Development of a novel analytical method for determination of chondroitin sulfate using an in-capillary enzyme reaction

A novel analytical method for determination of total amount of chondroitin sulfate (CS) based on its conversion to desulfated chondro-disaccharide via an enzyme-catalyzed reaction, was developed. Using the in-capillary enzyme reaction, the method was also applied to the successful construction of an on-line analytical system. Within this system, electrophoretic migration was used to mix zones containing the enzyme mixture (chondroitinase ABC, chondro-4-sulfatase, chondro-6-sulfatase and 2-o-sulfatase) and the substrate (CS). The reaction was then allowed to proceed in the presence of a weak electric field and, finally, the product (desulfated chondro-disaccharide) of enzyme reaction migrated to the detector under the influence of an applied electric field. A polyvinyl alcohol-coated capillary was used to reduce protein adsorption. Desulfated chondro-disaccharide was successfully migrated toward the anode in 10 mM Tris-acetate buffer (pH 7.0) under reversed polarity and detected at 232 nm. The established method was validated and demonstrated to be applicable in the determination of total amount of CS in a commercial ophthalmic solution. No interference from the formulation excipients was observed. Good linearity was obtained, with correlation coefficients above 0.999. Recoveries and precisions ranged from 100.0 to 100.5%, and from 0.2 to 0.6% of the relative standard deviation, respectively. Good agreement was obtained between the established method and traditional photometric method based on carbazole reaction. In this study, application of the method to disaccharide compositional analysis was also performed.     

Intramolecular catalytic Friedel-Crafts reactions with allenyl cations for the synthesis of quinolines and their analogues

[reaction: see text] This paper describes a novel method to synthesize a quinoline backbone by incorporating allenyl cations into a catalytic intramolecular Friedel-Crafts reaction. The initial products were isomerized and aromatized upon treatment with acid and base, respectively, to give quinolines. The basic concept also proved to be promising for 1-benzazepine, 1-benzazocine, or isoquinoline synthesis.     

Bis(μ‐6‐hydroxy­picolinato)‐μ‐oxo‐bis­[di­pyridine­manganese(III)] monohydrate

The title compound, [Mn₂(μ‐O)(C₆H₃NO₃)₂(C₅H₅N)₄]·H₂O, was isolated from the reaction of 2,6‐pyridine­di­carboxylic acid with [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄] in pyridine. The dimanganese complex has twofold symmetry; the Mn^III atoms are bridged by one oxo and two amidate ligands and show compressed octahedral Jahn–Teller distortion. The molecular packing comprises a three‐dimensional structure constructed by means of extensive intermolecular interactions, including three kinds of hydrogen bonds and π–π interactions.     

The reaction of 1-silylcyclopropyl anions with dichloromethyl methyl ether: the efficient synthesis of cyclopropyl silyl ketones via cyclopropylidene derivatives

The reaction of 1-silylcyclopropyl anions with dichloromethyl methyl ether is described. The reaction with an excess amount of dichloromethyl methyl ether gives the corresponding cyclopropyl silyl ketones in low yields. On the other hand, the reaction under basic conditions proceeded smoothly to afford the corresponding cyclopropylidene derivatives, exclusively. The resulting cyclopropylidene compounds are subjected to hydrolysis or trapping with electrophiles easily to give the cyclopropyl silyl ketone derivatives in good yields.     

High-sensitive analysis of DNA fragments by capillary gel electrophoresis using transient isotachophoresis preconcentration and fluorescence detection

In this report aimed on further development of a high-sensitivity capillary gel electrophoresis (CGE) method for analysis of DNA fragments, we firstly explored online transient isotachophoresis (tITP) preconcentration combined with fluorescence detection (FD). The fluorescence signal (excitation: 488 nm; emission: 590 nm) was generated using the intercalating dye of ethidium bromide (EB). It was found when the leading electrolyte (LE) was injected behind the sample zone, such a special tITP mode has significant advantages to solve the bubble formation issue and to improve the analytical performance stability. Two standard DNA samples, a 50 bp DNA step ladder and the φX174/HaeIII digest, were used to evaluate the qualitative and quantitative abilities of the tITP-FD approach. A highly diluted sample (10,000-fold in the water, e.g. the φX174/HaeIII digest diluted from 500 μg/ml to the 50 ng/ml level) was enriched and detected; the LOD was down to 0.09 ng/ml for the 72 bp fragment, apparently improved more than 1000-fold in comparison with UV detection. Although the RSD of peak areas (n = 3) was around 15.5% for the sample was electrokinetically injected, good linearity of peak area response showed that the proposed method is suitable for quantitative analysis.     

Pilot-Scale Experiment for Simultaneous Dioxin and NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Removal from Garbage Incinerator Emissions Using the Pulse Corona Induced Plasma Chemical Process

A pilot-scale pulse corona induced plasma chemical process (PPCP) reactor for controlling gas-phase dioxins and NO _x simultaneously is installed in a garbage incineration plant. The flow rate of the sampled flue gas is 5,000 Nm³/h (N: standard state) in maximum at the PPCP reactor, which consists of 22 wire-cylinder electrodes and is energized by a 50 kW nanosecond pulse high voltage generator. With an applied plasma energy density of 2.9–6.1 Wh/Nm³, the decomposition efficiency for dioxins is 75–84% based on TEQ (toxic equivalents); the conversion efficiency of NO to NO₂ is ~93% at maximum. The flue gas treated by the PPCP reactor is introduced at a rate of 50 Nm³/h to a wet-type chemical reactor, which uses an aqueous solution of sodium sulfite (Na₂SO₃). More than 90% of NO _x is reduced to nitrogen, with negligible byproducts such as NO₂ ⁻ or NO₃ ⁻ ions left in the solution.     

Transmission electron microscopy study of phase morphology in polypropylene/ethylene-octene copolymer blends

Blends of polypropylene (PP) and ethylene-octene copolymers (EOC) were investigated by transmission electron microscopy (TEM) and by differential scanning calorimetry (DSC). The EOC contained 28, 37, 40 or 52 wt% of octene. Only the 50/50 PP/EOC ratio was used for all blends. None of the blends was fully miscible, there was always two-phase morphology. TEM observation followed by image analysis by ImageJ software revealed that the largest particles were in blend containing EOC-28 and the smallest were in blend with EOC-52. The coarsening rate at 200 °C was evaluated by TEM. The glass transition temperature (T_g) shift indicated partial miscibility. Partial miscibility was then confirmed by direct observation of bright PP lamellae in EOC dark phase.     

Synthesis of metallic copper nanoparticles coated with polypyrrole

This paper describes a method for polypyrrole (PPy) coating of metallic Cu nanoparticles in aqueous solution in atmosphere. Colloid solution of Cu nanoparticles was prepared by reducing Cu ions with the use of hydrazine in an aqueous solution dissolving citric acid and cetyltrimethylammonium bromide as stabilizers. The PPy coating was performed by polymerizing pyrrole with the use of hydrogen peroxide as an initiator in an aqueous colloid solution of the Cu nanoparticles. Ultraviolet–visible extinction measurements, transmission electron microscopy observation, and X-ray diffraction measurements revealed that the metallic Cu nanoparticles with a size of 27.6 ± 11.1 nm were coated with PPy. The obtained PPy-coated Cu particles were chemically stable even in atmosphere.