The structure of defect Ru4Si3

The nature of the defect structure of Ru₄Si₃ has been studied with electron diffraction and electron microscopy methods. Lattice image pictures, interpreted with histogram analysis, reveal that planar defects of chemical twinning type are common in the crystals.     

N-methylpiperazinocarbonyl-2',3'-BcNA and 4'-C-(N-methylpiperazino)methyl-DNA: introduction of basic functionalities facing the major groove and the minor groove of a DNA:DNA duplex

Piperazino-functionalized 2',3'-BcNA and 4'-C-hydroxymethyl-DNA are appropriate molecular architectures for the introduction of basic functionalities facing the major groove and the minor groove of nucleic acid duplexes, respectively. 4'-C-(N-Methylpiperazino)methyl-DNA monomers induce significantly increased thermal stability of a DNA:DNA duplex.     

A Preparatively Simple Access to Homochiral Heterocyclic α-Hydroxy Acids and their Derivatives

 The synthesis of homochiral heterocyclic α-hydroxy acids starting from (S)- and (R)-malic acid using hexafluoroacetone as protecting and activating agent is described. The new compounds are useful building blocks for peptide and depsipeptide modification.     

Thermodynamics of complex formation in dimethyl sulfoxide with ligands coordinating via N,P, As,Sb, OR Bi : III. A comparison between aromatic and aliphatic amines and phosphines

The stabilities of the complexes formed by silver(I), cadmium(II) and zinc(II) with tri-n-butylamine and tri-n-butylphosphine have been determined in dimethyl sulfoxide (DMSO). For the two latter metal ions, it has also been found that complexes are not formed in appreciable amounts with the triphenyl compounds Ph₃X, X = N, P and, in the case of cadmium(II), also As.From these and earlier measurements referring to DMSO as well as aqueous solutions, it was found that the stepwise stability constants increase by roughly one power of ten for each aromatic ring replaced by an aliphatic group, evidently as a consequence of the improved donor properties of the coordinating atoms. Further, for ligands of the same type, the stabilities are always markedly lower in DMSO than in aqueous solution. This is certainly due to the fact that the solvent molecules compete more strongly for the coordination sites in DMSO than in water, as reflected by the larger heats of solvation found in the former solvent for the metal ions concerned.     

Cyclodextrins as chiral stationary phases in capillary gas chromatography. Part VII: Cyclodextrins with an inverse substitution pattern – synthesis and enantioselectivity

Transferring the site of specific substitution of dipentylated cyclodextrins with methyl or acyl residues from the secondary 3-hydroxyl group to the primary 6-hydroxyl group was expected to provide new information on the mechanism of chiral recognition. The 3-position points towards and the 6-position points away from the cyclodextrin cavity which via inclusion complex formation is supposed to play a major role in chiral separation. The “inverse” 6-O-acyl-2,3-di-O-pentyl-cyclodextrins displayed almost no enantioselectivity but the corresponding 6-O-methyl derivatives are a versatile supplement to the chiral capillary GC phases nowadays available. Among the compounds that could be enantiomerically resolved are alcohols, amino acids, alkyl halides, bicyclic ethers, acetals, olefins, other hydrocarbons and chiral pharmaceuticals.     

Microdevices for manipulation and accumulation of micro- and nanoparticles by dielectrophoresis

Microfluidic devices with three-dimensional (3-D) arrays of microelectrodes embedded in microchannels have been developed to study dielectrophoretic forces acting on synthetic micro- and nanoparticles. In particular, so-called deflector structures were used to separate particles according to their size and to enable accumulation of a fraction of interest into a small sample volume for further analysis. Particle velocity within the microchannels was measured by video microscopy and the hydrodynamic friction forces exerted on deflected particles were determined according to Stokes law. These results lead to an absolute measure of the dielectrophoretic forces and allowed for a quantitative test of the underlying theory. In summary, the influence of channel height, particle size, buffer composition, electric field, strength and frequency on the dielectrophoretic force and the effectiveness of dielectrophoretic deflection structures were determined. For this purpose, microfluidic devices have been developed comprising pairs of electrodes extending into fluid channels on both top and bottom side of the microfluidic channels. Electrodes were aligned under angles varying from 0 to 75 degrees with respect to the direction of flow. Devices with channel height varying between 5 and 50 microm were manufactured. Fabrication involved a dedicated bonding technology using a mask aligner and UV-curing adhesive. Particles with radius ranging from 250 nm to 12 microm were injected into the channels using aqueous buffer solutions.     

Cathodoluminescence Depth Profiling in SiO2:Ge Layers

 For investigation of the luminescent center profile cathodoluminescence measurements are used under variation of the primary electron energy E ₀ = 2…30 keV. Applying a constant incident power regime (E ₀·I ₀ = const), the depth profiles of luminescent centers are deduced from the range of the electron energy transfer profiles dE/dx. Thermally grown SiO₂ layers of thickness d = 500 nm have been implanted by Ge⁺-ions of energy 350 keV and doses (0.5–5)10¹⁶ ions/cm². Thus Ge profiles with a concentration maximum of (0.4 – 4) at% at the depth of d_m≅240 nm are expected. Afterwards the layers have been partially annealed up to T _a = 1100 °C for one hour in dry nitrogen. After thermal annealing, not only the typical violet luminescence (λ = 400 nm) of the Ge centers is strongly increased but also the luminescent center profiles are shifted from about 250 nm to 170 nm depth towards the surface. This process should be described by Ge diffusion processes, precipitation and finally Ge nanocluster formation. Additionally, a Ge surface layer is piled-up extending to a depth of roughly 25 nm.     

An Improved Method for Preparation of Carboxylic Esters Using CsF-Celite/Alkyl Halide/Ch3Cn Combination

Preparations of compound 4 and of truxene derivatives 5, 6a,b, 7, 8, 10a, b, 11, 12a,b, and 13a,b are described. These substances are potential starting materials for the synthesis of bowl shaped polyaromatic compounds containing structural elements of fullerenes.     

Engineering a Small HOMO–LUMO Gap and Intramolecular C−H Borylation by Diborene/Anthracene Orbital Intercalation

The diborene 1 was synthesized by reduction of a mixture of 1,2-di-9-anthryl-1,2-dibromodiborane(4) ( 6 ) and trimethylphosphine with potassium graphite. The X-ray structure of 1 shows the two anthryl rings to be parallel and their π(C₁₄) systems perpendicular to the diborene π(B=B) system. This twisted conformation allows for intercalation of the relatively high-lying π(B=B) orbital and the low-lying π* orbital of the anthryl moiety with no significant conjugation, resulting in a small HOMO–LUMO gap (HLG) and ultimately a C−H borylation of the anthryl unit. The HLG of 1 was estimated to be 1.57 eV from the onset of the long wavelength band in its UV/Vis absorption spectrum (THF, λ_onset=788 nm). The oxidation of 1 with elemental selenium afforded diboraselenirane 8 in quantitative yield. By oxidative abstraction of one phosphine ligand by another equivalent of elemental selenium, the B−B and C¹−H bonds of 8 were cleaved to give the cyclic 1,9-diborylanthracene 9 .     

Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.