoparticles within mesoporous silica

Highly dispersed gold particles (<2 nm) were synthesized within the pores of mesoporous silica with pore sizes ranging from 2.2 to 6.5 nm and different pore structures (2D-hexagonal, 3D-hexagonal, and cubic). The catalysts were reduced in flowing H2 at 200 degrees C and then used for CO oxidation at temperatures ranging from 25 to 400 degrees C. The objective of this study was to investigate the role of pore size and structure in controlling the thermal sintering of Au nanoparticles. Our study shows that sintering of Au particles is dependent on pore size, pore wall thickness (strength of pores), and pore connectivity. A combination of high-resolution TEM/STEM and SEM was used to measure the particle size distribution and to determine whether the Au particles were located within the pores or had migrated to the external silica surface.     

Transfer hydrogenation of cellulose to sugar alcohols over supported ruthenium catalysts

Ru/C catalysts are active for the conversion of cellulose using 2-propanol or H(2) of 0.8 MPa as sources of hydrogen, whereas the Ru/Al(2)O(3) catalyst is inactive in both reactions, indicating that the Ru/C catalysts are remarkably effective for the cellulose conversion.     

Combination of two fat saturation pulses improves detectability of glucose signals in carbon-13 MR spectroscopy

In order to improve the fat suppression performance of in vivo (13)C-MRS operating at 3.0 Tesla, a phantom model study was conducted using a combination of two fat suppression techniques; a set of pulses for frequency (chemical shift) selective suppression (CHESS), and spatial saturation (SAT). By optimizing the slab thickness for SAT and the irradiation bandwidth for CHESS, the signals of the -(13)CH(3) peak at 49 ppm and the -(13)CH(2)- peak at 26 ppm simulating fat components were suppressed to 5% and 19%, respectively. Combination of these two fat suppression pulses achieved a 53% increase of the height ratio of the glucose C1β peak compared with the sum of all other peaks, indicating better sensitivity for glucose signal detection. This method will be applicable for in vivo (13)C-MRS by additional adjustment with the in vivo relaxation times of the metabolites.     

The effect of task block arrangement on the detectability of activation in fMRI

The effect of task block arrangements on the detection of brain activation was investigated. Sessions of functional magnetic resonance imaging (fMRI) including the same number of two different task conditions but with different arrangements were compared. The two task conditions were, A) Ellipse-shaped black and white checkerboard flicker stimulation at 4.2 Hz covering the bilateral visual field, and B) the same flicker stimuli covering only the left visual field. In the rest blocks (0), the subjects looked at a fixation point. Four different task block arrangements were compared, 1) A0 (0A0A0A0) and B0 (0B0B0B0), 2) A0B0 (0A0B0A0B0A0B0), 3) AB0 (0AB0AB0AB0) and 4) AB (0ABABAB). Bilateral V1, V2, V3 and the left V5 were activated by condition A, and the right V1 and V2 by B. The activation in the left visual field by A0 was larger than in the other three conditions. In a differential analysis between conditions A and B, activation in the left V3 and V5 was declined by AB0 or AB. When rest blocks were located in the post-stimulus undershoot phase, the % signal change of the BOLD signal was emphasized, which caused augmented significance in the detection of the activity. It was indicated that the outcome of the activation map was influenced by the arrangement of task blocks, even though the same number of task blocks were repeated within the sessions. In fMRI studies, task conditions should be carefully compared within or across sessions considering the characteristics of hemodynamic response functions.     

Experimental study on air-liquid interface effect of Brownian dynamics using spectral-domain low-coherence dynamic light scattering

Space-variant dynamics of Brownian particles near an air-liquid interface is investigated by a one-shot analysis technique based on spectral-domain low-coherence dynamic light scattering. The expression “one shot” refers to the simultaneous and seamless measurement of temporal autocorrelation functions of the time-varying intensity depending on the scattering position without any scanning operation. It is experimentally confirmed that the Brownian motion is suppressed in a region close to an air-liquid interface, is activated by increasing the distance from the interface, and becomes freely diffusive far from the interface. This work is considered to be the first experimental confirmation of space-variant Brownian dynamics in the vicinity of an air-liquid interface.