Metal-binding ability of human prion protein fragment peptides analyzed by column switch HPLC

The structural conversion of the prion protein (PrP) from the normal cellular isoform (PrP(C)) to the posttranslationally modified form (PrP(Sc)) is thought to relate to Cu2? binding to histidine (H) residues. Traditionally, the binding of metals to PrP has been investigated by monitoring the conformational conversion using circular dichroism (CD). In this study, the metal-binding ability of 21 synthetic peptides representing regions of human PrP(C) was investigated by column switch high-performance liquid chromatography (CS-HPLC). The CS-HPLC system is composed of a metal chelate affinity column and an octadecylsilica (ODS) reversed-phase column that together enable the identification of metal-binding regardless of conformational conversion. Synthetic peptides were designed with respect to the position of H residues as well as the secondary structure of human PrP (hPrP). The ability of the octapeptide (PHGGGWGQ)-repeating region (OP-repeat) to bind metals was analyzed by CS-HPLC and supported by CD analysis, and indicated that CS-HPLC is a reliable and useful method for measuring peptide metal-binding. Peptides from the middle region of hPrP showed a high affinity for Cu2?, but binding to Zn2?, Ni2?, and Co2? was dependent on peptide length. C-Terminal peptides had a lower affinity for Cu2?, Zn2?, Ni2?, and Co2? than OP-repeat region peptides. Interestingly, hPrP193-230, which contained no H residues, also bound to Cu2?, Zn2?, Ni2?, and Co2?, indicating that this region is a novel metal-binding site in the C-terminal region of PrP(C). The CS-HPLC method described in this study is useful and convenient for assessing metal-binding affinity and characterizing metal-binding peptides or proteins.     

Control of Microphase Separation of Polystyrene-Silica Nanocomposites by Using Perhydropolysilazane and Partially Epoxidized Poly(styrene-block-butadiene-block-styrene)

In order to control microphase separation of polystyrene-silica nanocomposites, perhydropolysilazane (PHPS), which is a preceramic of silica, and epoxidized poly(styrene-block-butadiene-block-styrene) triblock copolymer [E-SBS, M_w = 8.0 × 10⁴, styrene: 40 mol%, degree of epoxidization of butadiene: 20 mol%] or poly(styrene-block-butadiene-block-styrene) triblock copolymer [SBS, M_w = 1.40 × 10⁵, styrene: 30 mol%] as templates of microphase separation were blended, following the calcination of composites in steam at 60°C. Well-arranged microphase separation was formed with E-SBS, though the macrophase separation was formed with SBS. The morphology of the microphase separation of the composites with E-SBS and PHPS was widely controlled by varying the PHPS content based on Molau's law. Silica domains were formed in polybutadiene domains. NMR analysis indicated the interaction between silanyl group of PHPS and epoxy group in E-SBS. The composites on the substrate were highly transparent and the surface of the composite with 73.5 vol% of silica was harder than 4H.     

Efficient Synthesis of a Regioregular Oligothiophene Photovoltaic Dye Molecule,MK‐2, and Related Compounds: A Cooperative Hypervalent Iodine and Metal‐Catalyzed Synthetic Route

We have successfully established an efficient route to the core structure of donor–acceptor head‐to‐tail (H–T)‐linked regioregular oligothiophenes, which includes the following key synthetic steps, that is, hypervalent iodine induced direct and regioselective coupling of thiophenes and the use of the obtained bithiophenes as excellent coupling substrates for the Suzuki and Stille couplings. The versatility of this new approach is highlighted in the dramatic improvement of the yield (ca. 59 % overall yield) of MK‐2, a high‐performance organic dye, for photovoltaic applications.     

One-pot esterification and amidation of phenolic acids

We developed a new one-pot reaction of phenolic acids to afford the corresponding esters and amides through acyl-protected and activated phenolic acid intermediates. The simultaneous protection/activation of phenolic acids with alkylchloroformates proceeded readily in the presence of DMAP at room temperature; subsequent addition of alcohols or amines afforded the corresponding esters or amides. The use of iso-butyloxycarbonyl as the protecting and activating group in the one-pot reactions afforded phenolic esters or amides in 91% average yield. As a practical example of this convenient synthesis, caffeic acid phenethyl ester (CAPE) was readily synthesized from commercially available caffeic acid and phenethyl alcohol in 95% yield, and an isotopomer of CAPE, [3,10-¹³C₂]CAPE, was synthesized in 91% yield from [3-¹³C]caffeic acid and 2-[1-¹³C]phenethyl alcohol. This method may be useful for the convenient esterification and amidation of diverse phenolic acids.     

Molecular Dynamics Study of Aqueous NaCl Solutions: Flash Crystallization Caused by Solution Phase Change

Solutions under sub- or supercritical conditions receive much attention because of their significance in geology and industrial applications. One of the most important properties is their very low salt solubility, which leads to rapid crystallization. The morphology of sodium chloride crystals formed in supercritical fluids has been shown to be affected by the presence of the high-concentration liquid phase and low-concentration vapor phase [Armellini and Tester, J. Supercritical Fluid 4, 254–264 (1991)]. However, because of the short time scales involved, experimental observation of the underlying mechanism is difficult. In the present study, microsecond-scale molecular dynamics, which provide insight with picosecond resolution, were conducted for the NaCl salt–solution interfacial system at sub- and super-critical conditions. We propose the utilization of the correlation between the number density of ions and water to parameterize the solution phase. This correlation and the two-dimensional number densities provide insight into flash crystallization at the atomic scale. Vapor–liquid phase coexistence was found at high pressure and the diffusive high-concentration liquid phase could transport sodium and chloride ions to form a compact solid phase. In contrast, an isolated crystal forms at low pressure owing to the rapid volume expansion of the vapor phase.     

Hydrophilic molecularly imprinted polymers for bisphenol A prepared in aqueous solution

We have prepared a hydrophilic molecularly imprinted polymer (MIP) for the hydrophobic compound bisphenol A (BPA) in aqueous solution using 3-acrylamido-N,N,N-trimethylpropan-1-aminium chloride (AMTC) as the functional monomer. Under redox-polymerization conditions, BPA forms an ion-pair with AMTC, which was confirmed by ¹H-NMR titration. The imprinting effect in aqueous solution was evaluated by comparison of this material with the corresponding non-imprinted polymer (NIP) and with a control polymer (CP) bearing no AMTC. The MIP showed the highest activity among the three polymers, and the imprinting factors as calculated from the amount of BPA bound to the MIP divided by the amounts bound to NIP and CP, respectively, are 1.8 and 6.0. The MIP was selective for BPA in aqueous solution, while structurally related compounds are not recognized. Such a selectivity for a hydrophobic compound is rarely observed in aqueous medium because non-specific binding of BPA inevitably leads to hydrophobic interaction.

Surface morphology of metal films deposited on mica at various temperatures observed by atomic force microscopy

Thin films of eight metals with a thickness of 150 nm were deposited on mica substrates by thermal evaporation at various temperatures in a high vacuum. The surface morphology of the metal films was observed by atomic force microscopy (AFM) and the images were characterized quantitatively by a roughness analysis and a bearing analysis (surface height analysis). The films of Au, Ag, Cu, and Al with the high melting points were prepared at homologous temperatures T/T_m = 0.22-0.32, 0.40, and 0.56. The films of In, Sn, Bi, and Pb with the low melting points were prepared at T/T_m = 0.55-0.70, where T and T_m are the absolute temperatures of the mica substrate and the melting point of the metal, respectively. The surface morphology of these metal films was studied based on a structure zone model. The film surfaces of Au, Ag, and Cu prepared at the low temperatures (T/T_m = 0.22-0.24) consist of small round grains with diameters of 30-60 nm and heights of 2-7 nm. The surface heights of these metal films distribute randomly around the surface height at 0 nm and the morphology is caused by self-shadowing during the deposition. The grain size becomes large due to surface diffusion of adatoms and the film surfaces have individual characteristic morphology and roughnesses as T increases. The surface of the Al film becomes very smooth as T increases and the atomically smooth surface is obtained at T/T_m = 0.56-0.67 (250-350 °C). On the other hand, the atomically smooth surface of the Au film is obtained at T/T_m = 0.56 (473 ± 3 °C). The films of In, Sn, Bi, and Pb prepared at T/T_m = 0.55-0.70 also show the individual characteristic surface morphology.     

Application of functional coatings by sol-gel method

Nippon Sheet Glass Co. has developed many sol-gel derived products during the last decade. In this paper, the history of the production development, the details of the products and the production process for automotive windows using sol-gel thin-film coatings are introduced. These sol-gel thin-film coatings include UV absorbing, hydrophobic, low reflective and solar control coatings.     

Bisphenol A analog-imprinted polymers prepared by an immobilized template on a modified silica microsphere matrix.

Bisphenol A (BPA)-recognizing imprinted polymers were synthesized using a template immobilized on silica where the template was grafted to aminopropyl silica. The silica-template conjugate was co-polymerized with a cross-linker (ethylene glycol dimethacrylate) and a functional monomer (4-vinylpyridine or methacrylic acid). The synthesized silica-polymer composites were treated with an aqueous NH4HF2 solution to dissolve the silica matrix. The 4-vinylpyridine-based imprinted polymer showed strong binding affinity to BPA and structurally related compounds having two hydroxyl groups at the 4,4'-position in the bisphenol structure.     

Efficient Coupling Reaction of Quinone Monoacetal with Phenols Leading to Phenol Biaryls

A simple and efficient synthesis of phenol biaryls by the cross‐couplings of quinone monoacetals (QMAs) and phenols is reported. The Brønsted acid catalytic system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol was found to be particularly efficient for this transformation. This reaction can be extended to the synthesis of various phenol biaryls, including sterically hindered biaryls, with yields ranging from 58 to 90 % under mild reaction conditions and in a highly regiospecific manner.